Manuel d'utilisation / d'entretien du produit DKVM-16 du fabricant D-Link
Aller à la page of 30
Manual Building Networks for People 08/26/03 D-Link DKVM-16 16-Port Keyboard, Video, and Mouse Switch V ersion 1.2.
2 Content s Package Contents ................................................................................ 3 Introduction ............................................................................................ 4 Features and Benefits .........
3 Package Content s System Requirement s: ! ! ! ! Console Computer One VGA, SVGA, or Multisync monitor One PS/2 mouse or serial (DB-9) mouse port One PS/2 keyboard or A T (5-pin DIN) keyboard port One.
4 Introduction The D-Link DKVM-16 is a Keyboard, Video and Mouse KVM switch that allows you to control up to 16 server computers using one keyboard, mouse, and monitor .
5 Features and Benefit s * * Allows users to control sixteen computers from one keyboard, mouse, and monitor No software is required; each channel has a dedicated microprocessor to intelligently manag.
6 Hardware Inst allation Front Panel Layout Rear Panel Layout Current Active Bank Display Current Active Port Display Bank Select Port Select Power Switch VGA Signal PS/2 Mouse Daisy-Chain In Port PC .
7 Hardware Inst allation (Continued) Find a convenient place to place your DKVM-16 . Its 19" rack mount form fac- tor makes it mountable on a 19" rack. When mounting to a rack, attach the included brackets to the side p anels of the DKVM-16 .
8 Hardware Inst allation (Continued) Connect the keyboard console to the DKVM-16 . If you have an A T type key- board, you will need an A T to PS/2 adapter . Connect the mouse console to the DKVM-16 . If you have an older mouse with 9 pins, you will need to use the 9 to 5 pin mouse converter that is included with the DKVM-16 .
9 Hardware Inst allation (Continued) Step 5 Step 6 Connect one end of the included VGA cable (15-pin HDDB Male / Male) to the female connectors on the back of the PC. Connect the other end of the cable to the rear panel of the DKVM-16 . This step can be repeated for all PCs.
10 Hardware Inst allation (Continued) Step 7 Using the included 3-in-1 cable, locate the keyboard connector (purple) and connect one end to the PS/2 keyboard port on the back panel of the computer , and the other end to the PC1 PS/2 keyboard port on the back panel of the DKVM-16 .
11 Hardware Inst allation (Continued) Step 1 1 Now power up all computers simultaneously . The first computer will be shown on the monitor . Y ou may check to see if the mouse, keyboard, and monitor work after the computer has booted up.
12 Using the DKVM-16 The “Power On” St ate of the DKVM-16 When you power on the KVM switch, it will prompt you for the password; the default value is eight zeros – “00000000”. Please enter eight zeros and enter the same value in the retype field.
13 Using the DKVM-16 (Continued) The Reset Button Pressing the select and bank button of the master switch simultaneously will reset the KVM switch. This reset action returns the KVM switch back to the initial state and will also recheck all of the slave banks which are connected to the master DKVM-16 .
14 Note: Bank no. and port no. selection must be made using the numeric keys on the keyboard. Numeric keys on the keypad are not available as a hot key command. Note: If you are trying to access a single digit port no. precede the port no. with a zero (0).
15 Using the DKVM-16 (Continued) Hot Key Commands (Continued) This screen will appear on your monitor Note: The Rom reflash command will take approximately 1-2 minutes.
16 Daisy-Chaining the DKVM-16 Connect your keyboard, mouse, and monitor to the console port (white color block) of the master KVM bank (bank1). Please closely follow the steps below to daisy-chain your DKVM-16 unit s. Y ou can daisy chain up to 8 DKVM-16 s.
17 Hot Plug The DKVM-16 supports the “Hot Plug” function for easy addition or removal of PCs. The user can arrange or maintain PCs as follows: 1. A PC can be disconnected and reconnected to the same or different port of the DKVM-16 without having to power it off as long as it is not the master daisy-chain port.
18 On Screen Display Operation When you select the On Screen Display Operation manual window using the “Hot Key” function, the following on screen display will appear on your monitor . BA NK : 1 Bank number PC Name List. Factory de- fault names are listed.
19 On Screen Display Operation (Continued) CHANGE P ASSWORD The Change Password function allows the user to change the password used to access all connected PC systems. The default password is 8 digits, “00000000”. The Enter Password window appears when you select this item and press enter .
20 On Screen Display Operation (Continued) ARROW KEYS ( ! ! ! ! ! / " " " " " ) Y ou can use the up arrow key “ ! ” or the down arrow key “ " ” to select the port destination by PC name. Af ter you have selected the PC port, you can press the “ENTER” Key to select the PC port you want immediately .
21 T roubleshooting General Problems Monitor/VideoProblems Q: The OSD menu does not display a “ “ on a channel where a computer is connected and powered up. A: DKVM-16 updates “ “ every 2 seconds. Use the hot key to access the OSD menu again and it should re-detect all the active channels.
22 Check the cables and make sure that they are connected prop- erly to the correct ports. T roubleshooting (Continued) Keyboard Problems Q: The keyboard is not detected or a keyboard error is reported during boot-up. A: ! Check to make sure that the power adapter is plugged in and is working properly .
23 Check the cables and make sure that they are connected prop- erly to the correct ports. T roubleshooting (Continued) Q: The computer boot s up correctly , but the mouse does not work. A: ! Make sure that the mouse works when plugged into the com- puter .
24 Make sure that the mouse is a Microsoft® Intellimouse® or Microsoft® Intellimouse® Explorer®. T roubleshooting (Continued) ! The DKVM-16 does not support special wheel functions of cer- tain mice. ! Q: The power switch is off or the power adapter is unplugged, but the switch still works.
25 S pecifications Computer Connections : 16 Display LED Indication : 3 Keyboard : 6-pin Mini-DIN Female Mouse : 6-pin Mini-DIN Female Monitor : 15-pin HD DB type Female Cascade : T wo 6-pin Mini-DIN + One 15-pin HDDB Cascade Port : 1 On Screen Display : Y es 19” Rack Mount : Y es Cascade (Level) : 8 Max.
26 Subject to the terms and conditions set forth herein, D-Link Systems, Inc. (“D-Link”) provides this Limited warranty for its product only to the person or entity that originally purchased the p.
27 Submitting A Claim : The customer shall return the product to the original purchase point based on its return policy . In case the return policy period has expired and the product is within warrant.
28 Governing Law : This Limited W arranty shall be governed by the laws of the S tate of California. Some states do not allow exclusion or limitation of incidental or consequential damages, or limitations on how long an implied warranty lasts, so the foregoing limit ations and exclusions may not apply .
29 T echnical Support Y ou can find software updates and user document ation on the D-Link website. D-Link provides free technical support for customers within the United S tates and within Canada for the duration of the warranty period on this product.
30.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté D-Link D-Link DKVM-16 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du D-Link D-Link DKVM-16 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation D-Link D-Link DKVM-16, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le D-Link D-Link DKVM-16 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le D-Link D-Link DKVM-16, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du D-Link D-Link DKVM-16.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le D-Link D-Link DKVM-16. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei D-Link D-Link DKVM-16 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
