Manuel d'utilisation / d'entretien du produit 54622D du fabricant Agilent Technologies
Aller à la page of 111
Service Guide Publication Number 5 4622-97037 December 2 002 For S afety Inf ormati on, W arranti es, and Reg ulator y inf orma tion , s ee t he pa ges at t he end of this book . © Copyright Agilent T echnolog ies 2000, 2002 All Righ ts Rese rved Agilent 54621A/22A/24A Oscill oscope and Agilent 54621D/22D Mixed-Signal Oscilloscope service.
ii The Oscilloscope At a Glance Choose from a variety of oscilloscope s for capturing long , non -re peat ing s igna ls with 200 MSa/s sample rate and 2 MBytes of MegaZo om deep memory per channel.
iii In This Book This book provide s the service inform ation for the Agi lent 54 621A/22A/24 A Oscillosco pe and t he Agilen t 54621 D/22D Mix ed-Signal Oscillo scope. This manua l is divi ded in to t hese chapt ers: Chapter 1 provid es ge neral informa tion and s p ecific atio ns.
Contents Contents-1 1 General Inf ormation To insp ect pac kage con tents 1- 3 To i nspect opti ons a nd acces so ries 1- 6 Performance Characteristic s 1-9 2 Prepa ring the O scill oscope for Use Set.
Cont ents Contents-2 4 Calibrating and Adjusting To ad just t he pow er sup ply 4-4 To per form Us er Cal 4-7 To ad just t he os cillosc ope di splay 4-8 5 Troubleshooting Solving Gene ral Problems wi.
1 General Info rmation service.book Page 1 Wednes day, December 18, 2002 8:35 AM.
1- 2 General Information This chapter li sts general i nformation for the Agilent 5462 0-series Oscilloscop es. It also incl udes performance characteristics and specifications for the oscilloscopes.
1- 3 General Informati on To inspect package contents ❏ Inspect th e shippin g contai ner for dam age. If y our shipping con tainer appears to be damag ed, keep the shippin g con tainer or cu shion .
1- 4 General Informati on • Agilent In tuiLink Data Capture (f or 54622A , 22D, or 24A) IntuiLink Dat a Capture is a standal one program for downl oading waveform data from th e os cillos copes t o your PC via GPIB or RS -232 in terf ace.
1- 5 General Informati on Figure 1-1 Package contents for 54620-Series Oscilloscopes s s1 10074C P robes Power cord Access ories p ouch an d fron t-pan el cover ** 5462 0-61801 16-chan nel ca ble* ** .
1- 6 General Informati on To inspect options and accessories ❏ Verify tha t you re ceived the option s and acce ssories you orde red and th at none were d amaged.
1- 7 General Informati on T able 1-2 Accessori es available Model Descrip tion 01650-61607 16:16 logic cable a nd te rminator (for use wit h 54621D /22D) 54620-68 701 16:2 x 8 logic in put prob e asse.
1- 8 General Informati on T able 1-3. Power Cords Plug Type Cable P art Numbe r Plu g Type Cable P art Number Opt 900 (U.K.) 8120-1703 Opt 918 (Japan ) 8120-47 54 Opt 901 (Austral ia) 8120-0696 Opt 919 (Israel) 8120-6799 Opt 902 (Europe ) 8120-1692 Opt 920 (Argenti na) 8120-6871 Opt 903 (U.
1- 9 General Informati on Acquisit ion: Ana log Chan nels Perfo rmance Ch aract e ris tics * Deno tes War rante d Sp ecif ica tions, all othe rs a re typica l. Spe cific atio ns a re v alid afte r a 30-m inute warm -up perio d an d ±10 ° C fr om fi rmware cali bra tion te mper ature .
1- 10 General Informati on V ertical Sy stem: Analog Channe ls Vertic al System : Anal og Chan nels Analo g channel s 54621A/ 21D, 5462 2A/2 2D: Ch1 an d 2 simult aneou s acquisi tio n 54624A: C h 1, 2 , 3, and 4 simu ltan eous acqu isiti on Bandwi dth (-3dB )* 54621A/ 22D: dc t o 60 MHz 54622A/ 22D/24 A: dc to 100 MH z ac coupl ed 54621A/ 21D: 3.
1- 1 1 General Informati on V ertica l S y stem : Ana log Chan nel s (c ont inue d) Vertic al System: Analog Channel s (con tinued) ESD T olera nce ±2 kV Nois e Peak-t o-Pe ak 2% full sc ale or 1 m V, which e ver is gr eater Comm on Mo de Reject ion Rat io 20 dB @ 50 MHz DC Ve rtic al G ain Ac cura cy* 1 ±2.
1- 12 General Informati on Horizo ntal Horizo ntal Rang e 5 ns/ div to 50 s/di v Resolu tion 25 p s Vern ier 1-2-5 increments when off, 25 mi nor i ncrem ents betwee n major se tting s whe n on Refer .
1- 1 3 General Informati on Tr i g g e r S ys t e m Trigge r System Sources: 54621A/ 22A: Ch 1 , 2, line, ext 54621D/ 22D: Ch 1, 2, li ne, ext, D1 5 - D0 54624A: Ch 1, 2, 3, 4, line, ext Modes A uto ,.
1- 14 General Informati on Analog Channe l T rigge ring Analog Channe l Tr iggering Range (Interna l) ±6 div from center sc reen Sen sitiv ity* Grea ter of 0.
1- 1 5 General Informati on Display Sy stem Display System Displa y 7- inc h ras ter m onoch rome CRT Throu ghput of Anal og Chann els 25 million gray scal e vect ors/s ec per channel Resol ution 255 .
1- 16 General Informati on FF T FFT Point s Fixed at 2048 point s Source of FFT Analog ch annels 1 or 2 (or 3 or 4 for 54624A), 1+2, 1-2, 1*2 Window Rect angul ar, Fla tt op, Ha nnin g Nois e Floor -70 to -100 dB depend ing on avera ging Amplit ude D ispl ay In dBV Frequenc y Resoluti on: 0.
1- 1 7 General Informati on General Characteristic s General Charac teristi cs Physica l: Size Weig ht 32.2 6 cm wide x 17.27 cm h igh x 31.75 cm de ep (wi thout handle) 6.35 kgs ( 14 lbs) Cali brato r Output Freque ncy ~1.2 k Hz; A mplitu de ~5 V Trigge r Out 0 to 5 V with 50 Ω source i mpeda nce; del ay ~ 55 ns Printer Power 7.
2 Prep arin g th e Osc illo scope for Use service.book Page 1 Wednes day, December 18, 2002 8:35 AM.
2- 2 Preparing the Oscilloscope for Use To prepare your oscillosco pe for use, you need to do the following tasks. A f t e r y o u h a v e c o m p l e t e d t h e m , y o u w i l l b e r e a d y t o u s e t h e o s c i l l o s c o p e .
2- 3 Setting up the Oscillo scope Aft er you h ave do ne a fe w b asic ta sk s, yo u w il l co nn ect pr ob es to th e oscilloscop e. The number of probes, and the type of probes that you will use depends on the oscilloscope model that you have.
2- 4 Prepa rin g the O scill osc ope f or Use T o adjust the ha ndle To adjust the handle 1 Grasp the ha ndle pivot points on ea ch side o f the instrument and pull the pivo t o ut u nt il it st ops . 2 Without releasi ng t he pivots, swivel the handle to the desired position.
2- 5 Prepa rin g the O scill osc ope f or Use T o p owe r-on the os cill osco pe To power-o n the oscilloscope 1 Connect the power cord to t he rear of the oscilloscope , then to a suitabl e ac voltag e source. The osci llosc ope power supply automa tically adj usts for input line voltages in the range 100 to 240 V AC.
2- 6 Prepa rin g the O scill osc ope f or Use T o adjust the disp lay intensit y To adjust the display intensity The I nte nsity control is at th e low er l eft c orner of the f ront pan el. • To decre ase display intensity, rotate t he Intensit y contr ol counter- clockwise.
2- 7 Prepa rin g the O scill osc ope f or Use T o connect the osc illoscop e probes To connect the oscillosco pe probes 1 Connect t he Agilent 10074C 1.5-mete r, 10:1 osc illoscope probe to the analog channe l 1 or 2 BNC connector input on the oscil loscope, or channel 1 t hrough channe l 4 on th e 54624A.
2- 8 Prepa rin g the O scill osc ope f or Use T o use the d igital pr obes (mixe d-signal oscilloscope only) To use the digital probes (mi xed-signal oscill oscope only) 1 If you feel it’s necessary, turn off the power supply to the circuit under test.
2- 9 Prepa rin g the O scill osc ope f or Use T o use the d igital pr obes (mi xed-signal oscillosco pe only) 3 Connect a grabber to one of the p robe leads. Be sure to co nnect the ground lead. (Other probe leads are omitted from the figure for clarity.
2- 10 Prepa rin g the O scill osc ope f or Use T o use the d igital pr obes (mixe d-signal oscilloscope only) 5 For hi gh-speed signals, connect a ground lead to the probe lead, connect a grabb er to the gr ound lead, and at tach the gra bber to ground in the circuit under te st.
2- 1 1 Prepa rin g the O scill osc ope f or Use T o use the d igital pr obes (mi xed-signal oscillosco pe only) 7 Repeat steps 3 through 6 until you have connected all points of interest.
2- 12 Prepa rin g the O scill osc ope f or Use T o connect a printer To connect a printer The o scill oscope co nne cts t o a pa ralle l pr inter thro ugh the Pa rall el out put connec tor on the rear of the oscil losc ope. Y o u will need a parallel print er cable to connec t t o the p rinter .
2- 1 3 Prepa rin g the O scill osc ope f or Use T o verify basic oscillo scope operation To verify basic osci lloscope ope ration 1 Connect a n oscilloscope pr obe to channel 1. 2 Attach the probe to the Probe Comp output on the lower- right side of the front panel of the oscillos cope.
2- 14 Getting started using t he oscilloscope interface When the oscilloscope i s first turned on, it performs a self -test, then momentarily sho ws a startup screen as shown below. This menu i s only acces sible w hen th e osc illosco pe fi rst sta rts u p.
2- 1 5 Prepa rin g the O scill osc ope f or Use T o verify basic oscillo scope operation •P r e s s t h e Getting Started s oftke y to v iew the sy mbo ls u sed in th e oscill oscope softkey menus. Use th e En try knob labele d to ad just th e par ameter .
2- 16 Using Quick Help The oscilloscope has a Quick Help system that provides use r help for each front-pane l key and softkey on the oscilloscope. T o view Quick Help information : 1P r e s s and hold down t he key for whic h you would like to view help.
2- 1 7 Prepa rin g the O scill osc ope f or Use Sel ect ing a la ngu age for Qu ick Help af ter you hav e been op erat ing th e os cil losc ope Selecting a language for Qui ck He lp a fter you have been operating the oscilloscope 1P r e s s t h e Uti lity key, the n press the Language softkey t o displa y the Language menu.
2- 18 Prepa rin g the O scill osc ope f or Use Loading a lan guage f rom fl oppy disk Loading a language from floppy disk Language files can be d ownloaded from www .agile nt.com/find /5462xsw or call an A gilent cent er an d re quest a languag e dis k for your inst rument .
2- 1 9 Cleaning the oscilloscope 1 Disconnect power from the instrument. CAUTION Avoid Damage to Sensitive Electron ic Component s! Do not use too much liquid in cle aning the oscilloscop e. Water can enter the front-panel k eyboard, cont rol knobs, or floppy disk dam aging sensitive elect ronic com ponent s.
3 Testing Performance service.book Page 1 Wednes day, December 18, 2002 8:35 AM.
3- 2 Testing Performance This chapter explai ns how to verify cor rect oscillosco pe operation and perform tests to ensure that the oscil loscope meets the perfor mance specifications. To completely test and troubleshoot the m ixed-signal oscilloscope, you will create and u se a test connector accessory, as described in this chapter.
3- 3 T es ting Pe rfor man ce List of T e st Equipment List of Test Equipmen t Below is a list of test and equipment and accessories required to perform the performance test ver ification procedures.
3- 4 T est ing Pe rfor manc e T o construct t he test connec tor To construct the test connector The Agi lent 54621D /22D Mixe d-Sign al Oscillos cope has di gital cha nnels that you will nee d to connect to test equipment d urin g test ing.
3- 5 T es ting Pe rfor man ce T o test the 54621D/22D Oscilloscope digital channels To test the 54621D/22 D Oscillosc ope digital c hanne ls The acquisiti on s y stem testi ng provides co nfidence that t he acquisition sy st em is f unction in g cor rec tly .
3- 6 T est ing Pe rfor manc e T o verify digital cha nnel threshold accuracy To verify digi tal channe l threshold accur acy This tes t ver ifies the digita l ch annel thre shold accu racy spe cific atio n of t he Agilent 546 21D/22D Mixed-Si gnal Osci lloscope.
3- 7 T es ting Pe rfor man ce T o verify digita l channel threshold acc uracy 1 Turn on the test equipment and the oscilloscope. Let them warm up for 30 minutes b efore star ting the test. 2 Set up the os cilloscop e calibrator. a Set the oscillo scope calibr ator to provide a DC offs et voltage at the Cha nnel 1 o utpu t.
3- 8 T est ing Pe rfor manc e T o verify digital cha nnel threshold accuracy b Method 2 — Using the Test Fixture Use the Agilen t 01660-6380 1 P erforman ce Verific ation Test Fixture and the Agilen t 0165 0-61607 cable, BNC T ee, and BNC cab le to connec t the di gital channels D0 - D15 to the oscilloscope ca librator.
3- 9 T es ting Pe rfor man ce T o verify digita l channel threshold acc uracy 7 Press the oscillosco pe User softkey, then turn t he Entry knob () o n the front p anel on the oscillosc ope to set the thres hold test s ettings as shown in Table 3-3.
3- 10 T est ing Pe rfor manc e T o verify voltage measuremen t accuracy To verify voltag e measur ement accur acy This test veri fies the vo ltag e measuremen t acc uracy . In thi s test, you wil l measu re th e out put o f a po wer s upply using dual curs ors o n the osci llosc ope, and compar e the results w ith t he m ulti meter r eadin g.
3- 1 1 T es ting Pe rfor man ce T o ver ify voltage measurement a ccuracy b Set the Volts/Div setting to the value in the first line in Table 3-5. T able 3-5 Setti ngs Used to V erify Voltage Measurement Ac curacy c Press the Ac quire key . T hen press the Av e r a g in g softkey and set #Avgs to 64 .
3- 12 T est ing Pe rfor manc e T o verify voltage measuremen t accuracy 3 Use the BNC tee and ca bles to connect the os cilloscope calibr ator /power suppl y to both the oscill oscope and the multimete r . 4 Adju st t he out put so th at th e m ult imet er r ead in g di spl ays the firs t Volts/div s upply set ting value in Table 3-5.
3- 1 3 T es ting Pe rfor man ce T o verify ba ndwidth To verify bandwi dth Th i s te s t v e r i fi e s b an d wi d t h . In t h is t e st y o u w il l u se a n o s c il l o sc o p e c al i b ra t o r with a le vel s inew av e out put.
3- 14 T est ing Pe rfor manc e T o v er ify band wid th 1 Connect the oscilloscope calibrator output through a 50 Ω feedthrough to the osc illoscope c hannel 1 input. 2 Set up the os cilloscop e. a Set the ti me base to 5 00 ns/div. b Set th e Volts/Di v for chan nel 1 to 200 m V/div.
3- 1 5 T es ting Pe rfor man ce T o verify horiz ontal Dt and 1/Dt acc uracy To verify hor izontal ∆ t and 1/ ∆ t accurac y This test v erif ies th e hori zontal ∆ t and 1/ ∆ t accura cy . In t his t est, you w ill use the oscil loscope to measur e the outp ut of a time mark genera tor .
3- 16 T est ing Pe rfor manc e T o ve rif y hor izont al D t and 1/ Dt ac cur acy 4 Change the cal ibrator t o 1- µ s markers . Change the time base to 200 ns/di v. Adjust the trigger level t o obtain a st able displ ay. 5 Measure the f ollowing: Frequency 1 MH z — The tes t limits are 997.
3- 1 7 T es ting Pe rfor man ce T o verify trigger sensiti vity To verify trig ger sensitivi ty T h i s t e s t v e r i f i e s t h e t r i g g e r s e n s i t i v i t y. I n t h i s t e s t , y o u w i l l a p p l y 2 5 M H z t o t h e osci llos cope .
3- 18 T est ing Pe rfor manc e T o verify trigger sensitivi ty Test In te rna l T ri gger Se ns itiv ity 1 Press the Save/R ecall key, t hen press the Default Setu p s oft k ey. 2 Connect the c alibrator to channel 1 using a 50 Ω fee dthrough at t he oscill oscope inpu t.
3- 1 9 T es ting Pe rfor man ce T o verify trigger sensiti vity Test External Tr igger Se nsitivity V erify t he ext erna l trigg er sensiti vity at these settin gs: 100 MHz (54622 A/22D/ 24A), <15.
3- 20 Agilent 54622A/ 22D/24A Performa nce Test Record Agilent 54 622A/ 54622D/5 4624A Seri al No. _____ _______ ____ _____ ____ _____ ____ ____ Test by ___ _____ ____ _____ ____ _____ ___ Tes t Inte rval ___ ____ _____ ____ _____ ____ ____ _____ __ Work O rder No.
3- 2 1 Agilent 54621A/ 21D Performance Test Record Agilent 54 621A/546 21D Seri al No. _____ _______ ____ _____ ____ _____ ____ ____ Test by ___ _____ ____ _____ ____ _____ ___ Tes t Inte rval ___ ____ _____ ____ _____ ____ ____ _____ __ Work O rder No.
4 Calibrating an d Adjustin g service.book Page 1 Wednes day, December 18, 2002 8:35 AM.
4- 2 Calibrating and Adjusting This chapter explai ns how to adjust the o scilloscope fo r optimum operating performance . You shoul d perform the har dware a djustments and self-calibration accordi ng to the following recommendations. • Perform hardware adjustments every 12 m onths or after 2,000 hours of ope ration .
4- 3 Calibr atin g and Adju sting WARNING HAZARDOUS VOLTAGES ! Read the sa fety summar y at the ba ck of thi s book b efore p roceedi ng. Maintenanc e is performe d with power sup plied to the o scilloscope a nd with the prot ectiv e cover s remov ed.
4- 4 Calib rating an d Adjusting T o adjust the po wer supply To adjust the power supply The o scil loscop e po wer supp ly h as bo th a +3.3 V ad justm ent, and a +5.1 V / -5.2 V balance a dj ustmen t. Othe r osc illo scope voltages a re b ased on the + 3.
4- 5 Calibr atin g and Adju sting T o adju st the po wer suppl y 2 Locate the power supply voltages at E204, E205, E207, and E 208 on the system board . The p ower suppl y vol tages are n ot la bele d on the sy stem board. See Figure 4-1 for t he loc atio ns.
4- 6 Calib rating an d Adjusting T o adjust the po wer supply 4 If the +5. 1 V measurement i s out of tol erance, adjus t the +5.1 V / -5.2 V bal ance adjustment on the power supply. See Figure 4-2. 5 If the -5.2 V m easurement is out of tolerance , adjust the +5.
4- 7 Calibr atin g and Adju sting T o perfor m User C al To perform User Cal Perfo rm se lf-cal ibrati on: • eve ry 6 mon ths o r af ter 1000 hou rs of op erati on. • if the ambien t temp eratu re is >10 °C fro m the calib ratio n temp eratur e.
4- 8 Calib rating an d Adjusting T o adjust the osc illos cope display To adjust the oscilloscope displ ay In th is proc edure, yo u wil l m ake ad justm ents usi ng t wo dis play patte rns.
4- 9 Calibr atin g and Adju sting T o adjust the o scilloscop e display 5 Adjust H.H OLD (horizontal hold) to c enter the display horiz ontally. 6 Adjust FOCUS to achieve t he best focus. 7 Adjust V. L I N (vertical l inearity) to posi tion all f our corne rs of the hal f- bright bor ders equall y.
5 Troublesh ooting service.book Page 1 Wednes day, December 18, 2002 8:35 AM.
5- 2 Troubles hooting This chapter begins with sug gestions for sol ving general problems that you may encounter with the oscilloscope. It tells you what to do in these cases: • If there is no trace.
5- 3 Solving General Problems wit h the Oscilloscopes This section de scribes how to sol ve general problems t hat you may encounter while using the 546 21A/22A/24 A Oscilloscopes and the 5462 1D/2 2D Mixe d-Si gna l O scill osco pes to make me asure me nts .
5- 4 T rou ble sho otin g If the trace display is unusual or unexpected If t he trace displ ay is unusual or un e xpected ❏ Check tha t the Horizont al time/div ision setting is correc t for the expec ted frequency range of t he input sig nals. ❏ The sampling spee d of the oscilloscope depends on the time/di vision setting.
5- 5 T roublesho oting If yo u c ann ot s ee a cha nne l If you cannot see a channel ❏ Check that the oscilloscope p robe cable is sec urely conne cted to the input connec tor.
5- 6 Troubleshooting the Oscill oscope The service p olicy for the 54621A/22A/2 4A Oscilloscopes and the 5462 1D/2 2D Mix ed -Sig nal O scil losc op es i s inst rum ent r epla cem en t.
5- 7 T roublesho oting T o c ons truc t you r ow n dumm y lo ad To construct your own dummy load 1 Obtain a connector that is compatible with the connector J3 on the Low Voltage Power Supply.
5- 8 T rou ble sho otin g T o check out the osc illoscope To check out the osci lloscope 1 I s an interfa ce module connected to the rear panel of the oscilloscope? If the an swer is yes, fol low these ste ps. Otherwise, go to step 2. a Turn off the osc illoscope.
5- 9 T roublesho oting T o check out the oscillos cope 5 Disconnect the display ribbon cable from the system board. Then check the signals on the system board listed in Table 5-2. T able 5-2 Display Signals on the System Bo ard – All Oscillo scopes If t he sig nals are goo d, rep lace the d ispla y ass embly .
5- 10 T rou ble sho otin g T o check out the osc illoscope 8 Is the fan ru nning? The low v olta ge p ower supp ly ha s a ther ma l cut-o ut circ uit. If th e fa n i s defectiv e, the low voltage power supply wi ll shut do wn when it gets too hot f or safe operat ion.
5- 1 1 T roublesho oting T o check the Low V oltage Powe r Supply To check the Low Voltage Power Supply 1 Disconnect the power cord from the oscillos cope.
5- 12 T rou ble sho otin g T o check the Low V oltage Power Supp l y T able 5-4 Low Volta ge Power Su pply Tole rances 4 If the +5. 1 V measurement i s out of tol erance, adjus t the +5.1 V adjustment on the power suppl y. 5 If the -5.2 V m easurement is out of tolerance , adjust the -5.
5- 1 3 T roublesho oting T o run the in ternal self- tests To run the internal self-t ests Self T est perf orms a s erie s of int ernal pr ocedures to verif y t hat the os cill oscope and any attached modul e are operating pro perly .
6 Replacing Assemblies service.book Page 1 Wednes day, December 18, 2002 8:35 AM.
6- 2 Replacing Assemblies This chapter describes how to remove assemblies from the oscilloscope. After you have removed an assembly, to install the r eplacement assembly, fol low the instructions in re verse order.
6- 3 Replaci ng Assemblies WARNING HAZARDOUS VOLTAGES ! Read the sa fety summar y at the ba ck of thi s book b efore p roceedi ng. Maintenanc e is performe d with power sup plied to the o scilloscope a nd with the prot ectiv e cover s remov ed.
6- 4 Repla cing Asse mb lies T o remove t he cabi net To remove the cabine t 1 Turn off t he oscillo scope and discon nect the power c able. 2 Rotate the handle up as sh own below. 3 If a module is installed, re move it from th e oscillos cope. 4 Using the T20 TORX driver, remove the two screws from the rear of the cabinet.
6- 5 Replaci ng Assemblies To r e m o v e t h e f a n To remove the fan 1 Disconnect the fan cabl e from the power s upply boar d. 2 Using t he T2 0 TORX driver, remove the three s crews that hold t he f an to the deck. Figure 6-2 Remo ving the fan service.
6- 6 Repla cing Asse mb lies T o remove the floppy drive To remove the floppy drive 1 Using the T8 TORX driver, loosen the two screws that hold the drive to the deck . 2 Lift th e drive away f rom the sys tem board. 3 Disconnect the ribbon cable from the connector on the rear of the drive.
6- 7 Replaci ng Assemblies T o rem ov e th e fro nt pa nel To remove the front pa nel 1 Remove the int ensity knob a nd shaft by gr asping the kno b with one hand and the gr asping the s haft behind the front panel with the o ther hand and pull ing the shaft str aight out from the fr ont panel .
6- 8 Repla cing Asse mb lies T o remove the d isplay To remove the dis play 1 Remove the fr ont panel from the o scillosco pe. 2 Disconnect t he ribbon cabl e from the di splay board. 3 Using the T20 TORX driver, remove the four screws that hold the display to the deck.
6- 9 Replaci ng Assemblies T o remo ve t he di spl ay 4 Use a flat -blade screwdriver to gently unh ook the la tch that holds the white power- actuator sha f t to the po wer switch, the n disconnect the shaft from the power switch. After you disconnect the shaft, make sure you positi on it in the re cess along t he side of t he display br acket.
6- 10 Repla cing Asse mb lies T o remove the sy stem board To remove the system board 1 Remove the fl oppy drive. 2 Using the T10 TORX driver, remove the six screws that hold the system board to th e deck. 3 Remove the two hex nuts and washers from the rear BNCs using the 9/16-i nch socket dri ver.
6- 1 1 Replaci ng Assemblies T o remove the sy stem board 7 Lift the back of the board to clear the main deck and then pull the board straigh t out. Figure 6-8 Remo ving the syste m board service.
6- 12 Repla cing Asse mb lies T o remove th e powe r supply To remove the power supply 1 Remove the fan . 2 Disconnect t he ground wire (green wi re with the y ellow stri pe) from the deck . 3 Disconnect t he ribbon cabl e from the power supply board.
6- 1 3 Replaci ng Assemblies T o remo ve t he p owe r sup ply 5 Use a flat -blade screwdriver to gently unh ook the la tch that holds the white power- actuator sha f t to the po wer switch, the n disconnect the shaft from the power switch.
6- 14 Repla cing Asse mb lies T o remove th e powe r supply 6 Using the T20 TORX driver, remove the screw holding the power supply board to th e deck. Figure 6-11 Remo ving the power supp ly 7 Slide the power supply board toward the front panel about 1/2 inch.
6- 1 5 Replaci ng Assemblies T o re mo ve th e keyb oar d asse mb ly To remove the keyboard a ssembl y 1 Remove the fr ont panel. 2 Remove all of the knobs by pul ling them st raight out. 3 Using the T10 TORX driver, remove the four screws from the keyboard shie ld.
6- 16 Repla cing Asse mb lies T o remove t he hand le To remove the han dle • Rotate the handle downwar d until it just p asses th e last det ente position ; this is about 1/2 inch before the handle touches the bottom of the oscil loscope. • Pull the sides of the handl e out of the cabinet.
7 Replaceable Parts service.book Page 1 Wednes day, December 18, 2002 8:35 AM.
7- 2 Replaceable Parts This chapter descr ibes how to ord er replaceable assemblies and parts for the Agilent 5462 1A/22 A/24A Oscil loscope an d Agil ent 54621D/2 2D Mixed-Si gnal Oscilloscope. Diagrams and parts lists are included for assemblies and hardware that you can ord er.
7- 3 Replace able Part s T o order a rep lac emen t pa rt To order a repla cement part • To order a part i n the material list, quote t he Agilent Technologie s pa rt number, indic ate the quantity des ired, and addr ess the order to your nearest Agil ent Technologies Sales Office.
7- 4 Replac eable Parts T o o rde r a re plac emen t par t Figure 7-1 Explod ed V iew o f the 54621 A/2 2A/24A /21D/ 22D Osc illo scope service.book Page 4 Wednes day, December 18, 2002 8:35 AM.
7- 5 Replace able Part s T o order a rep lac emen t pa rt T able 7-1 Repl aceab le Pa rts Refer ence Designat or Agilent Part Number Qty Descr iption A1 5 4621-6900 1 1 Refur bished P roduct 2 CH 60M .
7- 6 Replac eable Parts T o o rde r a re plac emen t par t MP1 54801-4740 1 Se e Descr Knob - 12mm Fl int Gra y (54621A/2 2A – 6 ea) (54621D/2 2D/24A – 8 ea) MP2 5 4801-4740 2 See Desc r Knob - 18.
7- 7 Replace able Part s T o order a rep lac emen t pa rt MP25 54622-6340 3 Se e Descr Attenua tor lid (54621A/ 21D/22A/22D - 1 each) (54624A - 2 each ) W1 54630 -61601 1 Disp lay rib bon cabl e W2 54.
DECLARA TION OF CONFORMITY Accord ing to ISO/ IEC Guid e 22 and C EN/CENELEC EN 45014 Manufa ctur er’ s Name: Manu factur er ’ s Addre ss: Agil ent Tech nolo gies, Inc.
Produc t Regul ations EMC IEC 6132 6-1:1997 +A1:1998 / EN 61326-1:199 7+A1:19 98 CISPR 11:19 90 / EN 55011:19 91 IEC 61000 -4-2:1995 +A1:199 8 / EN 61000-4-2 :1995 IEC 61000 -4-3:1995 / EN 61000-4-3 :.
Agilent T echn ologies Inc. P .O. B ox 21 97 1900 Gard en of the Gods R oad Colo rado Spr ings, CO 80901-21 97, U. S.A. Safety Notices This apparat us has bee n designed and tested i n accor- dance with IEC Public ation 1010, Safe ty Requ ire ments f or M ea- suring A pparatus , and has be en supplied in a safe condition.
Notices © Agilent Technologies, Inc. 2000- 2002 No part of thi s manual may be reprodu ced in any form o r by any mea ns (includ ing elec tronic storage an d retriev al or trans la- tion in to a f oreign languag e) without pri or agreem ent and written consent fr om Ag ilent Technolo gies, Inc .
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Agilent Technologies 54622D c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Agilent Technologies 54622D - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Agilent Technologies 54622D, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Agilent Technologies 54622D va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Agilent Technologies 54622D, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Agilent Technologies 54622D.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Agilent Technologies 54622D. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Agilent Technologies 54622D ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
