Manuel d'utilisation / d'entretien du produit 380 du fabricant Compaq
Aller à la page of 34
INTELLISTRIPE 380 USB/RS-232 DESKTOP MOTORIZED READER-ENCODER TECHNICAL REFERENCE MANUAL Manual Part Number 99875275-3 AUGUST 2007 REGISTERED TO ISO 9001:2000 1710 Apollo Court Seal Beach, CA 90740 Phone: (562) 546-6400 FAX: (562) 546-6301 Technical Support: (651) 415-6800 www.
ii Copyright © 2001-2007 MagTek ® , Inc. Printed in the United States of America Information in this document is subject to change without notice. No pa rt of this document m ay be reproduced or transmitted in any form or by any m eans, electronic or mechanical, for any purpose, without the express wri tten permission of MagTek, Inc.
iii REGISTERED TO ISO 9001:2000 MagTek Part Number 9987 5275 -1 1710 Apollo Court, Seal Beach, CA 90740 25 February 2003 Voice: 562-546-6400 Fax: 562-546 -6301 SOFTWARE LICENSE AGREEMENT IMPORTANT: YOU SHOULD CAREFULLY READ ALL THE TERMS, CONDITIONS AND RESTRICTI ONS OF THIS LICENSE AGREEMENT BEFORE INSTALLING THE SOFTWARE PACKAGE .
iv FCC WARNING STATEM ENT This equipment has been tested and found to comply with the lim its for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designe d to provide reasonable protection against harmful interference when the equipment is operated in a co mmercial environment.
v 1 1 1 2 2 2 2 2 4 4 4 4 5 5 5 6 6 6 6 6 6 7 7 7 7 7 8 8 8 8 8 8 8 8 9 9 9 9 9 9 10 11 11 11 11 11 TABLE OF CONTENTS SECTION 1. FEATURES AND SPECIFI CATIONS..................................................................................... CONFIGURA TIONS .
vi 11 11 12 19 19 19 19 19 21 21 21 21 21 21 Flange ......................................................................................................................... ........................ MagTek Moun ting Plate..............................
vii viii 1 0 12 12 13 14 14 15 15 16 16 17 1 9 20 20 22 23 24 25 1 0 14 15 16 TABLE OF FIGURES Figure 1-1. IntelliStri pe 380------------------------------------------------------------------------------------------------- -- Table 1.
viii Figure 1-1. IntelliStripe 380.
1 SECTION 1. FEATURES AND SPECIFICATIONS The IntelliStripe ® 380, Desktop Motorized Reader-Encode r reads and encode s m agnetic-stripe cards and smartcards.
IntelliStripe 380 2 APPLICABLE DOCUMENTS Standards ISO 7811-2, -3, -4, -5 Identification cards tracks 1-3 ISO 7810 Physical specifications ISO 7816 Smartcard specifications EMV 1996 Europay-Mastercard.
Section 1. Features and Specifications 3 Motorized Card Transport The Card Transport is based on an existing MagTek magstripe/encode m odule. This module incorporates the following features: Lead-in R.
IntelliStripe 380 4 Spring-Loaded Card Registration Guide(s) The spring-loaded guide ensures that the reference edge of the card is mech anically referenced to the magnetic read/write head, so that the magneti cally encoded track data is physically located on the magstripe in accordance with the specifications of ISO 7811.
Section 1. Features and Specifications 5 Direction of Magnetic Read: The ISO 7810 and 7811 specifications allow for bidirectional magnetic reading of the card.
IntelliStripe 380 6 Cable Management The following provisions are made for communication and power lines: • Polarization and locking of cable connectors • Strain relief of cables • Wire routing functionality • RJ series connectors for main a nd auxiliary RS-232 interfaces.
Section 1. Features and Specifications 7 RAM Space: 40 K bytes ROM Space: ROM Flash: Main Program Memory: 512 K Bytes Boot Loader Memory: 24 K Bytes Configuration Memory: 8 K Bytes Host Serial Port The RS-232 Host Serial Port provides serial communications between the Reader/Encoder and the Host Computer.
IntelliStripe 380 8 Opto-Sensor Inputs The Main PCB provides inputs for the three opto-sensors (Front, Encode, and Rear). Rotary Pulse Generator The Main PCB provides input for the MagTek 75/210 bpi Rotary Pulse Generator (RPG).
Section 1. Features and Specifications 9 External Auto-Ranging Power Pack The Reader/Encoder is powered from an external power-pack, which is located near the Host Computer System.
IntelliStripe 380 10 SPECIFICATIONS The Specifications are listed in Table 1-1. Table 1.1. Specifications OPERATING MSR Read-data Format Specifications Supported Mag-Stripe: ANSI/ISO 7810, 7811/AA MVA.
11 SECTION 2. INSTALLATION The installation of the IntelliStripe 380 Reader-Encoder cons ists of m ounting the unit on a flat surface, connecting the I/O RS-232 cable to the host serial port, th e Auxiliary cable to a peripheral device, and the Power Supply to the I/O cable and to a wall receptacle.
IntelliStripe 380 12 Foot P ads (4) Mounting Screws #4-40 (3) 5.789 3.230 1.616 1.105 .546 Figure 2-1. Dimensions for Mounting Holes for 3-Screw Set and Foot Pads Lock-In-Place Slots (4) Ø .125 Mounting Flange (1) (use with Lock-In-Place mounting holes) 4.
Section 2. Installation 13 . Card Ejector Rod Mounting Flange Card Ejector Rod Rear P anel Guide Slots & Attachment Holes Figure 2-3. Rear Panel and Cover Connect the Host PC cable (P/N 16051417) to th e RS-232 connector on th e IntelliStripe 380 as shown in Figure 2-4 for the RS-232 connection.
IntelliStripe 380 14 Cable P/N 16051417 T o PC P ow er Supply (with cable) P/N 64300091 Nor th American 110V P ow er Cord P/N 71100001 Figure 2-4. Cable Connections - RS-232 Table 2-1 lists the pins for the host cable P/N 16051417. Table 2-1. Pin List for IntelliStripe 380 to Host PC Cable P/N 16051417 10P10C RJ Plug 2.
Section 2. Installation 15 Cable connections for the USB are Shown in Figur e 2-5, and the pin lists are shown in Table 2-2 and Table 2-3. IntelliStripe 380 Back P anel P1 P4 P2 P3 Pin 4 Pin 1 Pin 1 Pin 5 Pin 1 Pin 10 P ow er Supply (with cable) P/N 64300091 Cable P/N 16051422 Nor th American 110V P ow er Cord P/N 71100001 Figure 2-5.
IntelliStripe 380 16 Table 2-3. Cable Connections – USB Power P3 – 2.5 mm Power Jack Wire Color P4 – 10P10C RJ Plug Shell Gnd Drain Wire 1 PWR GND Center Pin +12 26AWG Wire (Black) 2 +12 Shell G.
Section 2. Installation 17 Ejector Rod Hole For Card Remo val P ow er And USB Cable P/N 16051422 Rear P anel Cov er Figure 2-7. Rear Panel Cover Replaced – USB Connection Plug in the power supply into a wall receptacle.
IntelliStripe 380 18.
SECTION 3. OPERATION AND MAINTENANCE The operation of the unit includes inserting and removing the card. Maintenance includes keeping the unit clean and removing jammed cards from the unit. OPERATION The card is inserted with the magnetic stripe down and to the right as illu strated in Figure 3-1.
IntelliStripe 380 Shut power off by unplugging the power supply (Fi gure 2-4), and remove the card with the Rod as follows: 1. Remove the Rear Panel Cover to access th e E jector Rod as indicated in Figure 3-2. Rear P anel Cov er Ejector Rod Hole For Card Remo val Rear P anel Card Ejector Rod Figure 3-2.
21 APPENDIX A. DIMENSIONS FOR MOUNTING MOUNTING The bottom of the unit is shown in Figure 2-1 and 2-2. The IntelliStripe 380 may be mounted in one of three ways: 1) foot pads, 2) set of mount ing holes for 3 screws (4 x 40), and 3) 4 lock-in- place slots.
IntelliStripe 380 Figure A-1. Mounting Dimensions 1 22.
Appendix A. Dimensions for Mounting 23 Figure A-2. Mounting Dimensions 2.
IntelliStripe 380 24 Figure A-3. MagTek Mo unting Plate, I380, 1.
Appendix A. Dimensions for Mounting 25 Figure A-4. MagTek Mo unting Plate, I380, 2.
Appendix A. Dimensions for Mounting 26.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Compaq 380 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Compaq 380 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Compaq 380, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Compaq 380 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Compaq 380, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Compaq 380.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Compaq 380. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Compaq 380 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
