Manuel d'utilisation / d'entretien du produit DI-624M du fabricant D-Link
Aller à la page of 104
.
2 DI-624M User’ s Manual D-Link Systems, Inc. T able of Contents T able of Contents Package Contents ............................................................................... 4 Minimum System Requirements ......................................
3 DI-624M User’ s Manual D-Link Systems, Inc. T able of Contents System ........................................................................................................ 3 8 Firmware ...........................................................
4 DI-624M User’ s Manual D-Link Systems, Inc. Package Contents Package Contents D-Link DI-624M Super G MIMO Wireless Router CA T -5 Ethernet Cable (All the DI-624M’ s Ether net por ts are A uto-MDIX) P o wer Adapter (5.
5 DI-624M User’ s Manual D-Link Systems, Inc. Introduction Introduction The D-Link DI-624M Super G MIMO Wireless Router is an 802.11g high-perf or mance , wireless router that suppor ts high-speed wireless networking at home, at work or in public places.
6 DI-624M User’ s Manual D-Link Systems, Inc. Features and Benefits Features and Benefits Fully compatible with the 802.11g standard to provide a wireless data rate of up to 108Mbps Backwards compatible with the 802.
7 DI-624M User’ s Manual D-Link Systems, Inc. Hardware Overview Hardware Over view Connections DC P ower Connector The DC power input connector is labeled DC 5V with a single jack socket to supply power to the DI-624M.
8 DI-624M User’ s Manual D-Link Systems, Inc. Hardware Overview LEDs WLAN LED A solid light indicates that the wireless segment is ready . This LED blinks during wireless data transmission. W AN LED A solid light indicates connection on the W AN por t.
9 DI-624M User’ s Manual D-Link Systems, Inc. Wireless Basics Wireless Basics D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless connectivity within your home, business or public access wireless networks.
10 DI-624M User’ s Manual D-Link Systems, Inc. Wireless Basics Installation Considerations The D-Link DI-624MSuper G MIMO Wireless Router lets you access y our network, using a wireless connection, from vir tually anywhere within its operating range .
11 DI-624M User’ s Manual D-Link Systems, Inc. Getting Started Getting Started Please remember that D-Link Super G MIMO wireless devices are pre-configured to connect together , right out of the bo x, with their default settings .
12 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Using the Configuration Menu Whenever you want to configure your DI-624M, you can access the Configuration Menu b y opening the W eb-browser and typing in the IP Address of the DI-624M.
13 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Wizard The Home>Wizard screen will appear . Please ref er to the Quick Installation Guide fo r more information regarding the Setup Wizard. These buttons appear on most of the configuration screens in this section.
14 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Wireless Service Set Identifier (SSID) is the name designated for a specific wireless local area network (WLAN).
15 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Capable of P ac ket Bursting, F astF rames, Compression, and no T urbo mode. Capable of P ac ket Bursting, F astF rames, Compression, and Dynamic T urbo . This setting is backw ards compatible with non- T urbo (legacy) devices .
16 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu WAN Dynamic IP Address Home > WAN > Dynamic IP Address Choose Dynamic IP Address to obtain IP Address information automatically from y our ISP . Select this option if your ISP does not giv e you an y IP numbers to use.
17 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu The def ault MA C address is set to the W AN’ s physical interf ace MA C address on the Broadband Router .
18 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Choose Static IP Address if all W AN IP inf ormation is provided to y ou by y our ISP . Y ou will need to enter in the IP address, subnet mask, gateway address, and DNS address(es) provided to y ou by y our ISP .
19 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu PPPoE Home > WAN > PPPoE Please be sure to remov e any e xisting PPP oE client software installed on y our computers. Choose PPP oE (P oint to P oint Protocol ov er Ether net) if your ISP uses a PPP oE connection.
20 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Choose this option if your ISP uses PPP oE. (Most DSL users will select this option.) Dynamic PPP oE: Receive an IP Address automatically from your ISP . Static PPP oE: Y ou hav e an assigned (static) IP Address.
21 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu LAN is shor t for Local Area Network. This is considered your internal networ k. These are the IP settings of the LAN interf ace f or the DI-624M. These settings may be ref erred to as Private settings.
22 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu DHCP stands f or Dynamic Host Control Protocol . The DI-624M has a b uilt-in DHCP ser v er . The DHCP Ser v er will automatically assign an IP address to the computers on the LAN/private network.
23 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Virtual Server The DI-624M can be configured as a vir tual ser v er so that remote users accessing Web or FTP services via the public IP address can be automatically redirected to local servers in the LAN (Local Area Network).
24 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Select Enabled or Disabled . Enter the name ref erencing the vir tual ser vice. The server computer in the LAN (Local Area Network) that will be providing the vir tual services.
25 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu If you have an FTP server that you wanted Internet users to access by W AN por t 2100 and only during the week ends , y o u would need to enable it as such. FTP server is on LAN computer 192.
26 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Some applications require multiple connections, such as Internet gaming, video conf erencing, Inter net telephony and others . These applications hav e difficulties working through NA T (Networ k Address T ranslation).
27 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Filters Filters are used to deny or allow LAN (Local Area Network) computers from accessing the Internet. The DI-624M can be setup to deny internal computers by their IP or MA C addresses.
28 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu MAC Filters Use MAC (Media Access Control) Filters to allow or deny LAN (Local Area Network) computers by their MA C addresses from accessing the Network.
29 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu URL Blocking is used to deny LAN computers from accessing specific web sites by the URL.
30 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Domain Blocking Domain Blocking is used to allow or deny LAN (Local Area Network) computers from accessing specific domains on the Internet. Domain blocking will deny all requests to a specific domain such as http and ftp .
31 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Firewall Firewall Rules is an advanced feature used to deny or allow traffic from passing through the DI-624M. It wor ks in the same w ay as IP Filters with additional settings .
32 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu If you have a client PC that cannot run Internet applications properly from behind the DI-624M, then you can set the client up for unrestricted Internet access. It allows a computer to be e xposed to the Inter net.
33 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Performance Auto is the default selection. Select from the drop down menu. 100% is the default selection. Select from the drop down menu. Beacons are pack ets sent by an Access P oint to synchronize a wireless network.
34 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu (Delivery T raffic Indication Message) 3 is the def ault setting. A DTIM is a countdown informing clients of the next window for listening to broadcast and multicast messages.
35 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu At this page, the DI-624M administrator can change the system pass word. There are two accounts that can access the Broadband Router’ s W eb-Management interf ace. They are admin and user .
36 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu admin is the Administrator login name. Enter the password and enter again to confirm. user is the User login name. Enter the password and enter again to confirm Remote management allows the DI-624M to be configured from the Inter net b y a web bro wser .
37 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Time Select the Time Zone from the pull-down men u. NTP is shor t f or Network Time Protocol. NTP synchronizes computer clock times in a netw ork of computers. This field is optional.
38 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu System Browse The current system settings can be sav ed as a file onto the local hard drive . The sa ved file or any other sa v ed setting file can be loaded back on the Broadband Router .
39 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Firmware Y ou can upgrade the firmware of the Router here . Mak e sure the firmware you w ant to use is on the local hard drive of the computer . Click on Bro wse to browse the local hard drive and locate the firmware to be used f or the update.
40 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Misc. T ools > Misc..
41 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu The Ping T est is used to send Ping packets to test if a computer is on the Internet. Enter the IP Address that you wish to Ping, and click Ping . Click Reboot to restar t the DI-624M.
42 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Device Info This page displa ys the current inf or mation for the DI-624M. It will displa y the LAN, W AN and MA C address inf or mation. If y our W AN connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed.
43 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu IP Address: W AN/Public IP Address Subnet Mask: W AN/Public Subnet Mask Gatew ay: W AN/Public Gate wa y IP Address Domain .
44 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu The Broadband Router keeps a running log of events and activities occurring on the Router . If the de vice is rebooted, the logs are automatically cleared. Y ou ma y sav e the log files under Log Settings.
45 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Log Settings Not only does the Broadband Router display the logs of activities and events, it can setup to send these logs to another location. The address of the SMTP server that will be used to send the logs.
46 DI-624M User’ s Manual D-Link Systems, Inc. Using the Configuration Menu Stats The screen abo ve displa ys theT raffic Statistics. Here you can vie w the amount of pack ets that pass through the DI-624M on both the W AN and the LAN por ts. The traffic counter will reset if the device is rebooted.
47 DI-624M User’ s Manual D-Link Systems, Inc. T roubleshooting T roubleshooting This Chapter provides solutions to problems that can occur during the installation and operation of the DI-624M Wireless Broadband Router . W e cover v ar ious aspects of the network setup, including the netw ork adapters.
48 DI-624M User’ s Manual D-Link Systems, Inc. T roubleshooting 2. The wireless c lient cannot access the Internet in the Infrastructure mode . Make sure the wireless client is associated and joined with the correct Access P oint.
49 DI-624M User’ s Manual D-Link Systems, Inc. T roubleshooting 3. Chec k that the drivers f or the network adapter s are installed pr operl y . Y ou ma y be using different network adapters than those illustrated here , but this procedure will remain the same, regardless of the type of network adapters you are using.
50 DI-624M User’ s Manual D-Link Systems, Inc. T roubleshooting Double-click on Network Adapters . Right-clic k on D-Link D WL-G650M Super G MIMO Wireless Notebook Adapter . (In this e xample we use the D WL-G650M; you ma y be using other network adapters, but the procedure will remain the same.
51 DI-624M User’ s Manual D-Link Systems, Inc. T roubleshooting 4. What v ariables ma y cause m y wireless pr oducts to lose reception? D-Link products let you access y our networ k from vir tually an ywhere you w ant. How e v er , the positioning of the products within your environment will affect the wireless range.
52 DI-624M User’ s Manual D-Link Systems, Inc. T roubleshooting 7. I f or got m y encryption key . Reset the DI-624M to its factory default settings and restore the other devices on your netw ork to their default settings. Y ou ma y do this by pressing the Reset b utton on the bac k of the unit.
53 DI-624M User’ s Manual D-Link Systems, Inc. T echnical Specifications Standards IEEE 802.11g IEEE 802.11b IEEE 802.3 IEEE 802.3u VPN P ass Through/ Multi-Sessions PPTP L2T.
54 DI-624M User’ s Manual D-Link Systems, Inc. T echnical Specifications LEDs: Po w e r WA N LAN (10/100) WLAN (Wireless Connection) Physical Dimensions: L = 7.
55 DI-624M User’ s Manual D-Link Systems, Inc. T echnical Specifications 9 Mbps 6 Mbps 5.5 Mbps 2 Mbps 1 Mbps Receiver Sensitivity: 108Mbps 54Mbps OFDM, 10% PER, -71dBm .
56 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Frequently Asked Questions 1 Wh y can´t I access the W eb based configuration? When entering the IP Address of the DI-624M (192.168.0.1), you are not connecting to the Inter net or ha ve to be connected to the Internet.
57 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions What´s the difference between a crossover cable and a straight-through cable? The wir ing in crosso ver and straight-through cab les are diff erent. The two types of cabl e have different purposes for different LAN configurations.
58 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 2: Disable an y Inter net security software r unning on the computer . Software firew alls like Zone Alarm, Black Ice , Sygate, Nor ton P ersonal Fire wall, etc. might bloc k access to the configuration pages.
59 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Nothing should be checked. Click OK . Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK . Go to the desktop and close any open windows.
60 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions The IP Configuration window will appear , displaying y our Ethernet Adapter Information . Select your adapter from the drop down menu. If you do not see your adapter in the drop down menu, your adapter is not properly installed.
61 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions F rom the Command Prompt, enter ipconfig . It will retur n y our IP Address, subnet mask, and def ault gate wa y . T ype e xit to close the command prompt. Make sure y ou tak e note of y our computer´s Def ault Gatew a y IP Address .
62 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Click Specify an IP Address . Enter in an IP Address that is on the same subnet as the LAN IP Address on your router . Example: If the router´s LAN IP Address is 192.
63 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Click on the DNS Configuration tab . Click Enable DNS . T ype in a Host (can be any word). Under DNS ser v er search order , enter the LAN IP Address of y our router (192.
64 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Ho w can I assign a Static IP Address in Windo ws 2000? Right-click on My Network Places and select Properties . Right-click on the Local Area Connection which represents your network card and select Properties .
65 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions The Secondary DNS is not needed or enter a DNS ser v er from y our ISP .
66 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 2: Clic k the Home tab and click the WA N button. Dynamic IP Address is the default value , howe ver , if Dynamic IP Address is not selected as the W AN type, select Dynamic IP Address by clicking on the radio button.
67 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 3: P o wer cycle the cab le modem and router . T u rn the cable modem off (first) . T ur n the router off Lea ve them off f or 2 minutes.** T ur n the cable modem on (first).
68 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 3: Click on Apply and then click Continue to save the changes. Step 4: Click the Status tab and click the Device Inf o button. Y our IP Address inf or mation will be displa yed under the WA N heading.
69 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 3: After the router stabilizes, open your browser and enter 192.168.0.1 into the address window and hit the Enter k ey . When the pass word dialog bo x appears, enter the username admin and leave the password blank.
70 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions 4 Can I use m y D-Link Br oadband Router to share m y Internet connection pr o vided b y A OL DSL Plus? In most cases ye s . AOL DSL+ ma y use PPP oE for authentication b ypassing the client software.
71 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 3: Check Enab led to activ ate entr y . Step 4: Enter a name for y our vir tual ser ver entr y . Step 5: Ne xt to Private IP , enter the IP Address of the computer on y our local network that you w ant to allo w the incoming ser vice to .
72 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions 6 What is DMZ? Demilitarized Zone: In computer networks, a DMZ (demilitarized zone) is a computer host or small network inser ted as a neutral zone betw een a company´s private netwo r k and the outside pub lic network.
73 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 2: Log into the web based configuration of the router by typing in the IP Address of the router (def ault:192.
74 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions 8 Ho w do I open a rang e of por ts on m y DI-624M using Firewall rules? Step 1: Access the router’ s Web configuration b y enter ing the router’ s IP Address in your W eb browser .
75 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 6: Enter the por t or range of por ts that are required to be open f or the incoming service. Step 7: Click Apply and then click Continue . Note: Make sure DMZ host is disabled.
76 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 3: Enter the inf ormation as seen below . The Private IP is the IP Address of the computer on your local network that y ou want to connect to . Step 4: The first entr y will read as sho wn abov e.
77 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 7: Click Apply and then click Continue . Step 8: Create a third and final entry as shown below: Step 9: Click Apply and then click Continue . Step 10: Run PCAnywhere from the remote site and use the W AN IP Address of the router , not your computer´s IP Address.
78 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 2: Click on Advanced and then click Firewall . Step 3: Create a new firewall rule: Click Enabled . Enter a name (edonk ey). Click Allow . Ne xt to Source, select WA N under interf ace .
79 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 2: Open your web browser and enter the IP Address of the router (192.168.0.1). Enter username (admin) and your password (blank by default). Step 3: Click on the Ad v anced tab and then click on Virtual Server on the left side.
80 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 3: Y ou will create 2 entries. Step 4: Click Enabled and enter Settings: NAME - Gamespy1 PRIV A TE IP - The IP Address of your computer that y ou are running Gamespy from.
81 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 5: Enter 2nd entry: Click Enabled. Enter the following information: NAME - Gamespy2 PRIV A TE IP - The IP Address of y our computer that y ou are r unning Gamesp y from. PRO TOCOL TYPE - Both PRIV A TE POR T - 6500 PUBLIC PORT - 6500 SCHEDULE - Always.
82 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions 14 Ho w do I configure m y r outer f or KaZaA and Grokster? The f ollowing is f or KaZaA, Grokster , and others using the F astT rac k P2P file shar ing system. In most cases, you do not have to configure anything on the router or on the Kazaa software.
83 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions 15 Ho w do I configure m y r outer to pla y W ar craft 3? Y ou must open por ts on your router to allo w incoming traffic while hosting a game in W arcraft 3. T o play a game , you do not ha v e to configure your router .
84 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Y ou will need to change the por t inf or mation within the W arcraft 3 software f or computers #2 and up . Configure the Game P or t inf ormation on each computer: Star t W arcraft 3 on each computer , click Options > Gamepla y .
85 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Ne xt to Source , select WA N under interf ace. In the first box, enter an * . Leav e the second bo x empty . Next to Destination, select LAN under interface. Enter the IP Address of the computer you are running iChat from.
86 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions Step 4: Click Apply and then Continue . Step 5: Repeat steps 3 and 4 enter ichat2 and open por ts 16384-16403 (UDP). For File Sharing: Step 1: Click on Ad v anced and then Vir tual Server .
87 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions If using Mac OS X Firewall, you may need to temporarily turn off the firewall in the Sharing preference pane on both computers. T o use the Mac OS X Firew all, you must open the same por ts as in the router: Step 1: Choose Apple menu > System Preferences .
88 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions 17 How do I send or receive a file via iChat when the Mac OSX firewall is active? -for Macintosh users- Mac OS X 10.
89 DI-624M User’ s Manual D-Link Systems, Inc. Frequently Asked Questions 18 What is NA T? NA T stands for Netw ork Address T ranslator . It is proposed and descr ibed in RFC- 1631 and is used for solving the IP Address depletion prob lem.
90 DI-624M User’ s Manual D-Link Systems, Inc. Appendix Appendix Securing Y our Network 1 . Change Admin Password Changing the password to access your new router is the first step in securing your network. This can done through the Wizard or on the Admin P age of the T ools tab .
91 DI-624M User’ s Manual D-Link Systems, Inc. Appendix Glossar y A Access Control List - ACL. Database of network devices that are allowed to access resources on the network.
92 DI-624M User’ s Manual D-Link Systems, Inc. Appendix Br oadcast – T r ansmitting data in all directions at once Browser – A program that allows you to access resources on the web and provides.
93 DI-624M User’ s Manual D-Link Systems, Inc. Appendix DNS – Domain Name System. T ranslates Domain Names to IP addresses DOCSIS – Data Over Cable Service Interface Specifications .
94 DI-624M User’ s Manual D-Link Systems, Inc. Appendix H H.323 – A standard that provides consistency of voice and video transmissions and compatibility for videoconferencing devices Half-duplex .
95 DI-624M User’ s Manual D-Link Systems, Inc. Appendix IPsec – Internet Protocol Security IPv6 – Internet Protocol V ersion 6 uses 128-bit addresses and was de veloped to solve the prob lem tha.
96 DI-624M User’ s Manual D-Link Systems, Inc. Appendix N NA T – Network Address T ranslation allo ws many private IP addresses to connect to the Internet, or another network, through one IP address NetBEUI – NetBIOS Extended User Interface is a Local Area Netw ork communication protocol.
97 DI-624M User’ s Manual D-Link Systems, Inc. Appendix Q QoS – Quality of Service R RADIUS – Remote Authentication Dial-In User Service allows for remote users to dial into a central server and.
98 DI-624M User’ s Manual D-Link Systems, Inc. Appendix Thr oughput – The amount of data that can be transf erred in a giv en time per iod T racer oute – A utility displa ys the routes between y.
99 DI-624M User’ s Manual D-Link Systems, Inc. Contacting T echnical Support Y ou can find software updates and user documentation on the D-Link w ebsite . D-Link provides free technical suppor t f or customers within the United States and within Canada for the duration of the warranty period on this product.
100 DI-624M User’ s Manual D-Link Systems, Inc. Getting Started W arranty Subject to the terms and conditions set for th herein, D-Link Systems , Inc.
101 DI-624M User’ s Manual D-Link Systems, Inc. Warranty product is being sold “As-Is” without any warranty whatsoever including, without limitation, the Limited W arranty as described herein, notwithstanding anything stated herein to the contrary .
102 DI-624M User’ s Manual D-Link Systems, Inc. Warranty Limitation of Liability: T O THE MAXIMUM EXTENT PERMITTED BY LA W , D-LINK IS NO T LIABLE UNDER ANY CONTRACT , NEGLIGENCE, STRICT LIABILITY O.
103 DI-624M User’ s Manual D-Link Systems, Inc. Warranty FCC Caution: The manuf acturer is not responsible f or any radio or TV interf erence caused by unauthorized modifications to this equipment; such modifications could void the user’ s authority to operate the equipment.
104 DI-624M User’ s Manual D-Link Systems, Inc. Registration (12/27/04) Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté D-Link DI-624M c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du D-Link DI-624M - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation D-Link DI-624M, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le D-Link DI-624M va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le D-Link DI-624M, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du D-Link DI-624M.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le D-Link DI-624M. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei D-Link DI-624M ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
