Manuel d'utilisation / d'entretien du produit 78-16019-02 du fabricant Cisco Systems
Aller à la page of 32
CHAPTER 3-1 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 3 Initial Configuration This chapter describes how to conf igure the Cisco ONS 15530 so it can be accessed by other devices.
3-2 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Starting Up the Cisco ONS 15530 The CPU switch module provides a slot on the front panel that accommodates a CompactFlash card.
3-3 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About Passwords Modem Support The auxiliary port of the Cisco ONS 15530 provides modem connection support. The follo wing settings on the modem are required: • Enable auto answer mode.
3-4 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring IP Access on the NME Interface Configuring IP Acces.
3-5 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring IP Access on the NME Interface The Cisco ONS 15530 NME interface should no w be operating correctly .
3-6 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring the Host Name Example Switch# show interfaces fastethernet 0 FastEthernet0 is up, line protocol is up Hardware is AmdFE, address is 0000.
3-7 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About NTP Note The host name is also synchronized with the standby CPU switch module. The host name prompt on the standby CPU switch module appears with “sby-” as a pref ix.
3-8 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring NTP implementation allows a machine to be conf igured so that it acts as though it is synchronized using NTP , when in fact it has determined the time using other means.
3-9 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features Configuring Security Features The.
3-10 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features method you hav e implemented) in the form of accounting records. Each accounting record contains accounting attribute-v alue (A V) pairs and is stored on the security serv er .
3-11 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Security Features Configuring TACACS+ T o conf igure your router to support T A CACS+, perform the follo wing tasks: Step 1 Use the aaa new-model global conf iguration command to enable AAA.
3-12 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About CPU Switch Module Redundancy Refer to the “Conf iguring Passwords and Pri vileges” part in the Cisco IOS Security Conf iguration Guide .
3-13 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About CPU Switch Module Redundancy Figure 3-1 shows the v alid hardware transition states for a system with redundant CPU switch modules.
3-14 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About CPU Switch Module Redundancy Redundant Operation Requirements For fully redundant operation, the follo wing requirements must be met: • T wo CPU switch modules are required.
3-15 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy • The acti ve CPU switch module f ails.
3-16 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Forcing a Switchover from ROM Monitor Mode Y ou can manually force the standby CPU switch module to take ov er as the active CPU switch module R OM monitor mode.
3-17 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Configuring Autoboot .
3-18 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Example The follo win.
3-19 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Example The following.
3-20 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Configuring Maintenance Mode Y ou can conf igure the Cisco ONS 15530 to enter the redundancy maintenance mode.
3-21 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Examples The followin.
3-22 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy The follo wing exampl.
3-23 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy deviation_numbers_str.
3-24 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring CPU Switch Module Redundancy Configuring Privilege.
3-25 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register Example The followin.
3-26 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register • Enable booting from a TFTP server • Recov er a lost password • Boot the system manually using the boot command at the bootstrap program prompt.
3-27 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register Bit 12 and bit 11 in the conf iguration register determine the data transmission rate of the console terminal.
3-28 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About the Software Configuration Register T able 3-7 describes the v alues for the boot f ield.
3-29 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Changing the Software Configuration Register Changing the Soft.
3-30 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration About Fan Failure Shutdown About Fan Failure Shutdown The Cisco ONS 15530 fan assembly is located at the bottom of the chassis and contains six indi vidual fans and a fan controller board.
3-31 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Fan Failure Shutdown Displaying the Fan Tray Failu.
3-32 Cisco ONS 15530 Configuration Guide and Command Reference 78-16019-02, Cisco IOS Release 12.2(18)SV2 Chapter 3 Initial Configuration Configuring Fan Failure Shutdown.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Cisco Systems 78-16019-02 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Cisco Systems 78-16019-02 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Cisco Systems 78-16019-02, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Cisco Systems 78-16019-02 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Cisco Systems 78-16019-02, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Cisco Systems 78-16019-02.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Cisco Systems 78-16019-02. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Cisco Systems 78-16019-02 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
