Manuel d'utilisation / d'entretien du produit 315.1152 du fabricant Craftsman
Aller à la page of 19
Operator's Manual 3/8 in. CORDLESS DRILL-DRIVER Variable Speed / Reversible Model No. 315.115200 13.2 Volt 315.115210 15.6 Volt Save this manual for future reference ,_ WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product.
• Warranty .......................................................................................................................................................................... 2 • lntroducton .................................................
WARNING: READ AND UNDERSTAND ALL IN- STRUCTIONS. Failure to fo{Iow a(I {nstruct(ons {{sted be(ow, may result {n electric shock, fire and/or seri- ous personal injury. SAVE THESE INSTRUCTIONS WORK AREA • Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents.
SERVICE • Tool service must be performed only by qualified repair personnel, Service or maintenance performed by unqualified personnel may result in a risk of injury. • When servicing a tool, use only identical replace= ment parts. Follow instructions in the Maintenance section of this manual.
WARNING: Never use a battery that has been dropped or received a sharp blow. A damaged battery is subject to explosion. Properly dispose of a dropped battery immediately.
Some of the following symbols may be used on this tool. Please study them and learn their meaning. Proper interpreta- tion of these symbols will allow you to operate the tool better and safer.
The followingsignal words and meanings are intendedto explainthe levels of risk associated with this product, SYMBOL SIGNAL MEANING DANGER: WARNING: CAUTION: CAUTION: Indicates an imminently hazardous situation, which, if not avoided, will result in death or serious injury.
PRODUCT SPECIFICATIONS DRILL-DRIVER 315,115200 315.115210 Chuck 3/8 in. Keyless 3/8 in. Keyiess Motor 13.2 Volts 15.6 Volts Gear Train One Speed One Speed Switch Variable Speed VariabJe Speed No Load Speed 0-600imin 0-600/rain Battery 130139018 130139015 Maximum Torque 100 in.
KEYLESS CHUCK TORQUE ADJUSTMENT RING BIT STORAGE SCREWDRIVER BITS BATTERY SWITCH TRIGGER DIRECTION OF ROTATION SELECTOR (FORWARD / REVERSE) CHARGING STAND RED LIGHT CHARGER BATTERY PACK SHOWN IN TOOL WRIST STRAP Fig. 1 Instructions Your drill has been sh(pped comp(etely assembled.
_1 WARNING: Do not allow familiarity with this tool to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury. CHARGING BATTERY PACK See Figure 1, Page 9 The battery pack for this tool has been shipped in a low charge condition to prevent possible problems.
SWITCH See Figure 2, To turn your drill ON, depress the switch trigger. To turn it OFF, release the switch trigger. FORWARD/REVERSE/CENTER LOCK SELECTOR TO INSTALL BATTERY PACK • Lock switch trigger on this drill by placing the direction of rotation se{ector in center position.
SWITCH LOCK See Figure 4, The switch trigger can be locked in the OFF position. This feature can be used to prevent the possibility of accidental starting when not in use. To lock switch trigger, place the direction of rotation selector (Forward/Reverse Selector) in center position.
INSTALLING BITS See Figure 6, • Lock the switch trigger by placing the direction of rotation selector in center position. See Figure 4. • Open or close chuck jaws to a point where the open- ing is slightly larger than the bit size you intend to use.
BIT STORAGE See Figure 9, When not in use, bits provided with your drill can be placed in the storage area located on the bottom of your drill as shown in Figure 9. SCREWDRIVER BITS BIT STORAGE AREA L Fig. 9 _i WARNING: Always wear safety goggles or safety glasses with side shields when operating tools.
CHUCK REMOVAL See Figures 11, 12, and 13. The chuck must be removed in order to use some acces- sories. To remove: • Lock the switch trigger by placing the direction of rota- tion selector in center position. See Figure 4. • insert a 5/16 in. or larger hex key into the chuck of your drill and tighten the chuck jaws securely.
_ WARNING: When servicing, use only identical Craftsman replacement parts, Use of any other part may create a hazard or cause product damage. Avoid using solvents when cleaning plastic parts. Most plastics are susceptible to damage from various types of commercial solvents and may be damaged by their use.
17.
CRAFTSMAN 3/8in 13;2VOLT CORDLESS DRiLLeD RIVER_ M O DEL NO_3i5iii5200 _ The model number w{{I be found on a plate attached to the motor housing. A{ways mention the model | number {n all correspondence regard{ng your 3/8 in., 13.2 VOLT CORDLESS DRILL-DRIVER or when J ordering repair parts.
C RAFTSMAN 3/8in 15:6VOLT C OR D LESS D R iLL_ D RIVER_ M O D EL NO_3 i5iii52i 0 _ The model number w{{I be found on a plate attached to the motor housing. A{ways mention the model | number {n all correspondence regard{ng your 3/8 in., 15.6 VOLT CORDLESS DRILL-DRIVER or when J ordering repair parts.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Craftsman 315.1152 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Craftsman 315.1152 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Craftsman 315.1152, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Craftsman 315.1152 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Craftsman 315.1152, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Craftsman 315.1152.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Craftsman 315.1152. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Craftsman 315.1152 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
