Manuel d'utilisation / d'entretien du produit VS738 du fabricant Clarion
Aller à la page of 24
VS738 DIGIT AL MEDIA PLA YER OWNER’S MANUAL INST ALLA TION GUIDE BEDIENUNGSHANDBUCH INST ALLA TIONSANLEITUNG MODE D’EMPLOI GUIDE D’INST ALLA TION MANUALE DELL ’UTENTE GUIDA PER L ’INST ALLAZ.
1 ENGLISH Features • Features Compatible with P AL DVD (Video CD) and NTSC DVD (Video CD) This player can play discs recorded in either P AL or NTSC format. - A single LSI chip now integrates all major DVD playback circuit functions including the MPEG2 decoder , video D/A converter , and audio decoders.
2 Contents Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Disc Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 ENGLISH Safety Information • Caution - THIS MOBILE DVD PLA YER IS A CLASS I LASER PRODUCT . HOWEVER THIS MOBILE DVD PLA YER USES A VISIBLE/ INVISIBLE LASER BEAM WHICH CAN CAUSE HAZARDOUS RADIA TION EXPOSURE IF DIRECTED. - BE SURE T O OPERA TE THE MOBILE DVD PLA YER CORRECTL Y AS INSTRUCTED.
4 Disc Notes • Disc Formats Supported by This Player DVD 12 cm disc/8 cm disc (Single-sided disc only) Video CD 12 cm disc/8 cm disc CD/CD-R/RW , MP3 12 cm disc/8 cm disc • Discs Which Cannot Be P.
5 ENGLISH Disc Notes • Preparing New Discs with Rough Spots A new disc may have rough edges on its inside and outside edges. If a disc with rough edges is used, the proper setting will not be performed and the player will not play the disc. Therefore, remove the rough edges in advance by using a ball-point pen or pencil as shown below .
6 Installation • Notes: - Choose the mounting location where the unit will not interfere with the normal driving function of the driver . - Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly .
7 ENGLISH Installation Removing the unit 1. Frame 2. Insert fingers into the groove in the front of frame and pull out to remove the frame. (When re-attaching the frame, point the side with the groove downwards and attach it.
8 Installation - Installation Bracket-mount (Method C) If installation of the DVD player in a DIN slot is impossible or undesirable, it can be installed in alternative installation locations using the supplied mounting brackets.
9 ENGLISH Using the Detachable Front Panel • T o Detach the Front Panel 1. Press the OPEN button, then the front panel will be folded down. 2. Remove the front panel by pulling its middle-hand side outward. 3. For safekeeping, store the front panel in the supplied protective case immediately after being removed.
10 Electric Connection DVD MAIN UNIT (VIEW FROM REAR) OUT IN SPDF DIGIT AL OUT IR WHITE WHITE RED RED YELLOW YELLOW YELLOW RED BLACK TO POWER SUPPL Y AUDIO-L AUDIO-L AUDIO-R AUDIO-R VIDEO VIDEO A V -O.
11 ENGLISH Remote Control 1. POWER Button for switching the equipment ON or OFF . 2. 0-9 Numerical buttons. 3. ILL/GOTO Button for adjusting the brightness of the VFD Display , or performing time search during play . 4. 7 Press to stop playback. 5. 1 / ¡ Fast forward ¡ and fast reverse 1 buttons.
12 Preparing the Remote Control Unit for Use • Inserting the Batteries 1. Open the battery compartment cover . 2. Insert the new batteries. Make sure that the positive and negative poles of the battery are positioned as show inside the battery compartment.
13 ENGLISH Basic Operation • Stop Play - Briefly press the 7 STOP button to stop playback, and press the PLA Y button to continue normal play . - Press the 7 STOP button twice. The player will stop and return to the first section or chapter . • Fast Forward/Fast Reverse - Press ¡ FF or 1 REW during play .
14 Basic Operation - Use the 0-9 keys to input the TITLE/ CHAPTER, or hh:mm:ss to which you want to jump. Use 1 or ¡ to select TITLE/CHAPTER/TIME input. Use ENTER to execute jumping. - CD/VCD: Press ILL once to display: GOTO --:-- - Use the 0-9 keys to input the mm:ss from where you want to start playback.
15 ENGLISH Basic Operation 5. Press DISPLA Y for the fifth time. The message on the screen will be cleared. - VCD (with PBC Off)/CD Each time the DISPLA Y button is pressed, the screen display changes in the following order: • Multiple Language Audio Function for DVD - Press the AUDIO button during play .
16 MP3 Disc Replay • Supported CD-R/R W Standards: - Disk at once - T rack at once • Supported File Formats: - ISO9660, level 1 and level 2 - Joliet - Romeo • File System: - Max. 8 levels of folders - 31 files in each folder - Max. 255 folders - Max.
17 ENGLISH Initial Setup • Initial Setup SETUP – MAIN P AGE • General Setup SETUP – GENERAL – TV DISPLA Y Press SETUP in the stop mode. (Press the 7 STOP button twice to ensure the player is in the stop mode.) 1. The initial SETUP MENU is displayed.
18 General Setup SETUP – GENERAL – TV TYPE • TV T ype Setup - This player can play discs recorded in either P AL or NTSC format. - Select the NTSC format, when an to NTSC TV is connected. - Select P AL format, when a P AL TV is connected. - With MUL TI format, the TV output format will automatically change according to the DVD disc format.
19 ENGLISH Speaker Setup SETUP – GENERAL – CAPTIONS • Captions Setup Activate the CAPTIONS feature by selecting ON. Release this feature by selecting OFF . • Speaker Setup SETUP – SPEAKER – DOWNMIX • DOWNMIX Setup This is to switch the audio output from DOLBY AC3 5.
20 Preferences Setup SETUP – AUDIO – DUAL MONO • Dual Mono The Dual mono reproduction only process for Dolby Digital program with 1+1 Audio code mode. STEREO: Reproduces 1+1 program CH1 for left channel, CH2 for right channel. CH1 MONO: Reproduces CH1 channel in both Left/Right output.
21 ENGLISH Preferences Setup SETUP – PREFERENCES – SUBTITLE • Subtitle Language Setup Select the preferred SUBTITLE language by using the cursor buttons. SETUP – PREFERENCES – DISC MENU • Disc Menu Language Setup Select the preferred DISC MENU language by using the cursor buttons.
22 Preferences Setup SETUP – PREFERENCES – P ASSWORD SETUP – PREFERENCES – DEF AUL TS • Factory Settings (Reset) Select RESET to return the unit to the factory settings.
23 ENGLISH Specifications Supply voltage: 12 V DC (1 1 V - 16 V), nominal voltage 12 V , negative ground Current consumption: Less than 2.0 A Signal system: Composite video 1.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Clarion VS738 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Clarion VS738 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Clarion VS738, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Clarion VS738 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Clarion VS738, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Clarion VS738.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Clarion VS738. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Clarion VS738 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
