Manuel d'utilisation / d'entretien du produit 12.4(25d)JA du fabricant Cisco Systems
Aller à la page of 540
Cisco Systems, Inc. www.cisco.com Cisco has more than 200 offices worldwide. Addresses, phone numbers, and fax numbers are listed on the Cisco we bsite at www.cisco.com/go/ offices. Cisco IOS S of tw are Conf iguration Guide f or Cisco Air o net A ccess P oints Cisco IOS Releases 15.
THE SPECIFICATION S AND INFORMAT ION REGARDING THE PRODUCTS IN THIS MA NUAL ARE SUBJ ECT TO CHANGE WITHOUT NOT ICE. ALL STATEMENTS , INFORMATION , AND RECOMMEN DATIONS I N THIS MANUA L ARE BELIEVE D TO BE ACCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED.
Contents 1 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Audience i-xix Purpose i-xix Organization i-xx Conventi ons i-xxi Related Publication s i-xxii Obtaining .
Contents 2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Getting Help 3-3 Abbreviating Command s 3-3 Using the no and Default Forms of Commands 3-4 Understanding.
Contents 3 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Using the Express Security Page 4-20 CLI Conf iguratio n Exampl es 4-21 Configuring System Power Settings Access Points 4-26 Using the AC Power Adapter 4-26 Using a Switch Capable of IEEE 802.
Contents 4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Configuring Spectrum Expert Mode 5-10 Controlling Access Point Acce ss with RADIUS 5-11 Default RADIUS C.
Contents 5 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Defining HTTP Access 5-35 Configuring a System Name and Prompt 5-35 Default System Name and Prompt Config.
Contents 6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Confirming th at DFS is Enabled 6-20 Configuring a Channel 6-20 Blocking Chann els from DFS Selection 6-21 Setting the 802.
Contents 7 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Default SSID Configuration 7-4 Creating an SSID Globally 7-4 Viewing SSIDs Configured Globally 7-6 Using .
Contents 8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Non-Root Bridge with VLANs 8-13 Displaying Spannin g-Tree Status 8-14 CHAPTER 9 Configuring an Acc ess P.
Contents 9 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Software and Firmware Requirements for WPA, CCKM, CKIP, and WPA-TKIP 11-8 Configuring Authentication Type.
Contents 10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 CLI Configuration Example 12-24 Support for 802.11r 12-24 Configuring Management Frame Protec tion 12-2.
Contents 11 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Understanding T ACACS+ 13-23 TACACS+ Operation 13-24 Configuring TACACS+ 13-24 Default TAC ACS+ Config u.
Contents 12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Rate Limiting 15-11 Adjusting Radio Access Categories 15-12 Configuring Nominal Rates 15-13 Optimized V.
Contents 13 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 SNMP Community Strings 18-4 Using SNMP to Access MIB Variables 18-4 Configuring SNMP 18-5 Default SNMP C.
Contents 14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Guidelines for Using Workgroup Bridges in a Lightweig ht Environment 19-20 Sample Workgroup Bridge Conf.
Contents 15 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Copying Image Files by Using TFTP 20-19 Preparing to Download or Upload an Image File by Using TFTP 20-1.
Contents 16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Indicators on 1260 Series Access Points 22-15 Indicators on 1300 Outdoor Acces s Point/Bridges 22-17 No.
Contents 17 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Local Authenticator Messages C-21 WDS Messages C-24 Mini IOS Messages C-25 Access Point/Bridge Messages .
Contents 18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01.
-xix Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Preface Audience This guide is for the n etworkin g professional who in stalls and manages Cisco Aironet Access Points.
-xx Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Organization This guide also includes an ov ervie w of the acce ss point web-based interface (APWI), wh ich contains all the functionality of th e command-line interf ace (CLI).
-xxi Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Conventions Chapter 15, “Conf iguring QoS, ” describes ho w to conf igure and manage MA C address, IP , and EtherT ype filters on the access poi nt using the web-br ow ser interface.
-xxii Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Related Publications Caution Means reader be careful. In this situation, yo u mi ght do someth ing that coul d result equipment damage or loss of data. Ti p Means the follo wing will help you sol ve a probl em.
-xxiii Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Obtaining Do cumentation, Obta ining Support, and Security Guidelines.
-xxiv Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Obtaining Documentation, Obtaining Support, and Security G uidelines.
CH A P T E R 1-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 1 Overview Cisco Aironet Access Poin ts (herea fter called ac cess points ) provide a secure, affo.
1-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 1 Overvi ew Features • The 1300 series o utdoor access point/bridge uses an inte grated antenna and can be config ured to use external, dual-di v ersity antennas.
1-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 1 Overview Management Options Support for 802.11w Cisco IOS Release 15.2(4)J A pro vides support for the 802.11w p rotocol. Unlik e encrypted data tr af fi c, management frames are sent in an unsecure manner while using the 802.
1-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 1 Overvi ew Network Config uration Exam ples seamless and transparen t to the user .
1-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 1 Overview Network Configuration Examp les Figure 1 -2 Access P oint as Repeater Bridges The 1140, 1200, 1240, and 1250 seri es access points and the 1300 access point/b ridge can be configured as root or non-root bri dges.
1-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 1 Overvi ew Network Config uration Exam ples Figur e 1 -4 Access P oints as Root an d Non-r oot Bridg es with Clients Workgroup Bridge Y ou can configure access points as workg roup bridges.
1-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 1 Overview Network Configuration Examp les Central Unit in an All-Wireless Network In an all-wireless network, an access point acts as a stand-alone r oot unit.
1-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 1 Overvi ew Network Config uration Exam ples.
CH A P T E R 2-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 2 Using the Web-Browser Interface This chapter describes the web-brow ser interface that you can use to conf igure the wireless de vice.
2-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 2 Using th e Web-Browser Interface Using the Web-Browser Inte rf ace for the First Time Using the Web-Browser Interface for the First Time Use the wireless device IP address to br owse to the management system.
2-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 2 Using the W eb-Browser Interface Using the Management Pag es in the Web-Browser Inte rface Using Action Buttons Ta b l e 2 - 1 lists the page links and b uttons that appear on most management pages.
2-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 2 Using th e Web-Browser Interface Enabling HTTPS for Sec ure Browsing Character Restrictions in Entry .
2-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 2 Using the W eb-Browser Interface Enabling HTTPS for Secure Browsing Figur e 2-2 Expr ess Setup P age Step 3 Enter a name for the access p oint in the System Name f ield and click Apply .
2-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 2 Using th e Web-Browser Interface Enabling HTTPS for Sec ure Browsing Figur e 2-3 Services – DNS P a ge Step 5 Click Enable for DNS. Step 6 In the Domain Name f ield, enter your compan y domain name.
2-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 2 Using the W eb-Browser Interface Enabling HTTPS for Secure Browsing Step 10 Browse to the Services: HTTP W eb Server page.
2-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 2 Using th e Web-Browser Interface Enabling HTTPS for Sec ure Browsing Step 14 Another warn ing appears stating that th e access point securi ty certif icate is valid but is not from a kno wn source.
2-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 2 Using the W eb-Browser Interface Enabling HTTPS for Secure Browsing Figur e 2-7 Certificat e Window Step 16 In the Certificate windo w , click Install Certif icate .
2-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 2 Using th e Web-Browser Interface Enabling HTTPS for Sec ure Browsing Figur e 2-8 Certificat e Import Wizar d Step 17 Click Next . The next screen asks where you want to sto r e the certificate.
2-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 2 Using the W eb-Browser Interface Enabling HTTPS for Secure Browsing Figure 2-1 0 Certificat e Completion Screen Step 19 Click Finish . Windo ws displays a final security warning.
2-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 2 Using th e Web-Browser Interface Enabling HTTPS for Sec ure Browsing Figure 2-12 Import Successful Scr een Step 21 Click OK . Step 22 On the Certificate windo w shown in Figure 2-7 , which is still displayed, cli ck OK .
2-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 2 Using the W eb-Browser Interface Using Online Help Using Online Help Click the help icon at the top of an y page in the web-bro wser interf ace to display online help .
2-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 2 Using th e Web-Browser Interface Disabling the Web-Brow ser Interface Ta b l e 2 - 2 sho ws an e xample help location and He lp Root URL for an 1100 series access poi nt.
CH A P T E R 3-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 3 Using the Command-Line Interface This chapter describes the Cisco IOS command-line interface (CLI) that you can use to configure the wireless de vice.
3-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 3 Using the Comman d-Line Interface Cisco IOS Command Mode s Cisco IOS Command Modes The Cisco IOS user interface is di vided into many dif f erent modes.
3-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 3 Using th e Co mmand-Line Interface Getting Help Getting Help Y ou ca n enter a question mark (?) at the system prompt to display a list of commands a vailable for each command mo de.
3-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 3 Using the Comman d-Line Interface Using the no and Default Forms of Com mands Using the no and Default Forms of Commands Most confi guration command s also ha ve a no form.
3-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 3 Using th e Co mmand-Line Interface Using Comman d History Changing the Command History Buffer Size By default, the wi reless de vice records ten command lines in i ts history b uf fer .
3-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 3 Using the Comman d-Line Interface Using Editing Features Using Editing Features This section descri bes the editing features that can help you manipu late the command line.
3-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 3 Using th e Co mmand-Line Interface Using Editing Features Editing Command Lines that Wrap Y ou can use a wraparound feature for commands th at exten d beyond a sin gle line on the screen.
3-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 3 Using the Comman d-Line Interface Searching and Filteri ng Output of show and more Commands In this e xample, the access-list global co nfigu ration command entry e xtends be yond one line.
3-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 3 Using th e Co mmand-Line Interface Accessing the CLI Accessing the CLI Y ou c an open the wire less device CLI using T elnet or Secure Shell (SSH). Opening the CLI with Telnet Follo w these steps to open the CLI with T elnet.
3-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 3 Using the Comman d-Line Interface Accessing the CLI.
CH A P T E R 4-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 4 Configuring the Access Point for the First Time This chapter describe s how to configure basic settin gs on the wireless de vice for the first time.
4-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Before You Start Before You Start Before you install.
4-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Before You Start Step 5 Click System Software and the System Software screen appears. Step 6 Click System Conf iguration and the System Conf iguration screen appears.
4-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Logging into the Access Point Logging into the Acces.
4-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Connecting to the 1100 Series A ccess Point Locally to the 1040, 1140,1 200, 1230, 1240, 1250 , 1260, and 2600 Series Access Po ints Locally” section on page 4-6 to connect to the consol e port.
4-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Connecting to the 1130 Seri es Access Point Locally Step 2 Connect your PC to the access point using a Category 5 Ethernet cable.
4-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Connecting to the 1300 Series Access Point/Bridge Locally Step 1 Connect a nine-pin , female DB-9 to RJ-45 serial cable to the RJ-45 se rial port on the access point and to the COM port on a computer .
4-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Default Radio Settings Note When you connect your PC to the access point/bridge or reconnect yo ur PC to the wired LAN, you might need to release and renew the IP addr ess on the PC.
4-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Assigning Basic Setting s Figure 4-1 Summary Status P age Step 5 Click Express Set up . The Express Setup screen appears.
4-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Assigning Basic Settings Figur e 4-2 Expr ess Setu .
4-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Assigning Basic Setting s Figure 4-4 Expr ess Setup.
4-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Assigning Basic Settings Figur e 4-5 Expr ess Setup P age f or the 1300 Ser ies Access P oint/Br idge Step 6 Enter the conf iguration settings you obtained from your system admini strator .
4-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Assigning Basic Setting s • IP Address —Use th is setting to assign or chan ge the wi reless de vice IP address.
4-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Assigning Basic Settings • Optimize Radio Netw or.
4-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Assigning Basic Setting s IP Subnet Mask Assigned by DHCP by defa ult; if DHCP is disabled, the def ault setting is 255.
4-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring Basic Security Settings Configuring Bas.
4-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Configuring Basic Security Setting s Understanding Express Security Settings The SSIDs that you create using the Express security page appear in the SSID ta ble at the bottom of the page.
4-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring Basic Security Settings Express Security Types Ta b l e 4 - 2 describes the four security t ypes that you can assign t o an SSID.
4-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Configuring Basic Security Setting s EAP Authentication This option en ables 802.1X authentication (such as LEA P , PEAP , EAP-TLS, EAP-F AST , EAP-TTLS, EAP-GTC, EAP-SIM, and other 802.
4-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring Basic Security Settings Express Securit.
4-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Configuring Basic Security Setting s CLI Configurat.
4-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring Basic Security Settings ! interface Dot.
4-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Configuring Basic Security Setting s Example: EAP A.
4-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring Basic Security Settings ! interface Dot11Radio0/1.
4-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Configuring Basic Security Setting s aaa new-model ! ! aaa group server radius rad_eap server 10.91.104.
4-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring System Powe r Settings Access P oints bridge-group 1 no bridge-group 1 source-learning bridge-group 1 spanning-disabled ! interface FastEthernet0.
4-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Configuring System Power Settings Access Points Usi.
4-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Assigning an IP A ddress Using the CLI 1. Maximum transmit power will vary by channel and accordin g to individual country regulations.
4-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Configuring the 802.1X Supplicant If T elnet is not listed in your Accessories menu, select Start > Run , type Te l n e t in the entry field, and press Enter .
4-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring the 802.1X Supp licant Use the no form of the dot1x credent ials command to ne gate a parameter .
4-31 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Configuring the 802.
4-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring IPv6 Creating and Applying EAP Method Profiles Y ou can optionally conf igure an EAP method list to en able the supplicant to recognize a particular EAP method.
4-33 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Configuring IPv6 The follo wing modes are supp orte.
4-34 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring IPv6 normal four-message e xchange (so licit, advertise, request, rep ly). By default, the four -message exchange is used.
4-35 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Configuring IPv6 Configuring IPv6 Access Lists IPv6 access lists (ACL) are used to fi lter traf f ic and restrict ac cess to th e router .
4-36 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring IPv6 IPv6 WDS AP registration The first acti ve IPv6 address is used to regi ster the WDS.
4-37 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 4 Configuring th e Access Point for the First Time Configuring IPv6 RA filtering RA filterin g increases the security of the IPv6 network by dropp ing RAs coming from wireless clients.
4-38 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 4 Configuring the Access Point fo r the First Time Configuring IPv6.
CH A P T E R 5-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 5 Administering the Access Point This chapter de scribes ho w to administer the wirele ss de vice.
5-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Disabling the Mode Button Disabling the Mode Button Y ou can disable the mode b utton on access points ha ving a console port by using th e [no] boot mode-button co mmand.
5-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Preventing Unauthorized Acc ess to Your Access Po int Preventing Unaut.
5-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Protecting Ac cess to Pr ivileged EXEC Commands Default Password and Privilege Level Configuration Ta b l e 5 - 1 sho ws the defa ult password and p riv ilege le vel conf iguration.
5-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Protecting A ccess to Privile ged EXEC Commands This example sho w s how to ch ange the enable password to l1u2c3k4y5 .
5-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Protecting Ac cess to Pr ivileged EXEC Commands Protecting Enable and.
5-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Protecting A ccess to Privile ged EXEC Commands If both the enable and enable secret passwords are defined, users must enter the enable secret password.
5-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Protecting Ac cess to Pr ivileged EXEC Commands T o disa ble username authenticatio n for a specific user , use the no username name global configurat ion command.
5-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Configuring Easy Setup When you set a command to a privilege le vel, all commands whose syntax is a subset of that command are also set to that le vel.
5-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Configuring Spectru m Expert Mode Network Configuration T o c onf ig.
5-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Controlling Access Point Access with RADIUS Step 1 Choose Home > Easy Setup > Network Conf iguration . Step 2 From the Role in Radio Netw ork drop-dow n list choose Spectrum .
5-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Controlling Access Point Access with RADIUS RADIUS provid es detailed accounting in formation and fle x ible administ rati ve control o ver authentication and authorization processes.
5-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Controlling Access Point Access with RADIUS T o disable AAA, use the no aaa new-model global confi guration command.
5-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Controlling Access Point Access with RADIUS Defining AAA Server Groups Y ou can configure the wi reless de vice to use AAA serv er groups to group e xisting server hosts for authentication.
5-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Controlling Access Point Access with RADIUS Step 3 radius-server host.
5-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Controlling Access Point Access with RADIUS T o remove the specified RADIUS server , use the no radius-server host hostna me | ip-addr ess glo bal confi guration command.
5-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Controlling Access Poin t Access with TACACS+ T o dis able authorization, use the no aaa au thorization { network | exec } method1 global configuration command.
5-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Controlling Access Point Access with TACACS+ authentication met hods are performed. The onl y exceptio n is the default met hod list (which, b y coincidence, is named default ).
5-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Controlling Access Poin t Access with TACACS+ T o disable AAA, use the no aaa new-model global confi guration command.
5-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Configuring Ethernet Sp eed and Dupl ex Settings Configuring Ethernet Speed and Duplex Settings Y ou can assign the wireless de vice Ethernet port speed and duple x settings.
5-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Configu ring the A ccess Poin t for L oca l Authentica tion and Autho.
5-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Configuring the Authen tication Cache and Profile T o disable AAA, use the no aaa new-model global confi guration command.
5-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Configuring the Auth enti cation Cache and Profile ! aaa group server tacacs+ tac_admin server 192.
5-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Configuring the Access Poin t to Provide DHCP Service ! ip http server ip http authentication aaa no ip http secure-server ip http help-path http://www.
5-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Configuring the Access Point to Pr ovide DHCP Service http://www .cisco.com/uni vercd/cc/td/doc/product/ sof tware/i os122/122cgcr/f ipr_c/ipcprt1/1cfdhcp.
5-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Configuring the Access Poin t to Provide DHCP Service AP(dhcp-config.
5-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Configuring the Ac cess Point for Secure Shell Debug Command T o enab.
5-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Configuring Client ARP Caching Support for Secure Copy Protocol The Secure Copy Protocol (SCP) supports file transf ers between hosts on a network using Secure Shell (SSH) for security .
5-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Managing the System Time and Date Optional ARP Caching When a non-Cisco client de vice is associated to an access point and is not passing data, the wireless device might not know the client IP address.
5-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Managing the System Time and Date Understanding Simple Network Time Protocol Simple Network T ime Protocol (SNTP) is a simplif ied, client-only version of NT P .
5-31 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Managing the System Time and Date • Config uring the T ime Zone, pa.
5-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Managing the System Time and Date Beginning in privileged EXEC mode, follow these steps to set th e system clock: This exampl e sho ws ho w to manually set the system cl ock to 1:32 p.
5-33 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Managing the System Time and Date The minutes-offset variable in the clock timezone global conf iguration command is a vailable for tho se cases where a local time zone is a percentage of an hour dif ferent from UTC.
5-34 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Managing the System Time and Date The first part of the clock summer -time global conf iguration command specifies when su mmer time begins, and t he second part specif ies when it ends.
5-35 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Defining H TTP Access Defining HTTP Access By default, 80 is used fo r HTTP access, and port 443 is used for HTTPS access.
5-36 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Configuring a System N ame and Prompt When you set the system name, it is also used as the system prompt. T o return to the default host name, use th e no hostname global conf iguration command.
5-37 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Configuring a System Name and Prompt Setting Up DNS Beginning in pri .
5-38 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Creating a Banne r T o remove a do main name, use the no ip domain- name name global conf iguration command. T o remov e a name server address, use the no ip name-server server-addr ess global conf iguration command.
5-39 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Creating a Banner Beginni ng in pri vile ged EXEC mode, follo w these steps to configure a MO TD login banner: T o delete the MOTD b anner , use the no banner motd global config uration command.
5-40 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Upgrading Autonomous Cisco Aironet Access Points to Lightweight Mode Configuring a Login Banner Y ou can configure a login banner to ap pear on all c onnected termin als.
5-41 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Migrating to Japan W52 Domain Migrating to Japan W52 Domain This utility is used to migrate 802.11a radios fr om the J52 to W52 domains.
5-42 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Migrating to Japan W52 Domain.
5-43 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 5 Administering the Access Point Configuring Multiple VLAN and Rate Li miting for Point-to-Multipoint .
5-44 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 5 Admin istering the Access Point Configuring Multiple VLAN and Rate Limiting for Poin t-to-Multipoint.
CH A P T E R 6-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 6 Configuring Radio Settings This chapter describes h ow to config ure radio settings for the wireless device.
6-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Enabling the Radio Interface Enabling the Radio Interface The wireless de vice radios are disabled by def ault. Note Beginning wit h Cisco IOS Release 12.
6-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuring the Ro le in Radio Netw ork Y ou can also configure a fallback role for root access points.
6-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring the Role in Radio Network Step 3 station-role non-root {bridge.
6-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuring the Ro le in Radio Netw ork Note When you enable the role in .
6-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring the Role in Radio Network Note In point-to-multip oint bridging, WGB i s not recommended wit h the root bridge. WGB sh ould be associated to the root AP i n point-to-multi point bridging setup.
6-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuring the Ro le in Radio Netw ork Radio Tracking Y ou can configure the access point to track or monitor the status of on e of its radios.
6-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring Radio Data Rates Bridge Features Not Supported The follo wing .
6-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuri ng Radio Data Rates to be made based on reso urces av ailable to the wireless project, typ e of traf f ic the users will be passing , service lev el desired, and as always, the qu ality of the RF en vironment.
6-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring Radio Data Rates Step 3 speed 802.11b, 2.4-GHz radio: {[ 1.0 ] [ 11.0 ] [ 2.0 ] [ 5.5 ] [ basic-1.0 ] [ basic-11.
6-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuring MCS Rates Use the no form of the speed command to remov e one or more data rates from the conf iguration. This example sho ws how t o remov e data rates basic-2.
6-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring Radio Transmit Powe r MCS rates are confi gured using the speed command. The follo wing example sho ws a speed setting for an 802.
6-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuring Radi o Transmit Power Step 2 Click T echnical Support & Documentation . A small window appears contai ning a list o f technical support links.
6-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring Radio Transmit Powe r Use the no form of the po wer command to return the po wer setting to maximum , the defa ult setting.
6-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuring Radi o Transmit Power Limiting the Power Level for Associated Client Devices Y ou can also limit the po wer le vel on client de vices that associate to the wirel ess dev ice.
6-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring Radi o Channel Settings Use the no form of the client power command to disabl e the maximum po wer level for associat ed clients.
6-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuring Radio Channel Setting s Because they change frequent ly , channel settings are not in cluded in this document.
6-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring Radi o Channel Settings Dynamic Frequency Selection Access po.
6-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuring Radio Channel Setting s If radar is detected on a manually con figur ed DFS channel, the channel will be cha nged automatically and will not return to the configured channel.
6-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring Radi o Channel Settings Confirming that DFS is Enabled Use the show controllers dot11radio1 command to conf irm that DFS is enabled.
6-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuring Radio Channel Setting s The follo wing e xample selects chan.
6-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring Loca tion-Based Services This exampl e sho ws ho w to unb lock all frequencies for DFS: ap(config-if)# no dfs band block Setting the 802.
6-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuring Location-Base d Services Figure 6-2 Basic LBS Networ k Configuration The access points that you conf igure for LBS should be in the same vicinity .
6-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Enabling and Disabling World Mode In this e xample, the prof ile southside is enabled on th e access poi nt 802.11g radi o: ap# configure terminal ap(config)# dot11 lbs southside ap(dot11-lbs)# server-address 10.
6-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Disabling and Enabling Short Rad io Preambles Use the no form of the command to disable world mode.
6-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring Transmit and Receive Antenna s Short preambles are enab led by default. Use the pr eamble-short command to enable short preambles if they are disa bled.
6-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Enabling and Disab ling Gratuitous Probe Response Enabling and Disabling.
6-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Disabling and Enabling Aironet Extens ions (config-if)# probe-response gratuitous speed 12.0 (config-if)# probe-response gratuitous period 30 speed 12.
6-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuring the Ethernet Encaps ulation Transformation Method Configuring the Ethernet Encapsulation Transformation Method When the wireless device receiv es data packets that are not 802.
6-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Enabling and Disabling Public Secure Pa cket Forwarding Note This feature is best sui ted for use with stati onary workgroup bridges.
6-31 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Enabling and Disabling Pu bl ic Secure Packet Forwa rding PSPF is disabled by default. Be ginning in pri v ileged EXEC mode, follo w these steps to enable PSPF: Use the no form of the command to disable PSPF .
6-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring the Beaco n Period and the DTIM Configuring the Beacon Period and the DTIM The beacon period is the amount of time between acc ess po int beacons in Kilomicroseconds.
6-33 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Configuri ng the Maxi mum Data Retries Use the no form of the command to reset the R TS settings to def aults.
6-34 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Enabling Short Slot Tim e for 802.11g Radios Use the no form of the command to reset the setting t o defaults. Enabling Short Slot Time for 802.
6-35 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Viewing VoWLAN Metrics The Stream page appears.
6-36 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Viewing VoWLAN Metrics Viewing Voice Reports Y ou ca n use a browser to access voice reports listing V oWL AN metrics stored on a WLSE.
6-37 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Viewing VoWLAN Metrics • T o view a graph of v oice bandwidth in use during the last hour , choose Bandwidth In Use (% Allowed) from the Report Name drop-do wn list.
6-38 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Viewing VoWLAN Metrics Figur e 6-6 V oice Streaming Pr ogr ess Viewing Wireless Client Reports In addition to vie wing voice reports from an access point perspective, you can vie w them from a client perspective.
6-39 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Viewing VoWLAN Metrics Figure 6-7 Wir eless Client Metr ics Viewing Voic.
6-40 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Viewing VoWLAN Metrics Figur e 6-8 V oice Fault Summary Configuring Voice.
6-41 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Viewing VoWLAN Metrics Figure 6-9 V oice QoS Settings Configuring Voice .
6-42 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Configuring ClientLink Configuring ClientLink Cisco ClientLink (referred to as Beam Fo rming) is an intelligent beamformin g technology that directs the RF signal to 802.
6-43 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 6 Configuring Radio Settin gs Debugging Radio Functions This exampl e sho ws ho w to beg in debu gging.
6-44 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 6 Configuring Radio Settings Debugging Radi o Functions.
CH A P T E R 7-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 7 Configuring Multiple SSIDs This chapter describe s how to configure and manage multiple Service Set Identif iers (SSIDs) on the access point.
7-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 7 Config uring Multi ple SSIDs Understanding Multiple SSIDs Understanding Multiple SSIDs The SSID is a unique identif ier that wireless networki ng devices use to esta blish and m aintain wi reless connectivity .
7-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 7 Configuring Multiple SSIDs Understanding Multiple SSIDs Cisco IOS Release 12.3(10b)J A supports conf iguration of SSID parameters at the interface le vel on th e CLI, but t he SSIDs are stored in global mode.
7-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 7 Config uring Multi ple SSIDs Configuring Multiple SSIDs Configuring Multiple SSIDs These sections con.
7-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 7 Configuring Multiple SSIDs Configuring Multiple SSIDs Step 3 authentication client username username .
7-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 7 Config uring Multi ple SSIDs Configuring Multiple SSIDs Note Y o u use the ssid command authenticatio n options to configure an authen tication type for each SSID.
7-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 7 Configuring Multiple SSIDs Configuring Multiple SSIDs ssid buffalo vlan 7 authentication open Howe ve.
7-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 7 Config uring Multi ple SSIDs Configuring Multiple Basic SSIDs Configuring Multiple Basic SSIDs Access point 802.1 1a, 802.11g, 802.11n radios support up to 8 basic SSIDs (BSSIDs), which are similar to MA C addresses.
7-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 7 Configuring Multiple SSIDs Configuring Multiple Basic SSIDs Figure 7 -1 Global SSID Manager P age Step 2 Enter the SSID name in the SSID fie l d . Step 3 Use the VLAN drop-do wn list to select the VLAN to which the SSID is assign ed.
7-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 7 Config uring Multi ple SSIDs Configuring Multiple Basic SSIDs Step 7 (Optiona l) In the Mul tiple BSSI D B eacon Settings section, select the Set SSID as Guest Mode check box to include the SSID in beacons.
7-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 7 Configuring Multiple SSIDs Assigning IP Redirection for an SSID Assigning IP Redirection for an SSID.
7-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 7 Config uring Multi ple SSIDs Assigning IP Redirection for an SSID Guidelines for Using IP Redirectio.
7-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 7 Configuring Multiple SSIDs Including an SSID in an SSIDL IE This example sho w s ho w to configure IP redirection only for packets sent to the sp ecific TCP and UDP ports specif ied in an A CL applied to the BVI1 inte rface.
7-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 7 Config uring Multi ple SSIDs NAC Support for MBSSID NAC Support for MBSSID Networks must be protected fr om security threats, su ch as viruses, worms, and spyw are.
7-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 7 Configuring Multiple SSIDs NAC Support for MBSSID When a client associates and the RADIUS server det.
7-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 7 Config uring Multi ple SSIDs NAC Support for MBSSID Configuring NAC for MBSSID Note This feature supports only Layer 2 mobility within VLANs. Layer 3 mob ility using netwo rk ID is not supported in this feature.
7-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 7 Configuring Multiple SSIDs NAC Support for MBSSID authentication open authentication network-eap eap.
7-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 7 Config uring Multi ple SSIDs NAC Support for MBSSID.
CH A P T E R 8-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 8 Configuring Spanning Tree Protocol This chapter descibes ho w to configure Spanning T r ee Protocol (STP) on your access point/bridge.
8-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 8 Configur ing Spanning Tree Protocol Understanding Spannin g Tree Protocol Understanding Spanning Tree Protocol This section describes ho w spanning-tree features work.
8-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 8 Configuring Spannin g Tree Protocol Understanding Spanning Tree Protocol The access point/bridge maintain s a separate spanning -tree instance for each ac tiv e VLAN configu red on it.
8-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 8 Configur ing Spanning Tree Protocol Understanding Spannin g Tree Protocol When a access point/bridge .
8-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 8 Configuring Spannin g Tree Protocol Understanding Spanning Tree Protocol BPDUs contain information ab.
8-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 8 Configur ing Spanning Tree Protocol Understanding Spannin g Tree Protocol Spanning-Tree Interface States Propagation dela ys can occur when p rotocol informa tion passes throug h a wireless LAN.
8-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 8 Configuring Spannin g Tree Protocol Understanding Spanning Tree Protocol When the spanning-tree algorithm pl aces a Laye r 2 interface in the forwarding state, this process occ urs: 1.
8-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 8 Configur ing Spanning Tree Protocol Configuring STP Features • Receiv es BPDUs Forwarding State An interface in the forwar ding state forwards frames .
8-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 8 Configuring Spannin g Tree Protocol Configuring STP Features The radio and Ethernet interfaces and the nati ve VLAN on the access point/bridge are as signed t o bridge group 1 by def ault.
8-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 8 Configur ing Spanning Tree Protocol Configuring STP Features STP Configuration Examples These config.
8-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 8 Configuring Spannin g Tree Protocol Configuring STP Features Non-Root Bridge Without VLANs This exam.
8-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 8 Configur ing Spanning Tree Protocol Configuring STP Features ! interface Dot11Radio0 no ip address no ip route-cache ! ssid vlan1 vlan 1 infrastructure-ssid authentication open ! speed basic-6.
8-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 8 Configuring Spannin g Tree Protocol Configuring STP Features bridge 2 priority 10000 bridge 3 protoc.
8-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 8 Configur ing Spanning Tree Protocol Displaying Spanning-T ree Status encapsulation dot1Q 1 native no ip route-cache bridge-group 1 ! interface FastEthernet0.
CH A P T E R 9-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 9 Configuring an Access Point as a Local Authenticator This chapter describes ho w to conf igure t.
9-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 9 Co nfiguring an Ac cess Point as a Local Authenticator Understanding Local Authentication Understanding Local Authentication Many smal l wireless LANs that could be made more secure w ith 802.
9-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 9 Configuring an Acce ss Point as a Local Auth enticator Configuring a Local Au thenticator Guidelines .
9-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 9 Co nfiguring an Ac cess Point as a Local Authenticator Configuring a Local Authenticato r Step 3 radius-server local Enable the access point as a local authenticator and enter conf iguration mode for the auth enticator .
9-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 9 Configuring an Acce ss Point as a Local Auth enticator Configuring a Local Au thenticator This exampl.
9-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 9 Co nfiguring an Ac cess Point as a Local Authenticator Configuring a Local Authenticato r AP(config-r.
9-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 9 Configuring an Acce ss Point as a Local Auth enticator Configuring a Local Au thenticator Each time t.
9-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 9 Co nfiguring an Ac cess Point as a Local Authenticator Configuring a Local Authenticato r In this exa.
9-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 9 Configuring an Acce ss Point as a Local Auth enticator Configuring a Local Au thenticator Limiting th.
9-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 9 Co nfiguring an Ac cess Point as a Local Authenticator Configuring a Local Authenticato r The second section lists stats for each acces s point (N A S) authorized to use th e local authenticator .
CH A P T E R 10-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 10 Configuring Cipher Suites and WEP This chapter describes ho w to configure th e cipher suites .
10-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 10 Configurin g Cipher Suites and WEP Understanding Cipher Suites and WEP Understanding Cipher Suites and WEP This section descri bes ho w WEP and cipher suit es protect traf fic on your wireless LAN.
10-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 10 Configuring Cipher Suites a nd WEP Configuring Cipher Suites an d WEP • TKIP (T emporal K ey Inte.
10-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 10 Configurin g Cipher Suites and WEP Configuring Ci pher Suites and WEP Beginni ng in pri vileged EXE.
10-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 10 Configuring Cipher Suites a nd WEP Configuring Cipher Suites an d WEP WEP Key Restrictions T able 10-1 lists WEP key restrictions based o n your securit y configuration.
10-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 10 Configurin g Cipher Suites and WEP Configuring Ci pher Suites and WEP Note If you enable MIC but yo.
10-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 10 Configuring Cipher Suites a nd WEP Configuring Cipher Suites an d WEP Use the no form of the encryption command to disable a cipher suite.
10-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 10 Configurin g Cipher Suites and WEP Configuring Ci pher Suites and WEP Note If using WP A and CCKM as ke y ma nagement, only tkip and aes ciphers are supported .
10-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 10 Configuring Cipher Suites a nd WEP Configuring Cipher Suites an d WEP Beginni ng in pri vile ged EXEC mode, follo w th ese steps to enable broadcast k ey rotati on: Use the no form of the encryption command to disable b roadcast key rotation.
10-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 10 Configurin g Cipher Suites and WEP Configuring Ci pher Suites and WEP.
CH A P T E R 11-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 11 Configuring Authentication Types This chapter describes how to conf igure authenticati on types on the access point.
11-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Understanding Authe ntication Types Understanding Authentication Types This section describes the authentication types that you can co nfigure on the access point.
11-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Understanding Authentication Types Figur e 1 1 -1 Sequence for Open A uthentication Shared Key Authentication to the Access Point Cisco provides shared k ey authenti cation to comply with the IEEE 8 02.
11-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Understanding Authe ntication Types EAP Authentication to the Network This authentication t ype provides t he highest le vel o f security for your wireless network.
11-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Understanding Authentication Types There is more than one typ e o.
11-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Understanding Authe ntication Types Figur e 1 1 -4 Sequence for M.
11-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Understanding Authentication Types Figure 11-5 sho ws the reassociation proce ss using CCKM.
11-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Understanding Authe ntication Types Figure 11-6 sh ows the WP A key management process.
11-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Understanding Authentication Types T o support the security combi.
11-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Configuring Authen tication Types Note When you configure TKIP -.
11-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Configuring Authen tica tion Types Step 3 authentication open [ mac-address list -name [ alter nate ]] [[ optional ] eap list-name ] (Optional) Set the authenticati on type to open for this SSID.
11-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Configuring Authen tication Types Step 5 authentication network-eap list-name [ mac-address list -name ] (Optional) Set the authenticati on type for the SSID to Network-EAP .
11-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Configuring Authen tica tion Types Use the no form of the SSID commands to disable th e SSID or to disable SSID features.
11-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Configuring Authen tication Types Configuring Additional WPA Settings Use two optional sett ings to conf igure a preshar ed key o n the access point and adjust the frequ ency of group k ey upd ates.
11-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Configuring Authen tica tion Types This exampl e sho ws ho w to .
11-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Configuring Authen tication Types This exampl e sho ws how to en.
11-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Configuring Authen tica tion Types Use the no form of these commands to reset the v alues to default settings. Creating and Applying EAP Method Pr ofiles for the 802.
11-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Configuring Authen tication Types Creating an EAP Method Profile Beginni ng in pri vile ged ex ec mode, follo w these steps to define a ne w EAP profile: Use the no command to negate a command or set it s defaults.
11-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Matching Access Point and Client Device Authentication Type s Applying an EAP Prof ile to an Uplink SSID This operation typical ly applies to repeater access points.
11-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Matching Access Point and Client Device Au thentication Types T .
11-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Matching Access Point and Client Device Authentication Type s 802.1X authen tication and CCKM Enable LEAP Select a ciph er suite and enable Network-EAP an d CCKM for the SSID Note T o allow both 80 2.
11-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Guest Access Man agement Guest Access Management Guest Access allows a guest to gain access to the Internet, and the guest’ s o wn enterprise wit hout compromising the security o f the host enterprise.
11-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Guest Access Management Guest access is allowed through these me.
11-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Guest Access Man agement Beginni ng in pri vile ged EXEC mode, u.
11-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 11 Configuring Authen tication Types Guest Access Management Guest access is allo wed for a maximum of twent-four days and a mini mum of fi ve minutes.
11-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 11 Configurin g Authentication Types Guest Access Man agement – ap(config-ext-nacl)# permit tcp any host 40.40.5.10 eq 443 – ap(config-ext-nacl)# exit Note acl-in and acl-out are the names of the Access-list.
CH A P T E R 12-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 12 Configuring WDS, Fast Secure Roaming, Radio Management, and Wireless Intrusion Detection Servi.
12-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Unders.
12-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services.
12-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Unders.
12-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services Understanding Radio Mana gement device.
12-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Unders.
12-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services Configuring WDS access points.
12-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Config.
12-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services Configuring WDS Figure 12-4 sho ws the required configuration for each de vice that pa rticipates in WDS.
12-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
12-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Service.
12-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring WDS Figur e 12-7 WDS Server Gr oups P age Step 10 Create a group of serv ers to be used for 802.
12-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services Configuring WDS Step 14 Config ure the list of serv ers to be us ed for 802.
12-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
12-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Service.
12-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring WDS Figur e 12-9 Networ k Configuration P age Step 2 Click Add Entry unde r the AAA C lients tabl e.
12-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services Configuring WDS Figure 12-1 0 Add AAA Client P age Step 3 In the AAA Client Hostname f ield, enter the name of the WDS de vice.
12-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring WDS Step 9 Click User Setup to bro wse to the User Setup page.
12-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services Configuring WDS Step 13 Select CiscoSecure Database from the P assword Aut hentication drop-d own li st.
12-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring WDS Viewing WDS Information On the web-b rowser interface, browse to the W irele ss Services Summary page to vie w a summary of WDS status.
12-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Service.
12-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
12-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services Configuring Fast Secure Roaming Figure 12-15 Global SSID Ma nager P age Step 6 On the SSID that suppor ts CCKM, select these settings: a.
12-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Configuring Fa st Secure Roaming c. Select Mandatory or Optional under Authenticate d Ke y Managemen t.
12-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services Configuring Management Frame Protection Step 4 Click the over-air or ove r -ds radio butt on.
12-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
12-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services Configuring Management Frame Protection rejected.
12-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
12-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services Configuring Management Frame Protection This CLI command is us ed to en able 802.
12-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
12-31 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Services Configuring Radio Mana gement Figure 12-1 7 WDS/WNM General Setup P age Step 4 Check the Configure W ireless Network Manager check box.
12-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
12-33 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 12 Configuring WDS, Fast Secure Roaming, Radio Management, an d Wireless Intrusion Dete ction Service.
12-34 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 12 Configuring WD S, Fast Secure Roam ing, Radio Management, and Wi reless Intrusio n Detection Confi.
CH A P T E R 13-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 13 Configuring RADIUS and TACACS+ Servers This chapter describes ho w to enable and configur e th.
13-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS Understanding RADIUS RADIUS is a distributed client/server system th at secures networks against unauthorized access.
13-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enab ling RADIUS Figur e 13-1 Sequence fo r EAP A uthentication In Steps 1 through 9 in Fi gure 13-1 , a wireless client devi ce and a RADIUS serv er on the wired LAN use 802.
13-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS A method list def ines the sequence and methods to be used to au thenticate, to author ize, or to keep accounts on a user.
13-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enab ling RADIUS Y ou identify R ADIUS security server s by their host name or IP address, host name and specif ic UDP port numbers, or t heir IP address and specif ic UDP po rt numbers.
13-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS Step 3 radius server {host.
13-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enab ling RADIUS T o remove the specified RADIUS server , use the no radius-server host hostna me | ip-addr ess glo bal confi guration command.
13-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS T o disable AAA, use the no aaa new-model global confi guration command.
13-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enab ling RADIUS Defining AAA Server Groups Y ou can configure the access point t o use AAA server gr oups to group e xisting serv er hosts for authentication.
13-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS Step 3 radius-server host.
13-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enab ling RADIUS T o remove the specified RADIUS server , use the no radius-server host hostna me | ip-addr ess glo bal confi guration command.
13-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS Beginni ng in pri vileged.
13-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enab ling RADIUS Note When WDS is configured, PoD requ ests should be directed to the WDS.
13-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS T o disable accounting, use the no aaa accounting { network | exec } { start-stop } method1.
13-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enab ling RADIUS Configuring Settings fo r.
13-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS This ex ample sho ws how .
13-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enab ling RADIUS For a complete list of RA.
13-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS T o delete the vendor -proprietary RADIUS host, use the no radius-server host { hostna me | ip-addr ess } non-standard global conf iguration command.
13-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enab ling RADIUS Beginning in pri vile ged.
13-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS RADIUS Attributes Sent by.
13-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enab ling RADIUS T able 1 3-4 At tr ibutes.
13-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling RADIUS Note By default, the access point sends reauthenticati on requests to the authenticat ion server with the service-type attrib ute set to authenticat e-only .
13-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enabling TACACS+ Configuring and Enabling .
13-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling TACACS+ TACACS+ Operation When an administrator attempts a simple ASCII login by authenticating to an access po int using T A CA CS+, this process occurs: 1.
13-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enabling TACACS+ This section contains thi.
13-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling TACACS+ T o remove the specified T A CA CS+ server name or address, use the no tacacs-server host hostname global conf iguration command.
13-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enabling TACACS+ T o disable AAA, use the no aaa new-model global confi guration command.
13-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling TACACS+ The aaa authoriza tion e.
13-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 13 Configuring RADIUS and TACACS+ Server s Configuring and Enabling TACACS+ T o disable accounting, use the no aaa accounting { network | exec } { start-stop } method1.
13-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 13 Config uring RADIUS and TACACS+ Servers Configuring and Enab ling TACACS+.
CH A P T E R 14-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 14 Configuring VLANs This chapter describes how to configure your access point to operate with the VLANs set up on your wired LAN.
14-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 14 Configuring VLA Ns Understanding VLANs Understanding VLANs A VLAN is a switched network that is logically segmen ted, by functions, project teams, or applications rather than on a physical or geographical basis.
14-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 14 Configuring VLANs Understanding VLANs Figur e 14-1 LAN and VLAN Segmentation with Wireless Devices .
14-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 14 Configuring VLA Ns Configuring VLANs Incorporating Wireless Devices into VLANs The basic wireless componen ts of a VLAN consist of an access point and a client associated to it using wireless technology .
14-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 14 Configuring VLANs Configuri ng VLANs Configuring a VLAN Note When you confi gure VLANs on access points, the nati ve VLAN must be VLAN1.
14-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 14 Configuring VLA Ns Configuring VLANs Step 3 ssid ssid-string Create an SSID and enter SSID configuration mode for the new SSID. The SSID can consist of up t o 32 alphanumeric characters.
14-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 14 Configuring VLANs Configuri ng VLANs This example sho ws how to: • Name an SSID • Assign the SS.
14-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 14 Configuring VLA Ns Configuring VLANs Creating a VLAN Name Beginning in pri vileged EXEC mod e, follo w these steps to assign a name to a VLAN: Use the no form of the command to remov e the name from the VLAN.
14-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 14 Configuring VLANs Configuri ng VLANs Using a RADIUS Server for Dynamic Mobility Group Assignment Y ou can configure a RADIUS server to dynamically assi gn mobility groups to users or user g roups.
14-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 14 Configuring VLA Ns VLAN Configuration Ex ample Virtual-Dot11Radio0 Protocols Configured: Address: Received: Transmitted: Bridging Bridge Group 1 201688 0 Bridging Bridge Group 1 201688 0 Bridging Bridge Group 1 201688 0 Virtual LAN ID: 2 (IEEE 802.
14-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 14 Configuring VLANs VLAN Configuration Example 4. Configure VLAN 1, the Management VLAN, on both the fastEthernet and do t11radio interfaces on the access point.
14-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 14 Configuring VLA Ns VLAN Configuration Ex ample T able 14-3 shows th e results of the conf iguration commands in T able 14-2 . Use the sho w running command to display th e running conf igurati on on the access point.
CH A P T E R 15-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 15 Configuring QoS This chapter describes how to conf igure quality of se rvice (QoS) on your access point. W ith this feature, you can provide preferential treatment to certain traff i c at the expense of others.
15-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 15 Configuring QoS Understanding QoS for Wireless LANs Understanding QoS for Wireless LANs T ypically .
15-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 15 Configuring QoS Understanding QoS for Wireless LANs QoS on the wireless LAN focuses on do wnstream prioritization from the access point. Fi gure 15-1 sho ws the upstream and downstream traf f ic flow .
15-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 15 Configuring QoS Understanding QoS for Wireless LANs Note This release continues to support e xisting 7920 wireless phone f irmwa re. Do not attempt to u se the ne w standard (IEEE 802.
15-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 15 Configuring QoS Understanding QoS for Wireless LANs Using Band Select Band Select allo ws you to mo ve to the less cong ested radios if your W i-Fi radios are capable of dual band operati on.
15-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 15 Configuring QoS Configuring QoS - ap (conf ig)# dot11 ssid abcd - ap(conf ig-ssid)# band-select Configuring QoS QoS is disabled by default (ho wever , the radio interf ace al ways honors tagged 802.
15-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 15 Configuring QoS Configuri ng QoS Figur e 15-2 QoS Policies P age Step 3 Wi t h <NEW> selected in the Create/Edit Polic y f ield, type a name for the QoS polic y in the Policy Name entry fi eld.
15-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 15 Configuring QoS Configuring QoS Step 4 If the packets that you need to pr ioritize contain IP preced ence information in the IP header TOS field, select an IP precedence classifica tion from the IP Precede nce drop-do w n list.
15-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 15 Configuring QoS Configuri ng QoS • Class Selector 1 • Class Selector 2 • Class Selector 3 •.
15-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 15 Configuring QoS Configuring QoS Step 19 Click the A pply bu tton at the bottom of the page to apply the policies t o the access point ports.
15-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 15 Configuring QoS Configuri ng QoS IGMP Snooping When Internet Group Membership Protocol (IG MP) snooping is enabled on a switch and a client roams from one access point to another, the clients’ multicast session is dropped.
15-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 15 Configuring QoS Configuring QoS Adjusting Radio Access Categories The access point uses the radio access categories to calculate backoff times for each packet.
15-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 15 Configuring QoS Configuri ng QoS Figur e 15-4 Radio Access Categ or i es P a ge Note In this release, clients are blocked from using an access category when you select Enable for Admission Control.
15-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 15 Configuring QoS Configuring QoS http://cisco. com/en/US/docs/wireless/access_poin t/12.4_10b_J A/command/reference/cr12410b-chap2 . html#wp325708 0 Note The abov e rates work f ine for Cisco phones.
15-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 15 Configuring QoS QoS Configuration Examples Troubleshooting Admissio n Control Y ou can use two CLI.
15-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 15 Configuring QoS QoS Configuration Example s Figure 15-5 QoS Policies P age f or V oice Example The network admin istrat or also enables the QoS element for wir eless phones setting on the QoS Policies - Adv anced page.
15-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 15 Configuring QoS QoS Configuration Examples Figure 15-6 QoS Policies P age for Video Example.
15-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 15 Configuring QoS QoS Configuration Example s.
CH A P T E R 16-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 16 Configuring Filters This chapter describe s how to configure and manage MA C address, IP , and EtherT ype filters on the access point using the we b-bro wser interface.
16-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 16 Configuring Filters Understanding Filters Understanding Filters Protocol filters (IP protocol , IP port, and EtherT ype) pr ev en t or allow the use of specific protocols through the acc ess point’ s Ethernet and rad io ports.
16-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Browser Interface Configuring Filters Using the Web-Browser Interface This section descri bes ho w to conf igure and enab le f ilters using the web-bro wser interface.
16-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Br owse r Interface Figure 16-1 MAC Addr ess Filters P age Follo w this link path to reach the Address Filters page: 1.
16-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Browser Interface Step 5 Use the Mask entry field to indicate ho w many bits, from left to right, the f ilter checks against the MA C address.
16-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Br owse r Interface If clients are not f iltered immediately , click Reload on the System Confi guration page to restart t he access point.
16-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Browser Interface Step 3 Click Advanced Security to bro wse to the Adv anced Security: MA C Address Authentication page.
16-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Br owse r Interface Step 6 Click A pply . Creating a Time-Based ACL T ime-ba sed A CLs are ACLs that can be enabled or disabled for a specific period of time.
16-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Browser Interface ACL Logging A CL logging is not supported on the br idging interfaces of A P platforms.
16-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Br owse r Interface Figure 16-6 I P Filters P age Follo w this link path to reach the IP Filters page: 1.
16-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Browser Interface Creating an IP Filter Follo w these steps to create an IP filter: Step 1 Follo w the link path to the IP Filters page.
16-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Br owse r Interface Step 15 When the f ilter is complete, click A pply . The f ilter is sav ed on the access point, but it i s not enabled unti l you apply it on the Appl y Filters pa ge.
16-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Browser Interface Figur e 16-8 Ethe rT ype Filters P age Follo w this link path to reach the EtherT ype Filters page: 1.
16-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 16 Configuring Filters Configuring Filters Using the Web-Br owse r Interface Step 7 Click Add . The EtherT ype appears in the Filters Classes fi eld. T o remove the EtherT ype from the Filters Classes list, select it and click Delete Class .
CH A P T E R 17-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 17 Configuring CDP This chapter describes ho w to configure Cisco Disco very Protocol (CDP) on your access point .
17-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 17 Configur ing CDP Understanding CDP Understanding CDP Cisco Discov ery Protocol (CDP) is a de vice-disco v ery protocol that runs on all Ci sco network equipment.
17-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 17 Configuring CDP Configuring CDP Use the no form of the CDP commands to return to the def ault settings.
17-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 17 Configur ing CDP Monitoring and Maintaining CDP This e xample sho ws how to enable CDP .
17-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 17 Configuring CDP Monitori ng and Maintaining CDP Belo w are si x exampl es of output from t he CDP s.
17-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 17 Configur ing CDP Monitoring and Maintaining CDP Device ID: idf2-1-lab-l3.
17-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 17 Configuring CDP Monitori ng and Maintaining CDP AP# show cdp neighbor Capability Codes: R - Router,.
17-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 17 Configur ing CDP Monitoring and Maintaining CDP.
CH A P T E R 18-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 18 Configuring SNMP This chapter describe s how to configure the Simple Network Managemen t Protocol (SNM P) on your access point.
18-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 18 Configu ring SNMP Understanding SNMP Understanding SNMP SNMP is an appli cation-layer protocol that p r ovides a message format for communication between SNMP manage rs and agents.
18-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 18 Configuring SNMP Understanding SNMP T able 18-1 lists the SNMP versio ns and security le vels supported on access points. For detailed infor mation on SN MPv3, click th is link to browse to the Ne w F eature Do cumentation for Cisco IOS Release 12.
18-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 18 Configu ring SNMP Understanding SNMP SNMP Agent Functions The SNMP agent responds to SNMP manager request s as follo ws: • Get a MIB variable—The SNM P agent b egins this func tion in r esponse to a request f rom the NMS.
18-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 18 Configuring SNMP Configuring SNMP Configuring SNMP This section descri bes ho w to conf igure SNMP on your access point.
18-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 18 Configu ring SNMP Configuring SNMP Configuring Community Strings Y ou use the SNMP community string to def ine th e relationship between the SNMP manager and the agent.
18-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 18 Configuring SNMP Configuring SNMP T o disable access for an SNMP community , set the communi ty string for that community to the null string (do not enter a v alue for th e community string).
18-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 18 Configu ring SNMP Configuring SNMP Configuring SNMP-Server Hosts T o configure the recip ient of an.
18-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 18 Configuring SNMP Configuring SNMP Some notif ication types cannot be contro lled with the snmp-server enable global conf iguration command, such as udp-port .
18-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 18 Configu ring SNMP Configuring SNMP T o remov e the specified hos t from receiving traps , use the no snmp-server host host global confi guration command.
18-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 18 Configuring SNMP Configuring SNMP This example sho ws how to assign the strings open and ieee to S.
18-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 18 Configu ring SNMP Displaying SNMP Status AP(config)# snmp-server group admin v3 priv read iso writ.
CH A P T E R 19-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 19 Configuring Repeater and Standby Access Points and Workgroup Bridge Mode This chapter describes how to conf ig ure your a ccess point as a repeater , as a hot standby unit, or as a workgroup bridge.
19-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Understanding Repeater .
19-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 19 Configuring Repeater a nd Standby Access Po ints and Workgro up Bridge Mode Configuring a Repeater .
19-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Configuring a Re peater Access Point Default Configuration Access points are configured as root units by default.
19-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 19 Configuring Repeater a nd Standby Access Po ints and Workgro up Bridge Mode Configuring a Repeater .
19-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Aligning Antennas The f.
19-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 19 Configuring Repeater a nd Standby Access Po ints and Workgro up Bridge Mode Aligning Antennas Use the show dot11 antenna-alignment command to list the MA C addresses and signal level for the last 10 de vices that responded to the probe.
19-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Aligning Antennas Setti.
19-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 19 Configuring Repeater a nd Standby Access Po ints and Workgro up Bridge Mode Understanding Hot Standby Understanding Hot Standby Hot Standby mode designates an access point as a backup for another acces s point.
19-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Configuring a Hot Stan.
19-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 19 Configuring Repeater a nd Standby Access Po ints and Workgro up Bridge Mode Configuring a Hot Stan.
19-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Configuring a Hot Stan.
19-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 19 Configuring Repeater a nd Standby Access Po ints and Workgro up Bridge Mode Understanding Workgrou.
19-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Understanding Wo rkgroup Brid ge Mode Caution An access point in workgroup bridge mode can introd uce a bridge loop if you co nnect its Ethernet port to your wired LAN.
19-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 19 Configuring Repeater a nd Standby Access Po ints and Workgro up Bridge Mode Understanding Workgroup Bridge Mode Figure 19-2 sho ws an a ccess point in workgroup br idge mode.
19-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Understanding Wo rkgroup Brid ge Mode bridges, t hat can as sociat e to an access point or bridge.
19-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 19 Configuring Repeater a nd Standby Access Po ints and Workgro up Bridge Mode Workgroup Bridge VLAN Tagging The follo wing e xample sho ws ho w the command is used .
19-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Configuring Work group Bridge Mode In the upstream direction, WGB remo ves the 802 .
19-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 19 Configuring Repeater a nd Standby Access Po ints and Workgro up Bridge Mode Configuring Workgroup Bridge Mode This exampl e sho ws how to conf igure an 1100 series access point as a workgroup bri dge.
19-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Using Workgroup Bridge.
19-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 19 Configuring Repeater a nd Standby Access Po ints and Workgro up Bridge Mode Using Workgroup Bridge.
19-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Using Workgroup Bridge.
19-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 19 Configuring Repeater a nd Standby Access Po ints and Workgro up Bridge Mode Using Workgroup Bridge.
19-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 19 Configurin g Repeater and Stan dby Access Points and Workgroup Br idge Mode Using Workgroup Bridge.
CH A P T E R 20-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 20 Managing Firmware and Configurations This chapter describ es how to manipulate the Flash fi le system, ho w to copy configuration f iles, a nd ho w to archiv e (upload and download) software images.
20-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with the Flash File System Displaying Available File .
20-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with the Flash File System Setting the Default File Sy.
20-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with the Flash File System Creating and Removing Dire.
20-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with the Flash File System • From a startup conf igu.
20-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with the Flash File System • For the T rivial Fil e T ransfer Protocol (TFTP), the syntax i s tftp: [[ // location ] / dir ectory ] / tar- fil ename .
20-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Configuration File s Extracting a tar File T o e .
20-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Configuration Files Yo u c a n c o p y ( downloa.
20-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Configuration File s config uration is used. Ho wever , some commands in the e xisting conf iguration might not be replaced or nega ted.
20-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Configuration Files Preparing to Download or Up.
20-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Configuration File s The configuration f ile do w nloads, and the commands are executed as th e f ile is parsed line-by-line.
20-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Configuration Files • The access point forms a password named username@apn ame.
20-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Configuration File s This example sho ws how to cop y a config uration f ile named host1-confg from the netadmin1 directory on the remo te server with an IP address of 172.
20-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Configuration Files This exampl e sho ws how to copy the run ning conf iguration f ile named ap2-confg to the netadmin1 directory on the remote host with an IP address of 172.
20-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Configuration File s access to a server that supports the remote shell (rsh). (Most UNIX systems support rsh.
20-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Configuration Files ap1.company.com ap1 For more information, r efer to th e documentation for yo ur RCP server .
20-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Configuration File s %SYS-5-CONFIG_NV:Non-volatile store configured from host2-config by rcp from 172.
20-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Software Image s Deleting a Stored Configuration File Caution Y ou cannot restore a file af ter it has been deleted.
20-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Software Images tar File Format of Images on a Server or Cisco.com Software images located on a server or d ownload ed from Cisco .
20-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Software Image s Note Y ou must restart the inetd daemon after modify ing the /etc/inetd.conf and / etc/services f iles.
20-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Software Images Note T o a void an unsuccessful .
20-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Software Image s The algorithm installs the do wnloaded image on the system board Flash de vice (flash:).
20-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Software Images • Downloading an Image File by.
20-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Software Image s For more information, r efer to th e documentation for yo ur FTP server .
20-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Software Images Note T o a void an unsuccessful .
20-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Software Image s If you specify the /lea ve-old-sw , the e xisting f iles are not remo ved.
20-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Software Images The archiv e upload-sw command b uilds an image f ile on the serv er by uploading th ese fi les in order: info, the Cisco IOS image, th e HTML files, and i nfo.
20-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Software Image s RCP requires a client to send a remote usern ame on each RCP request to a server .
20-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Software Images Downloading an Image File by Using RCP Y ou c an download a ne w image file an d replace or keep the current image.
20-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Software Image s Note T o a void an unsuccessfu.
20-31 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Software Images Note If the Flash de vice has suff icient space to hold two images and you want to ov erwrite one of these images with the same versi on, you must specify the /ov erwrite optio n.
20-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Software Image s The archive upload-sw pri vile ged EXEC command buil ds an image f ile on the serv er by uploading these files in order: info, the Cisco IOS i mage, the HTML files, and info.
20-33 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 20 Managing Firmware and Configurations Working with Software Images Step 7 Click the Upgrade b utton. For additi onal information, cl ick the Help icon on the Software Upgrade screen.
20-34 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 20 Mana ging Firmware and Configurations Working with Software Image s.
CH A P T E R 21-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 21 Configuring System Message Logging This chapter describes how to conf igure sy stem message logging on your acces s point.
21-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 21 Config uri ng System Message Logg ing Understanding System Message Lo gging Understanding System Message Logging By default, access points send the outpu t from system messages and deb ug privile ged EXEC commands to a logging process.
21-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 21 Configuring System Message Logging Configuring System Message Lo gging T able 21-1 describes the elements of syslog messages.
21-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 21 Config uri ng System Message Logg ing Configuring System Message Logging Disabling and Enabling Message Logging Message logging is enabled by default.
21-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 21 Configuring System Message Logging Configuring System Message Lo gging Setting the Message Display Destination Device If message logging is en abled, you ca n send messages to specific locati ons in addition to the cons ole.
21-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 21 Config uri ng System Message Logg ing Configuring System Message Logging Enabling and Disabling Timestamps on Log Messages By default, log messag es are not timestamped.
21-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 21 Configuring System Message Logging Configuring System Message Lo gging This example sh ow s part of a logging display with sequenc e numbers enabled: 000019: %SYS-5-CONFIG_I: Configured from console by vty2 (10.
21-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 21 Config uri ng System Message Logg ing Configuring System Message Logging T able 21-3 describes the level ke yword s. It also lists the corresponding UNIX syslo g defini tions from the most se vere le vel to the least se vere le vel.
21-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 21 Configuring System Message Logging Configuring System Message Lo gging Beginni ng in pri vile ged E.
21-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 21 Config uri ng System Message Logg ing Configuring System Message Logging Configuring UNIX Syslog Servers The next sections describe how to configure the 4.
21-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 21 Configuring System Message Logging Configuring System Message Lo gging T o remove a syslog server , use the no logg ing host global conf iguration comman d, and specify the syslog server IP address.
21-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 21 Config uri ng System Message Logg ing Displaying the Logging Configuration Displaying the Logging Configuration T o display the current logging con figur ation and the co ntents of the log b uffer , use the show lo gging pri vileged EXEC co mmand.
CH A P T E R 22-1 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 22 Troubleshooting This chapter pro vides troubleshooting procedures for basic p roblems with the wireless de vice.
22-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Checking the Top Panel Indicators Checking the Top Panel Indicators If your wireless de vice is not communicating, check the three LED indicators on the top panel to quickly assess the device ’s status.
22-3 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Checking the Top Pan el Indicators Figur e 22-2 Indicators on the 1 1 00 Series A c.
22-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Checking the Top Panel Indicators Figur e 22-4 Indicators on the 350 Ser ies Acces.
22-5 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Checking the Top Pan el Indicators Note Regarding LED status colors, it is expected that there will be small v ariations in color intensity and hue from unit to unit.
22-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Checking the Top Panel Indicators The LED signals are listed in Ta b l e 2 2 - 2 .
22-7 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Checking the Top Pan el Indicators Note Regarding LED status colors, it is expected that there will be small v ariations in color intensity and hue from unit to unit.
22-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Checking the Top Panel Indicators Indicators on 1040 or 1140 Series Access Point If your access point i s not workin g properly , check the Eth ernet and Status LEDs of the uni t.
22-9 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Checking the Top Pan el Indicators 48VD C MO D E CO NSOL E E T HE RNE T 207523 2 3 .
22-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Checking the Top Panel Indicators Note It is expected that there will be small va riations in LED color intensity and hue from unit to unit.
22-11 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Checking the Top Pan el Indicators Indicators on 1240 Series Access Points If your access point is not w orking properly , check the Status, Ethernet, and Radio LEDs on the 2.
22-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Checking the Top Panel Indicators Note It is expected that there will be small va riations in LED color intensity and hue from unit to unit.
22-13 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Checking the Top Pan el Indicators Indicators on 1250 Access Points If your access point is not w orking properly , check the Ethernet, Status, and Radio LEDs on the 2.
22-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Checking the Top Panel Indicators T able 2 2-5 1250 Ser ies Access P oint LED Signals Message type Ethernet LED Status LED Radio LED Meaning Boot loader status G reen Off Amber DR AM test in progress.
22-15 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Checking the Top Pan el Indicators Note It is expect ed that there will be small v ariations in LED color intensity and hue from unit to un it.
22-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Checking the Top Panel Indicators Figur e 22-8 126 0 Ser i es Access P oint LED T able 22-6 shows th e 1260 access point LED indicators for v arious conditions.
22-17 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Checking the Top Pan el Indicators Indicators on 1300 Outdoor Access Point/Bridges If your access point/bridge is no t associating with a remot e bridge or access point, check the four LEDs on the back panel.
22-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Checking the Top Panel Indicators Figur e 22-9 LEDs Normal Mode LE D Indications During access poi nt/bridge op eration the LEDs provide status information as sho w n in T a ble 22-7 .
22-19 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Checking the Top Pan el Indicators Note It is expect ed that there will be small v ariations in LED color intensity and hue from unit to un it.
22-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Checking the Top Panel Indicators Power Injector When the po wer injector is po wered up, it applie s 48-VDC to the dual-coax cables to the access point/bridge.
22-21 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Checking Power • Cisco Aironet Power Injector LR2— standard (inclu ded with th.
22-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Checking Basic Settings access point remains in lo w power mode wi th the radios disabled to pre vent a possible o ve r-cu rrent condition.
22-23 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Resetting to the Default Configuration Note The wireless de vice MAC address th at appears on the Status page in the Air onet Client Utility (A CU) is the MA C address for the wireless device radio.
22-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Resetting to th e Default Configuration Using the Web Browser Interface Follo w t.
22-25 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Reloading the Access Point Image flashfs[0]: flashfs fsck took 0 seconds. ...done initializing Flash. Step 5 Use the dir flash: command to display the contents of Flash and f ind the config.
22-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Reloading the A ccess Point Image Using the MODE button Y ou can use the MODE but.
22-27 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Reloading the Access Point Image Browser HTTP Interface The HTTP interface enables you to bro w se to the wireless de vice image file on your PC and do wnload the image to the wireless de vice.
22-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Reloading the A ccess Point Image Using the CLI Follo w the steps belo w to reload the wirel ess de vice image using the CLI.
22-29 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Reloading the Access Point Image extracting c350-k9w7-mx.122-13.JA1/html/level1/appsui.js (558 bytes) extracting c350-k9w7-mx.122-13.
22-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Image Recovery on the 1520 Access Point Step 6 Click IOS . A list of av ailable C isco IOS versions appears. Step 7 Choose the v ersion you wish to do wnload.
22-31 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Image Recovery on the 1520 Access Point T o perform image recovery on the 15 20 access point, follo w these steps: Step 1 W ith the ac cess point powered of f, connect an RJ45 console cable t o the console port ().
22-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Image Recovery on the 1520 Access Point Note If the ENABLE_BREAK=no envir onmental variab le is set, you will not be able to escape to the bootloader .
22-33 Cisco IOS Software Configuratio n Guide for Cisco Aironet Ac cess Points OL-29225-01 Chapter 22 Troubleshooting Image Recovery on the 1520 Access Point MAC_ADDR=00:1F:27:75:DB:00 MAC_ADDR_BLOCK_SIZE=01 00 NETMASK=255.
22-34 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Chapter 22 Troublesho oting Image Recovery on the 1520 Access Point.
A-1 Cisco IOS Software Configuration Guide for Cisco Aironet Access Points OL-29225-01 APPENDIX A Protocol Filters The tables in this appendix list some of the prot ocol s that you can f ilter on th e access point.
A-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix A Protocol Filters T able A -1 Ether T ype Prot ocols Protocol Additional Identifier ISO Designator ARP — 0x0806 RARP — 0x8035 IP — 0x0800 Berkele y T railer Negotiation — 0x1000 LAN T est — 0x0708 X.
A-3 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix A Protocol Filters T able A -2 IP Protocols Protocol Additional Identifier ISO Designator dummy — 0 I.
A-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix A Protocol Filters T able A -3 IP P or t Pr ot ocols Protocol Additional Identifier ISO Designator TCP.
A-5 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix A Protocol Filters TSAP iso-tsap 102 CSO Name Serv er cso-ns csnet-ns 105 Remote T elnet rtelnet 107 Po.
A-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix A Protocol Filters SNMP Unix Multiple xer smux 199 AppleT alk Routing at-rtmp 201 AppleT alk name binding at-nbp 202 AppleT alk echo at-e cho 204 AppleT alk Zone Information at-zis 206 NISO Z39.
B-1 Cisco IOS Software Configuration Guide for Cisco Aironet Access Points OL-29225-01 APPENDIX B Supported MIBs This appendi x lists the Simple Network Manag ement Protocol (SNMP) Management Information Bases (MIBs) that the access point su pports for this soft w are release.
B-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix B Supported MIBs Using FTP to Acce ss the MIB Files • CISCO-MEMOR Y -POOL-MIB • CISCO-PR OCESS-MIB.
C-1 Cisco IOS Software Configuration Guide for Cisco Aironet Access Points OL-29225-01 APPENDIX C Error and Event Messages This appendix lists t he CLI error and e vent message s.
C-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es Conventions Conventions System error messages are displa yed in the fo rmat shown in Ta b l e C - 1 .
C-3 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages Software Auto Upgrade Message s Software Auto Upgrade Messages Error Message SW-AUTO-UPGRADE-2-FATAL_FAILURE: “At tempt to upgrade softw are failed, software on flash may be deleted.
C-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es Software Auto Upgrade Messages Error Message AUTO-INSTALL-4-IP_ADDRESS_DH CP: “The radio is operating in automati c install mode and has set ip address dhcp.
C-5 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages Association Management Message s Association Management Messages Error Message DOT11-3-BADSTATE: “%s %s -> %s.” Explanation 802 .
C-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es Unzip Mess ages Error Message DOT11-4-DIVER_USED: Interf ace $s, Mcs rates.
C-7 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages System Log Messages System Log Messages Error Message %DOT11-4-LOADING_RADIO: Interface [ chars], loading the radio firmware ([chars]) Explanation The radio has been stopped to load ne w firmware.
C-8 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es 802.11 Subsystem Messages 802.11 Subsystem Messages Error Message DOT11-6-FREQ_USED: “Interfa ce %s, frequency %d selected.
C-9 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message DOT11-3-TX_PWR_OUT_OF_RANGE : “Interface %s Radio transmit power out of range.
C-10 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es 802.11 Subsystem Messages Error Message DOT11-6-DFS_SCAN_START: “DF S: Scanning frequency %d MHz for %d seconds.” Explanation The device has be gun its DFS scanning process.
C-11 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message DOT114-NO_MBSSID_BACKUP_VLA N: “Backup VLANs cannot be configured if MBSSID is not enabled.
C-12 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es 802.11 Subsystem Messages Error Message DOT11-2-UPLINK_FAILED: “Upl ink to parent failed: %s.” Explanation The connection to the parent access point f ailed for the di splayed reason.
C-13 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message DOT11-4-MAXRETRIES: “Packet to client %e reached max retries, removing the client.
C-14 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es 802.11 Subsystem Messages Error Message DOT11-4-RADIO_NO_FREQ: “Int erface &s, all frequencies have been blocked, interface not started.
C-15 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message DOT11-4-FLASHING_RADIO: “Interfa ce %s, flashing radio firmware (%s).” Explanation The indic ated interface radio has been stop ped to loa d the indicated new f irmware.
C-16 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es 802.11 Subsystem Messages Error Message DOT11-4-UPLINK_LINK_DOWN: “ Interface %s, parent lost: %s.” Explanation The connection to the parent access point on the indicated interf ace was lost for the reason indicated.
C-17 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message DOT11-6-ANTENNA_GAIN: “Inte rface %s, antenna position/gain changed, adjusting transmitter power.
C-18 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es 802.11 Subsystem Messages Error Message DOT11-4-CKIP_MIC_FAILURE: “CKIP MIC failure was detect ed on a packet (Digest 0x%x) received from %e).
C-19 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages 802.11 Subsystem Messages Error Message DOT11-4-TKIP_REPLAY: “TKIP TSC replay was detected on a packet (TSC 0x%ssx received from %e).
C-20 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es 802.11 Subsystem Messages Error Message SOAP_FIPS-2-INIT_FAILURE: “ SOAP FIPS initialization failure: %s.” Explanation SOAP FIPS i nitialization fa ilure.
C-21 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages Inter-Access Point Protocol Messages Error Message DOT11-6-MCAST_DISCARD: “%s mode multicast packets are discarded in %s multicast mode.
C-22 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es Local Authenticator Messages Error Message RADSRV-4-NAS_KEYMIS: NAS sh ared key mismatch.
C-23 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages Local Authenticator Message s Error Message DPT1X-SHIM-4-PLUMB_KEY_ERR: “Unable to plumb keys - %s.” Explanation An unexpected error occu rred when the shim layer t ried to plumb the k eys.
C-24 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es WDS Messages WDS Messages Error Message WLCCP-WDS-6-REPEATER_STOP: WLCCP WDS on Repe ater unsupported, WDS is disabled. Explanation Repeater access points do not support WD S.
C-25 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages Mini IOS Messages Error Message WLCCP-NM-6-WNM_LINK_UP: Lin k to WNM is up Explanation The network manager is no w responding to k eep-acti ve messages.
C-26 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es Access Point/Bridge Messages Access Point/Bridge Messages Error Message A.
C-27 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages LWAPP Error Messages LWAPP Error Messages Error Message LWAPP-3-CDP: Failure sendin g CDP Update to Controller. Reason “s” Explanation Could not send access point CDP update to controller Recommended Action None.
C-28 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es Sensor Messages Sensor Messages Error Message SENSOR-3-TEMP_CRITICAL: Sys.
C-29 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages SNMP Error Messages Error Message SENSOR-3-VOLT_NORMAL: Syste m sensor “d”(“d”) is now operating under NORMAL voltage Explanation One of the measured en vironmental test points is u nder normal operating voltage.
C-30 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es SSH Error Mess ages Error Message SNMP-4-NOENGINEIDV6: Remote snmpEngineID f or Unrecognized format ‘ %P’ not found when creating user: “s” Explanation An attempt to create a user failed.
C-31 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 Appendix C Error and Event Messages SSH Error Messages Error Message SSH-5-SSH_CLOSE: SSH Sessio n from “%s.
C-32 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 Appendix C Error and Event Messag es SSH Error Mess ages.
GL-1 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 GLOSSARY 802.11 The IEEE standard that specifies carrier sense media access control and physical layer specif ications for 1- and 2- megabi t-per -second (Mbps) wireless LANs operating in the 2.
Glossary GL-2 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 beacon A wireless LAN pa cket that signals the a v ailability and presence of the wireless de vice.
Glossar y GL-3 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 dipole A ty pe of low-gain (2.2-dBi ) antenna consisting of tw o (often internal) elements. domain n ame The text name that refers to a groupi ng of networks or network resources based on org anization-type or geography; for e xample: name.
Glossary GL-4 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 IP subnet mask The number used to identi fy the IP subnetwork, i ndicating whether the IP address can be recognized on the LAN or if it must be reached through a gate way .
Glossar y GL-5 Cisco IOS Software Configuration Gu ide for Cisco Aironet Access Points OL-29225-01 roaming A feature of some Access Points that a llows users to mo ve through a f acility while maintaining an unbrok en connection t o the LAN. RP-TNC A connector type unique to Cisco Aironet rad ios and antennas.
Glossary GL-6 Cisco IOS Software Configuration Gu ide for Cisco Airo net Access Points OL-29225-01 W WDS W ireless Domain Services (WDS). An access point providing WDS on your wireless LAN maintains a cache of credenti als for CCKM-capable client de vices on your wireless LAN.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Cisco Systems 12.4(25d)JA c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Cisco Systems 12.4(25d)JA - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Cisco Systems 12.4(25d)JA, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Cisco Systems 12.4(25d)JA va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Cisco Systems 12.4(25d)JA, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Cisco Systems 12.4(25d)JA.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Cisco Systems 12.4(25d)JA. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Cisco Systems 12.4(25d)JA ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
