Manuel d'utilisation / d'entretien du produit BTS 10200 du fabricant Cisco
Aller à la page of 316
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco BTS 1 020 0 S of tswitc h Dial Plan Guide, Release 4.
THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED.
iii Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 CONTENTS Preface xi Introduction xi Objective xi Audience xi Organization xii Conventi ons xii Updates to this Document for Release 4.
Contents iv Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Trailing Digits Deletion if the Length Matches 1-13 Prefix Digits Function 1-13 Leading Di gits Prefix 1-13 Digits Pref.
Contents v Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 Routing Types 2-2 Basic Subscriber Routing 2-3 Basic Trunk Routing 2-5 Service Provider Routing 2-7 Carrier Based Routi.
Contents vi Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 CHAPTER 3 Dial Plans and Routing 3-1 Introduction 3-1 Originating Basic Call State Machine (CS2 Call Model) 3-2 Cisco B.
Contents vii Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 Signaling System 7 3-15 Session Initiation Protocol 3-16 Generic Address Parameter Based Routing 3-16 Tandem Provisio.
Contents viii Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Routing Types 4-1 Basic Subscriber Routingthe following 4-2 Basic Trunk Routing 4-4 Carrier Based Routing 4-7 Basic D.
Contents ix Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 POP Ea-use = N 4-35 POP ITP = Y 4-35 POP LEC-OSS 4-36 Ported-Office-Code in CA 4-36 Ported-Office-Code in CA = N 4-36 .
Contents x Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Deleting a Dial Plan from the Cisco BTS 10200 So ftswitch Configuration 6-14 Adding Multiple Dial Plans to a Cisco BTS 1.
xi Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 Preface Revised: December 9, 20 08, OL-8001-10 Introduction This document provides detailed routing, translatio n, and dial plan information for th e Cisco BTS 10200 Softswitch.
xii Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Preface Organization This Cisco BTS 1020 0 Dial Plan Guide contain s the follo wing chapters: • Digit T ranslations —The Cisco BTS 10200 Softswitch digit manipulation f unction enables manipulating eith er the digit string, or t he nature of address (NO A), or both.
xiii Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 Preface Obtaining Documentation Cisco provid es sev eral ways to obtain d ocumentat ion, technical assistance, and other technical resources. These sections e xplain ho w to obtain technical information from Cisco Syst ems.
xiv Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Preface Documentation Feedback Y ou can submit comments electronicall y on Cisco.com. On the Cisco Documentation home page, click Feedback at th e top of the page. Y ou can send your comments in e-mail to b ug-doc@cisco.
xv Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 Preface Opening a Technical Assistance Center Case The online T AC Case Open T ool ( http://www .cisco.com/tac/c aseopen ) is the fastest w ay to open se verity 3 (S3) and se verity 4 (S4) cases.
xvi Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Preface Obtaining Additional Publications and Information Information about Cisco products, techno logies, and networ k solutions is av ailable from vario us online and printed sources.
CH A P T E R 1-1 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 1 Digit Translations Revised: December 9, 20 08, OL-8001-10 Introduction Note The Auto Callback (A C)/Auto Redial (AR) feature will not function properly if the dialed digit string is changed or translated during the call routing, s uch as in the table route.
1-2 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Introduction Routing —The Routing is performed in the anal yzed info point in call (PIC). Th e Destination T a ble and/or Route T able can be used to specify digit manipulation of ANI, DNIS or bo th.
1-3 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manipulation Digit Manipulation The follo wing is an ov erview of what th e digman tables pro vide for the Cisco BTS 10200 Softswi tch.
1-4 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manip ulation Match-string rules: • Consist of digits - 0-9, * , #, ^, $, dot(.), qu estion mark (?), Percent (%) or Phrase "none".
1-5 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manipulation Caret (^) Character The caret (^) character is used to specify be ginning of a string. The caret character is used when specific leading digits are to be deleted or re placed.
1-6 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manip ulation Dollar Sign ($) Character The dollar sign ($) character is used to search from the end of st ring backwards in stead of from the beginni ng string.
1-7 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manipulation Dot (.) Character The dot (.) character i s used to indicate strin g position at which match operat ion is to be performed.
1-8 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manip ulation Example 5: Enter 1 to continue translations 1 Enter input string 22233 Match string ^.
1-9 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manipulation Example 3: Enter 1 to continue translations 1 Enter input string 4695551234 Mat.
1-10 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manip ulation Example 2: Enter 1 to continue translations 1 Enter input string 4692551234 M.
1-11 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manipulation Example 2: Enter 1 to continue translations 1 Enter input string 14692551234 Match string ^1.......... Replace string & MATCHED Output string = 14692551234 Example 3: Enter input string 4695551212 Match string ^.
1-12 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manip ulation Leading Digits Deletion The Cisco BTS 10200 Softswitch digit manipulation fun.
1-13 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manipulation Leading Digits Deleti on if the Length Matches The Cisco BTS 10200 Soft switch.
1-14 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manip ulation Digits Prefix if Length Matches The Cisco BTS 10200 Softswitch dig it manipulation function suppo rts the prefi xing of digits only i f length matches per the foll owing example: Add digman id=pfx469if7; match-string=^.
1-15 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manipulation Trailing Digits Replacement The Cisco BTS 10200 Softswitch dig it manipulation.
1-16 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Digit Manip ulation Specific Digits Replacement in a Specific Digit Position The Cisco BTS 10200 .
1-17 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Nature of Address Manipulation Any Input String Replacement The Cisco BTS 10200 Softswitch dig it.
1-18 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Nature of Address Manipulation Nature of Address Route Profile The NO A Route Profile (noa-r oute-prof ile) table i s used to support NO A-based routing on the Cisco BTS 10200 Softswitch.
1-19 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Nature of Address Manipulation Examples show noa-route-profile; add noa-route-profile id=NoaRt; c.
1-20 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Nature of Address Manipulation LIMIT Description: Specif ies the number of ro ws to display on the screen. V a lid only for the sho w command. INTEGER: 1-100000000 ( Default = 100000000) .
1-21 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Nature of Address Manipulation Nature of Address Route The NO A Route (noa-route) table def ines NO A-based routing on the Cisco BTS 10200 Softswitch.
1-22 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Nature of Address Manipulation Usage Guidelines Primary K ey T oken(s): ID, NO A Foreign K ey T oken(s): id, dest-id Syntax Descripti on A UTO_REFRESH Description: Specif ies whether to display cached data on the screen.
1-23 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Nature of Address Manipulation LIMIT Description: Specif ies the number of ro ws to display on the screen. V a lid only for the sh ow command. INTEGER: 1-100000000 ( Default = 100000000) .
1-24 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Nature of Address Manipulation PLA TFORM_ST A TE Description: State of an active or standby sy stem shared memory database; use to audit an acti ve or standby syst em shared memory database.
1-25 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Automatic Numb.
1-26 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation Example 2: In the second example, since the last character of th e input string matches the specif ied match-string (#), the NO A is changed to a VSC.
1-27 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Examples show .
1-28 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation ID Description: Primary k ey . The NO A Route Profile id. V ARCHAR(16) : 1-16 ASCII characters.
1-29 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Digit Manipulation The DIGMAN table is used to perform dig it and NO A manipulation.
1-30 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation Usage Guidelines Primary K ey T oken(s): ID, R ULE Foreign K ey T oken(s): id Add Rules: • digman prof ile id must exis t.
1-31 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation ID Description: Primary k ey . The NO A Route Profile id. V ARCH AR(16): 1-16 ASCI I characters.
1-32 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation MA TCH_NO A Description: Used to match against an input NO A. V ARCH AR(40): 1-40 ASCII characters.
1-33 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation MA TCH_STRING Description: Used to match ag ainst the input-string.
1-34 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation PLA TFORM_ST A TE Description: State of an active or standby sy stem shared memory database; use to audit an acti ve or standby syst em shared memory database.
1-35 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation REPLA CE_NO A Description: If a match on NOA is fo und, the inpu t NO A is replaced with the NO A specified in this token.
1-36 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation REPLA CE_STRING Description: If a match is foun d, the matched string is replaced with the replace-string.
1-37 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Dial Plan Profile The Dial Plan Prof ile (dial-plan-pro file) table creates dial-plan-profile ids before they are assigned to subscribers or tru nk groups.
1-38 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation ANI_DIGMAN_ID Description : Foreign k ey: Digman Prof ile table.
1-39 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation ID Description: Primary k ey . The NO A Route Profile id. V ARCH AR(16): 1-16 ASCI I characters.
1-40 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation N A T_DIAL_PLAN_ID Descript ion: Foreign k ey: Dial Plan table. National dial plan I D to use to retranslate dialed digits.
1-41 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation PLA TFORM_ST A TE Description: State of an active or standby sy stem shared memory database; use to audit an acti ve or standby syst em shared memory database.
1-42 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation International Dial Plan Profile The International Dial Plan Profile (intl-dial-plan-prof ile) table is used to create unique IDs for international di al plans.
1-43 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation DISPLA Y Description: Specif ies what token informat ion to display on the screen.
1-44 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation Translations Stage The Dial-Plan table or Internat ional Dial-Plan table is used during the T ranslations stage t o manipulate only the called party number .
1-45 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Dial Plan Dial plans analyze, screen , and route calls based on dialed digits.
1-46 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation Syntax Descripti on A UTO_REFRESH Description: Specif ies whether to display cached data on the screen.
1-47 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation FORCED Description: Specif ies whether th e system bypasses the parser rules and allo ws a user to enter a dial plan record as a free format record (ASCII).
1-48 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation MIN_DIGITS Description: Minimum number of digits required for a call.
1-49 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation PLA TFORM_ST A TE Description: State of an active or standby sy stem shared memory database; use to audit an acti ve or standby syst em shared memory database.
1-50 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation International Dial Plan The International Dial Plan (i ntl-dial-plan) table h olds international dial plan infor mation for calls to regions ou tside the N ANP .
1-51 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Syntax Descripti on A UTO_REFRESH Description: Specif ies whether to display cached data on the screen.
1-52 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation ID Description: Primar y key . Foreign k ey: International Dial Plan Prof ile table.
1-53 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation ORDER Descrip tion: Spec ifies whether to displa y data on the screen in a sort ed order .
1-54 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation Variable Digi.
1-55 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Note Although .
1-56 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation A CQ_LNP_QUER Y Description: Specif ies whether an LNP Query is required.
1-57 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation CALL_SUBTYPE Description: F oreign ke y: Call T ype table. Specifi es the subcategor y of a call type for dialed digits: call- type plus call-subtyp e.
1-58 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation CLDPTY_CTRL_ REL_AL WD Description: Called party release control allo wed indication.
1-59 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation GAP_R OUTING D.
1-60 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation PLA TFORM_ST A TE Description: State of an active or standby sy stem shared memory database; use to audit an acti ve or standby syst em shared memory database.
1-61 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation SCRIPT_ID Description: F oreign ke y: Script table. Specif ies a script identif ier .
1-62 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation Route The Route (route) t able contains a list of up to t en trunk groups to route a call.
1-63 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Upgrade I mpact: • Set TYPE to R OUTE. • For each entry in R OUTE, add an entry into PO LICY_PR OFILE table.
1-64 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation ANI_DIGMAN_ID4 Descript ion: Fore ign ke y: Digm an Prof ile table.
1-65 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation ANNC_ID Description: Mandatory i f next-action=annc. F oreign key: Announcement table.
1-66 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation CALL_A GENT_ID4 Description: Foreig n key: Call Ag ent table. V alid home Cal l Agent ID for the dialed NP A or NP A-N XX.
1-67 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation DEL_DIGITS1 Description: Number of digits to delete. SMALLINT : 0-16 (Default = 0 ).
1-68 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation DEL_DIGITS6 Description: Number of digits to delete. SMALLINT : 0-16 (Default = 0 ).
1-69 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation DNIS_DIGMAN_ID10 Description: F oreign ke y: Digm an Profile tabl e.
1-70 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation DNIS_DIGMAN_ID7 Description: Foreign ke y: Digman Profile table.
1-71 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation NEXT_A CTION Description: Specifies what action to perform after all trunk grou ps within a route are e xhausted.
1-72 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation PFX_DIGITS3 Descr iption: Digits to be pref ixed for tgn3-id. Digits are pref ixed af ter the number of digits specified ha ve been deleted.
1-73 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation PFX_DIGITS9 Descr iption: Digits to be pref ixed for tgn9-id. Digits are pref ixed af ter the number of digit s specified hav e been deleted .
1-74 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation TG_SELECTION Description: T runk group selection policy . V A RCHAR(3).
1-75 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation TG9 V alid for Command: add, ch ange, audit, sync, sho w Possible V alue: [1_20] Pars er: T extPa rs er TGN1_ID Description: F oreign key: T runk Group table.
1-76 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation TGN5_ID Description: F oreign key: T runk Group table. The f ifth trunk group withi n the route.
1-77 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Trunk Group The T runk Group (trunk-grp) table identif ies the trunk group and maps it to the associated media gateway .
1-78 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation Command T ypes add, audit, change, control, delete, help, show , status, sync Caution Sync is a restricted command and is intended for repa iring data only .
1-79 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Syntax Descripti on AL T_R OUTE_ON_ CONG Description: Specifies whether to use an alternate route when there is traf fic congest ion.
1-80 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation ANI_SCREENING_ PR OFILE_ID Description: Mandatory i f ani-screening=y .
1-81 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation CA USE_CODE_MAP_ ID Descriptio n: Foreign key: Cause Code Map tabl e.
1-82 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation DIAL_PLAN_ID Description: F oreign ke y: Dial Plan table. Specif ies which dial plan ID to use.
1-83 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation EARL Y_BK WD_ MSG_TMR Description: Specif ies the amount of time, in seconds, for the Early Backward Message timer .
1-84 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation LIMIT Description: Specif ies the number of ro ws to display on the screen.
1-85 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation MGCP_PKG_TYPE Description : Determines the MGCP P ackage type for the announcement server .
1-86 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation ORDER Descrip tion: Spec ifies whether to displa y data on the screen in a sort ed order .
1-87 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation POP_ID Description: F o reign ke y: POP table. Defines the num ber of POPs in a Call Agent; used for incoming trunk grou ps.
1-88 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation SEL_POLICY Description: T runk selection poli c y . Control the Ca ll Agent out-of-service, then in-service, after cha nging the sele ction policy .
1-89 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation SEND_RDN_AS_CPN Description: Use when a ca ll is forwarded and call ro uting is to the PSTN where Calling P arty Number Screening is performed.
1-90 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation SP_ID Description: Foreign ke y: Service Provider table. The servi ce provider ID.
1-91 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation TA R G E T _ S TAT E D e s c r i p t i o n : T h e state (activ e or standby) of the Call Agent or Feature Serv er .
1-92 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation TRAFFIC_TYPE Descript ion: Specif ies the type of traf fic car ried ov er this trunk group.
1-93 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Policy NXX The.
1-94 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation Usage Guidelines Primary K ey T oken(s): ID Add Rules: id plus type must e x ist in the Polic y Profile table.
1-95 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation ID Description: Primary k ey . Policy-nxx identif ication field. V ARCHAR(16): 1-16 ASCII characters.
1-96 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation Call Type Profile The Call T ype Profil e (call-type-prof ile) table def ine s the Call T ype properties supported b y the Cisco BTS 10200 Softswitch.
1-97 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation Command T ypes add, audit, change, de lete, help, show , sync Caution Sync is a restricted command and is intended for repa iring data only .
1-98 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Nu mber Identification Se rvice Manipulation DISPLA Y Description: Speci fies what tok en information to display on the screen.
1-99 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Automatic Number Identification/Dialed Number Identifi cation Service Manipulation PLA TFORM_ST A TE Description: State of an active or standby sy stem shared memory database; use to audit an acti ve or standby syst em shared memory database.
1-100 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 1 Digit Translations Sample Provisioning Sample Provisioning This section pro vides a sample provisioning script for the implementation of the dig man functionality . Figur e 1 -3 Sample Pro visioning Caller A, using dial -plan-id=cdp20, dials 800765 4321.
CH A P T E R 2-1 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 2 Routing Revised: December 9, 20 08, OL-8001-10 Introduction This chapter pro vides a basic understanding of th e Cisco BTS 10200 So ftswitch routing types and an explanat ion of all routing types and e xplanation of ho w they function.
2-2 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Routing Types For call rout ing to occur there i s some basic info rmation ne eded to process the call route. That information is o btained from either t he subscriber table or the trunk g roup table.
2-3 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es Basic Subscriber Routing This section prov ides a detailed description of the Cisco BTS 10200 So ftswitch basic subscriber routing.
2-4 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Figur e 2-1 Basic Subscr iber Routing Yes Yes 143815 No Yes No No Yes No Subscriber Incoming C.
2-5 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es Basic Trunk Routing This section pro vides a detailed description of the Cisco BTS 10200 Softswit ch basic trunk routing.
2-6 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Figur e 2-2 Basic T r unk Routing Yes No 143816 No Yes No Yes No CALL TYPE T OLLFREE 900 500 D.
2-7 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es Service Provider Routing This section provides a detailed de scription of the Cisco BTS 10200 Softswi tch service provi der routing.
2-8 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Carrier Based Routing This section pro vides a detailed description of the Cisco BTS 10200 Softswit ch carrier based routing.
2-9 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es Figure 2-4 Car ri er Based Routing No No 143818 Ye s No Ye s Carrier_Routing (CARRIER) CARRIER.
2-10 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Basic Dial Plan Routing This section pro vides a detailed description of the Cisco BTS 1020 0 Softswitch basic dial pl an routing.
2-11 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es Figur e 2-5 Basic Di al Plan Routing No No CALL TYPE T OLLFREE 900 500 143819 Ye s No Ye s DP.
2-12 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Automatic Number Identification Based Routing This section pro vides a detailed description of the Cisco BTS 10200 Soft switch ANI based routing.
2-13 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es Nature of Address Routing NO A routing is used to select separate dial plans for DN and RN. The ISUP IAM CdPN parameter contains a NO A v alue. The NOA v alu e distinguishes the format of t he digits, i.
2-14 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Query Types The Cisco BTS 10200 Softsw itch performs queries of it s internal database in order to route a call. It may also be configured to perform queries for an other backward switch t hat is not capable of LNP qu eries.
2-15 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es Intermediate or Donor Switch Performs ACQ for Another Switch or Netwo rk The Cisco BTS 1020 0 Softswitch may be required t o perform A CQ for another switch that does not ha ve that capability .
2-16 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types ACQ Matrix T able 2-1 and Ta b l e 2 - 2 illustrate which t oken combinations result i n a query . In general, a query must be allo wed at all applicable le vels for a quer y to be performed.
2-17 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es YN X N YN X N YN X N YN X N YN XN NY X N NY X N NY X N NY X N NY - - - X N NN X N NN X N NN X.
2-18 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Query On Release (QOR) For Query on Release (QOR), illustrated i n Figure 1, calls are rout ed normally , with no LNP query , until a call is receiv ed for a ported-out subscriber at the donor switch.
2-19 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es Donor Switch • Normal case—When the B TS receiv es a call to a DN w ith a DN2subscriber r.
2-20 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Intermediate or Donor Sw itch Performing QoR for A nother Switch or Network For QoR, the LNP .
2-21 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es Subscriber Based LNP Tr igger on a Donor Switch The LNP-TRIGGER token in the DN2subscriber table is an alternative to po rting b y changing the DN2subscriber ST A TUS token to POR TED-OUT .
2-22 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Figur e 2-1 0 Bef or e Subscr iber P ortin g 1. The originating switch sends an IAM to the donor switch with NO A=3 and DN=70348410 00. 2. In the DN2subscriber table on the dono r sw itch, ST A TUS=ASSIGNED and LNP-TRIGGER=Y .
2-23 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es Figure 2-1 1 After Subscr iber Por t ing 1. The originating switch sends an IAM to the donor switch with NO A=3 and DN=70348410 00. 2. In the DN2subscriber table on the donor sw itch, ST A TUS=ASSIGNED and LNP-TRIGGER=Y .
2-24 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Precedence of Query Types Operators can choose dif ferent options among A CQ, OD BR, QoR, or a combination o f these. Countries starting with only ODBR or QoR may ev entually transition to A CQ as more numbers become ported.
2-25 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es Note 1: case A: Donor switch dn2subscriber LNP-TR IGGER=Y and dn2subscriber STATUS=PORTED-OUT with ONWARD-CALL-ROUTING=Y: ODBR query.
2-26 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Routing Types Routing Number Routing for Called Party Number Wit h Ported Nature of Number and Routi ng Number + Directory Numb er An incoming tru nk call is re cei ved wit h the Called Party Nu mber containi ng the NO A associated with a ported DN.
2-27 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Routing Typ es There is no change to CALL TYPE_INTERLLA T A , CALL TYPE_TOLL, and CALL TYPE_INTL. The CALL TYPE_INTL_WZ1 has two dif ferent flav ors of pref erred carrier routing con trolled by th e CA-CONFIG:INTL_WZ1_PIC3 flag.
2-28 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Call Types Note Enhanced preferred routing affects the entire system for CALL TYPE IN TL_WZ1 routing. All subscriber originated CALL TYP E INTL_WZ1 calls us e preferred carrier routing.
2-29 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Call Types 1+ Interlata Call This section pro vides a detailed description of the Cisco BTS 10200 Soft switch routing and call flo w for 1+ interlata calls.
2-30 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Call Types 1+ Intralata Call This section pro vides a detailed description of the Cisco BTS 10200 Soft switch routing and call flo w for 1+ intra lata calls.
2-31 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Call Types Figure 2-13 1+ Intralata Call No No No No No No No Ye s Route based on CA C 1+ intraLA T A call 1.
2-32 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Call Types 0+ Interlata Call This section pro vides a detailed description of the Cisco BTS 10200 Soft switch routing and call flo w for 0+ inter lata calls.
2-33 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Call Types 0+ Intralata Call This section pro vides a detailed description of the Cisco BTS 10200 Soft switch routing and call flo w for 0+ intral ata calls.
2-34 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Call Types Figure 2-15 0+ Intralata Call No No No No No No No 1+ intraLA T A call 101XXXX dialed Check Subs.
2-35 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Call Types Ported-In Call Processing This section pro vides a detailed description of the Cisco BTS 10200 Soft switch routing and call flo w for ported-in call processing calls.
2-36 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Call Types Figur e 2-16 P orted-In Call Processi ng Call-Type After Multiple Digit Translations Normally after a digit transl ation, the call-type is retrie ved from the resulting Destination.
2-37 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Call Types Operator Services The Operator Services feature allows routing of op erator calls to a Feature Group D Operator T runk (FGD OS) using the CAS MF Operator Package (M O).
2-38 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Call Types Note These calls can be terminated to anoth er type of trunk group such as ISDN , SS7, and SIP , but in these cases the calls are trea ted as re gular call s.
2-39 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing Policy Based Flexible Routing The Cisco BTS 10200 Softswitch pol icy based fle xible routing use policy based routi ng tree decisions to select the call route and to route the call.
2-40 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing Each of the following policies are described: • Policy Day of Y ea r , Day.
2-41 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing Syntax Descripti on A UTO_REFRESH Description: Specif ies whether to display cached data on the screen. V alid only for the sh ow command.
2-42 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing DISPLA Y Description: Speci fies what tok en information to display on the screen. V alid only for the sho w command. V A RCHAR(1024): 1-1024 (Def ault = all tokens are displayed).
2-43 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing DO Y1_POLICY_TYPE Description: F oreign key: do yn -polic y-type plus the do y n-polic y-id to Policy Prof ile table. Points to the ne xt policy type table to be used in the sequence.
2-44 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing DO Y10_POLICY_ TYPE Description: Se e DO Y1-POLICY -TYPE.
2-45 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing DO Y4 Description: Month and day (day of year pro visioning).
2-46 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing DO Y6_POLICY_ID Description: See DO Y1-POLICY -ID.
2-47 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing DO Y8_POLICY_TYPE Description : See DO Y1-POLICY -TYPE.
2-48 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing MASTER V alid for Command: sync Mandatory: sync Possible V alue: [1_10] Pars er: T extPa rs er ORDER Descrip tion: Spec ifies whether to displa y data on the screen in a sort ed order .
2-49 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing POLICY_ID2 Description: ID of the Polic y or Route table that matches the policy type. Indexes the ID to the t ype. V ARCHAR(16): 1-16 ASCII characters.
2-50 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing POLICY_ID8 Description: ID of the Polic y or Route table that matches the policy type. Indexes the ID to the type. V ARCHAR(16): 1-16 ASCII characters.
2-51 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing POLICY_TYPE3 Description: See POLICY -TYPE1.
2-52 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing POLICY_TYPE9 Description: See POLICY -TYPE1.
2-53 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing ST AR T_DO W4 D escription: See ST AR T -DOW1. V alid for Command: add, chan ge, audit, sync, sho w Possible V alue: SUN, MON, TUE, WED, THU, FRI, SA T Pars er: T extPa rs er ST AR T_DO W5 D escription: See ST AR T -DOW1.
2-54 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing ST AR T_TIME10 Description : The time in hours and minutes (24-hour clock) that th is policy starts (time of day pro visioning).
2-55 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing ST AR T_TIME7 Description: The time in hours and min utes (24-hour clock) that this polic y starts (time of day pro visioning). CHAR(5): HH:MM.
2-56 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing STOP_DO W10 Description: See ST OP-DO W1. V alid for Command: add, chan ge, audit, sync, sho w Possible V alue: SUN, MON, TUE, WED, THU, FRI, SA T Pars er: T extPa rs er STOP_DO W2 Description: See STOP-DO W 1.
2-57 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing STOP_TI ME1 Description: The time in hours and minut es (24-hour clock) that this polic y ends (time of day pro visioning).
2-58 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing STOP_TI ME6 Description: The time in hours and min utes (24-hour clock) that this polic y ends (time of day pro visioning).
2-59 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing Policy Origin Dependent Routing The Policy Ori gin Dependent Routing enables the fle xible routing of calls via the Cisco BTS 1 0200 Softswitch by t he use of origin dependent routi ng (ODR).
2-60 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing Syntax Descripti on A UTO_REFRESH Description: Specif ies whether to display cached data on the screen. V alid only for the sho w command.
2-61 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing MASTER V alid for Command: sync Mandatory: sync Possible V alue: [1_10] Pars er: T extPa rs er ORDER Descrip tion: Spec ifies whether to displa y data on the screen in a sort ed order .
2-62 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing POLICY_TYPE Description: Points to the nex t policy type tab le to use in the sequence. Policy routing continues until p olicy-typ e=route or polic y-nxx is reached.
2-63 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing Policy Originating Line Information The Policy Or iginating Line Information enab les the flexible ro uting of calls via the Cisco BTS 10200 Softswitch b y the use of originating lin e information (OLI).
2-64 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing Syntax Descripti on A UTO_REFRESH Description: Specif ies whether to display cached data on the screen. V alid only for the sho w command.
2-65 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing OLI Description: Primary k ey .
2-66 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing POLICY_TYPE Description: Points to the nex t policy type tab le to use in the sequence. Policy routing continues until p olicy-typ e=route or polic y-nxx is reached.
2-67 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing Policy NXX The Policy NXX enables the fle xible routing of calls via th e Cisco BTS 10200 Softswitch when a number services call results in a tran slated number , carrier ID, translated numb er and a carrier ID, or a route ID.
2-68 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing Syntax Descripti on A UTO_REFRESH Description: Specif ies whether to display cached data on the screen. V alid only for the sho w command.
2-69 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing MASTER V alid for Command: sync Mandatory: sync Possible V alue: [1_10] Pars er: T extPa rs er ORDER Descrip tion: Spec ifies whether to displa y data on the screen in a sort ed order .
2-70 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing Policy Percent The Policy Percen t enables the flexibl e routing of calls via the Cisco BTS 10 200 Softswitch based on percent allocation.
2-71 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing Usage Guidelines Primary K ey T oken(s): ID Add Rules: polic y-id exists in policy-<poli cy-type>::id if entered. Change Rules: polic y-id exists in policy-<polic y-type>::id if entered.
2-72 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing BEGIN_RAN GE3 Descri ption: Defines the beginnin g percent range (b eginning and endi ng percents) for the third destination. SMALLINT : 1-100.
2-73 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing DEF A UL T_POLICY_ TYPE Description: Point s to the default pol icy type to u se if the ne xt route is not found in the Polic y table.
2-74 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing END_RANGE2 Description: Defines t he end of the percent range (be ginning and ending percents) for the s econd destination. SMALLINT : 1-100.
2-75 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing MASTER V alid for Command: sync Mandatory: sync Possible V alue: [1_10] Pars er: T extPa rs er ORDER Descrip tion: Spec ifies whether to displa y data on the screen in a sort ed order .
2-76 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing POLICY_ID3 Description: See polic y-id1. V ARCHAR(16): 1-16 ASCII characters. V alid for Command: add, chan ge, audit, sync, sho w Possible V alue: [1_16] Pars er: T extPa rs er POLICY_ID4 Description: See polic y-id1.
2-77 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing POLICY_TYPE1 Description: Points to the n ext poli cy type tabl e to be used in the sequence. Policy r outing continues unt il policy- type=route or Polic y -nxx is reached.
2-78 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing POLICY_TYPE4 Description: See policy -type1.
2-79 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing Policy Point of Presence The Policy Point of Presence enable s the fle xible routing of calls via the Cisco BTS 1 0200 Softswitch based on the po int of presence (POP).
2-80 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing Syntax Descripti on A UTO_REFRESH Description: Specif ies whether to display cached data on the screen. V alid only for the sho w command.
2-81 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing ORDER Descrip tion: Spec ifies whether to displa y data on the screen in a sort ed order . V alid only for the sho w command. V A RCHAR(1024): 1-1 024 (Default = all ro ws are displayed).
2-82 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing POLICY_TYPE Description: Points to the nex t policy type tab le to use in the sequence. Policy routing continues until p olicy-typ e=route or polic y-nxx is reached.
2-83 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing Policy Prefix The Policy Pref ix enables the flexib le routing of calls via t he Cisco BTS 10200 Softswi tch based on pref ix (type of call).
2-84 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing Usage Guidelines Primary K ey T oken(s): ID Foreign K ey T oken(s): policy-ty pe n plus polic y-id n Add Rules: polic y-id exists in policy-<poli cy-type>::id if entered.
2-85 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing DEF A UL T_POLICY_ TYPE Description: Point s to the default pol icy type to u se if the ne xt route is not found in the Polic y table.
2-86 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing LIMIT Description: Specif ies the number of ro ws to display on the screen. V alid only for the sho w command. INTEGER: 1-100000000 ( Default = 100000000) .
2-87 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing POLICY_ID10 Description: See policy -id1. V ARCHAR(16): 1-16 ASCII characters. V alid for Command: add, chan ge, audit, sync, sho w Possible V alue: [1_16] Pars er: T extPa rs er POLICY_ID2 Description: See polic y-id1.
2-88 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing POLICY_ID8 Description: See polic y-id1. V ARCHAR(16): 1-16 ASCII characters. V alid for Command: add, chan ge, audit, sync, sho w Possible V alue: [1_16] Pars er: T extPa rs er POLICY_ID9 Description: See polic y-id1.
2-89 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing POLICY_TYPE1 Description: Foreig n key : Policy-type n plus the policy-id n to the Polic y Profi le table. Points to the ne xt policy type table to be used i n the sequence.
2-90 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing POLICY_TYPE2 Description: See policy -type1.
2-91 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing POLICY_TYPE8 Description: See policy -type1.
2-92 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing PREFIX3 D escription: See prefix1.
2-93 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing Region Profile The Regio n Profile (r egion-prof ile) table groups North American Numbering Plan (N ANP) digits to an originating re gion.
2-94 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing Examples show region-profile id=e911; digit-string=210-470; add region-profi.
2-95 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing ID Description: Primar y key . Unique identif ier for this policy-tod. Assigned b y service provider . V ARCHAR(16): 1-16 ASCII characters.
2-96 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing Policy Region The Policy Re gion enables the flexible routing o f calls via the Cisco BTS 10200 Softsw itch based on the call regio n.
2-97 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing Examples show policy-region id=ca200; region=sanantonio; add policy-region id=.
2-98 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing ID Description: Primar y key . Unique identif ier for this policy-tod. Assigned b y service provider . V ARCHAR(16): 1-16 ASCII characters.
2-99 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routing Policy Based Flexible Routing POLICY_ID Description: ID of the Polic y or Route table that matches the polic y type. Indexes the ID to the t ype. V ARCHAR(16): 1-16 ASCII characters.
2-100 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 2 Routin g Policy Based Flex ible Routing REGION Description: Primary k ey . Region is d eriv ed from the Region Prof ile table based on the ANI. If the re gion cannot be deriv e d from the region-pr ofile, use the regio n assigned to the incoming tr unk group.
CH A P T E R 3-1 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 3 Dial Plans and Routing Revised: December 9, 20 08, OL-8001-10 Introduction This chapter pro vides detailed dial plan and routing in formation for the Cisco BTS 1 0200 Softswitch.
3-2 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Originating Basic Call State Machine (CS2 Call Model) Originating Basic Call State Machine (CS2 Call Model) This section pro v ides detailed information on th e pa rtial orig inating b asic call state m achine (OB CSM).
3-3 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Originating Basic Call Stat e Machine (CS2 Call Model) Figur e 3-1 O r iginating Basic Call St.
3-4 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Cisco BTS 10200 Softswitch Feature Server Strategy Cisco BTS 10200 Softswitch Feature Server Strategy Figure 3-2 p rovides an illustrated example of the Cisco BTS 10 200 Softswitch feature service strat egy .
3-5 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Point of Presence Point of Presence Figure 3-3 p rovides an ill ustrated example of th e Cisco BTS 10200 Softswitch ability to process and route calls between multiple po ints of presence (POPs).
3-6 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Network Configuration Network Configuration Figure 3-4 pro v ides an illustrat ed example of a typical Cisc o BTS 10200 Softswi tch network configuration.
3-7 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Subscriber Types Individual Indi vidual is the Cisco BTS 10200 Softswitch def ault subscriber type. The indi vidual subscriber ty pe is assigned to indi vidual subscribers.
3-8 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Digit Collection Digit Collection The Digit Map (digit-map) t able tells a media g ate way (MGW) ho w to collect and report dialed digit s.
3-9 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Digit Collection Caution The Cisco BTS 2200 does not ch eck the syntax for digit maps . Therefore, before you deploy a ne w or modif ied digit-map table, ensure that you f irst test its operability in a non-produ ction en vironment.
3-10 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Dial Plans Dial Plans The follo wing topics are discussed in this section: • National Di al.
3-11 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Digit Analysis • Local Serving Area.
3-12 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Digit Analy sis Destination This section contains related th e placed call destination d etermination.
3-13 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Class of Service Scre ening Class of Service Screening Class of service (COS) screening allows subscribers, or a group of subscribers, to ha ve dif ferent collections of privile g es and features assigned to them.
3-14 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Routing Ported Office Code The Ported Off ice Code (ported-off i ce-code) table specif ies numbers, or ranges of number s, that might hav e been ported-in to this switch.
3-15 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Trunk Group Types Trunk Group Types The Cisco BTS 10200 Softswitch supports the follo wing tr.
3-16 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Generic Address Parameter Ba sed Routing Session Initiation Protocol The Softswitch (SIP) T r.
3-17 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Tandem Provisioning Tandem Provisioning This section pro vides general information on tande m pro visioning.
3-18 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Tandem Provisioning Cause Code Map The Cause Code Map (cause-code-map) table pro ces ses cause codes received from an outgoing interface, and also when sending cause codes to a pr evious switch o ver an incoming interf ace.
3-19 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Tandem Provisioning H.323 Trunk Group Profile The H.323 T runk Group Profile (h323-t g-profile) tabl e defines the characteristics of each H.32 3 trunk.
3-20 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Local Toll-Free Servic e Provisioning Trunk Group Feature Data The T runk Group Feature Data (trunk -grp-feature-data) table performs COS screening for T andem calls.
3-21 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Local Toll-Free Service Provisioning Local Toll-Free Database The Cisco BTS 10200 Softswitch pro vides the ability to translate inbound/outbo und 8XX numbers at the Feature Server (FS) using a local 8XX database.
3-22 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Carriers/Service Providers DN2 Customer Group The DN2 Customer Group (d n2cust-grp) table pro vides translation of inb ound/outbound 8XX (t oll free) numbers to a local number and designated carrier .
3-23 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Carrier Ba sed Routing Circuit Code The Circuit Code (circuit-co de) table def ines the ci rcuit code v alue for the transit network selection (TNS) parameter .
3-24 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 3 Dial Plans and Routing Call Processing Flow Subscriber Termination The subscriber termin ation call flow is: • T e.
CH A P T E R 4-1 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 4 Command Line Interface Routing Revised: December 9, 20 08, OL-8001-10 Introduction This chapter pro vides a basic understanding of ho w the Cisco BTS 10200 Softsw itch Command Line Interface (CLI) functions wi th of t he routing types and call types.
4-2 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Routing Types Basic Subscriber Routingthe following This section prov ides a detailed description of the Ci sco BTS 10200 Softswitch basic subscriber routing and provides CLI exampl e references.
4-3 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Routing Typ es Figur e 4-1 Basic Subscr iber Routing Ye s 143833 No No Ye s Ye s Subsc.
4-4 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Routing Types Basic Trunk Routing This section pro vides a detailed description of the Cisco BTS 10200 Softswitch basic trunk ro uting and provides CLI e xample references.
4-5 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Routing Typ es Step 9 If the call type is TNS, the Cisco BTS 10200 Softswitc h will use the carrier routing to select the call route and to select the call route a nd to route the cal l.
4-6 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Routing Types Figur e 4-2 Basic T r unk Routing Ye s 143834 No No CALL TYPE T OLLFREE .
4-7 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Routing Typ es Carrier Based Routing This section pro vides a detailed description of the Cisco BTS 10200 Softswitch carrier based rout ing and provides CLI e xample references.
4-8 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Routing Types Step 9 If the R TM_CP_CARRIER_2_LECOSS is av ailable and if the traf fic i s not toll traf fic, t he Cisco BTS 10200 Softswit ch will use the R TM_CP_CARRIER_2_LECOSS to select the call rout e and to route the call.
4-9 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Routing Typ es Basic Dial Plan Routing This section pro vides a detailed description of th e Cisco BTS 10200 Softsw itch basic dial plan routing and provides CLI e xample references.
4-10 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Routing Types Figur e 4-4 Basic Di al Plan Routing No 143836 No No CALL TYPE T OLLFRE.
4-11 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Call Types Call Types This section pro vides detailed information on the CLI usage for the Cisco BTS 10 200 Softswitch call types.
4-12 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Call Types Step 5 Determine if a local ex change carrier operations supp ort system (LECOSS) is def ined in the POP table.
4-13 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Call Types 1+ Intralata Call This section pro vides a detailed description of the Cisco BTS 10200 Soft switch routing and call flo w for 1+ intralata calls and provides CLI example references.
4-14 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Call Types c. Determine if a LECOSS is def ined in the POP table. If a LECOSS is defined in the POP table, the Cisco BTS 10200 Softswitch will select the call route and route the call via the LECOSS.
4-15 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Call Types 0+ Interlata Call This section pro vides a detailed description of the Cisco BTS 10200 Soft switch routing and call flo w for 0+ interlata calls and provides CL I example references.
4-16 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Call Types Figure 4-7 0+ Inter lata Call 0+ Intralata Call This section pro vides a detailed description of the Cisco BTS 10200 Soft switch routing and call flo w for 0+ intralata calls and provides CLI example references.
4-17 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Call Types Step 4 Check the POP table for a def ined LECOSS. If a LEC OSS is def ined in the POP table, the Cisco BTS 10200 Softsw itch will route the call via the LECOSS.
4-18 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Call Types Figur e 4-8 0+ Intralata Call Ported-In Call Processing This section pro v.
4-19 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Call Types Step 4 Determine if the in-call agent flag is set .
4-20 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Call Types Figur e 4-9 Por ted-In Call Pr ocessing No No No No Ye s Ye s 143841 Offic.
4-21 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Command Line Interface Routing Examples This section provides CLI routing examples .
4-22 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples • Sub DP Dest Intralata • Subscriber T es.
4-23 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Carrier All = N The Carrier All = N CLI example is used in the Carrier Bas ed Routing routin g examples.
4-24 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Carrier Intra = Y The Carrier Intra = Y CLI ex ample is used in the 1+ Intralata Call and 0+ Intralata Call routing examples.
4-25 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Carrier Use Dial-Plan “Y” The Carrier Use Dial-Plan “Y” CLI example is used in the Carrier Base d Routing routin g example.
4-26 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Destination Interlata The Destination Interlata CL I example is used in the 1+ Interlata Call routing example.
4-27 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Destination SUB The Destination SUB CLI example is used in the Basic Dial Plan Routing routing example.
4-28 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Dial-Plan “dp50” The Dial-Plan “dp50” CLI example is used in the Basic Subscriber Routingthe follo wing routing exa mpl e.
4-29 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples DN2sub The DN2sub CLI e xample is used in the Basic S ubscriber Routingthe follo wing and Ported-In Call Processing routing examples.
4-30 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Dp50 Digit-String = 202 The Dp50 Digit-String = 202 CLI e xample is used in the 1+ Interlata Call routing example.
4-31 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples In DN2Sub The In DN2Sub CLI example is used in the Ported-In Call Processing routin g examples.
4-32 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples LNP Route The LNP Route CLI example is used in the Ported-In Call Processing routing e xamples.
4-33 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Not in DN2Sub The Not in DN2Sub CLI example is used in the Ported-In Call Processing routing e x amples.
4-34 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples POP 50 No Block The POP 50 No Block CLI example is used in the 1+ Interlata Call routing e xample.
4-35 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples POP Block-ea = Y The POP Block-ea = Y CLI example is used in the 0+ Interlata Call routing e xample.
4-36 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples POP LEC-OSS The POP LEC-OSS CLI example i s used in the 1+ Interlata Call , 1+ Intralata Ca ll , 0+ Interlata Call , and 0+ Intralata Call routing examples.
4-37 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Service Provider The Service Provider CLI example is used in the Carrier Ba sed Routing rou ting exam ple.
4-38 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Sub DP Dest Intralata The Sub DP Dest Intralata CLI example is used in the 1+ Intralata Call and 0+ Intralata Call routing exa mpl es .
4-39 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Subscriber Test1 The Subscriber T est1 CLI ex.
4-40 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Subsciber and Sub-Profile The Subsciber and Sub-Profile CLI e xample is used in the Basic Subscriber Routingthe following and 1+ Interlata Call routing e xamples.
4-41 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples Trunk-grp 6969 The T runk-grp 6969 CLI example i s used in the Basic T runk Routing routing exampl e.
4-42 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 4 Command Line Interface Routing Command Line Interface Routing Examples.
CH A P T E R 5-1 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 5 Preparing for Dial Plan Provisioning Revised: December 9, 20 08, OL-8001-10 Introduction This chapter describes the prerequisit e tasks you need to perform before you can b egin pro visioning a dial plan.
5-2 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 5 Prepa ring for Dial Plan Provision ing Provisioning Prer equisites Prerequisite Tasks The follo wing steps describe the tasks you should perform prior to using t his dial plan guide.
5-3 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 5 Preparing for Dial Plan Provisioning Provisioning Tools Provisioning Tools The Cisco BTS 10200 Softswitch inclu des t.
5-4 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 5 Prepa ring for Dial Plan Provision ing Creating a Dial Plan Extensible Provisioning and Operations Manager The EPOM visual interface can be used t o provision and depl oy dial plans for the Cisco BTS 10200 Softswitch.
5-5 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 5 Preparing for Dial Plan Provisioning Creating a Dial Plan Cisco BTS 10200 Softswitch Provisioning Sequence The order in which you pro vision dial plan tables is important.
5-6 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 5 Prepa ring for Dial Plan Provision ing Creating a Dial Plan.
CH A P T E R 6-1 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 6 Provisioning Dial Plans Revised: December 9, 20 08, OL-8001-10 Introduction This chapter pro vides detailed inst.
6-2 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan w ith the Command Line Interface Dial Plan Profile The Dial Plan Prof ile (dial-plan-pro file) table creates dial-plan-profile ids before they are assigned to subscribers or tru nk groups.
6-3 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan wi th the Command Line Inte rface Usage Guidelines Primary K ey T ok.
6-4 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan w ith the Command Line Interface FN AME Description: Primary ke y . Foreign ke y: Feature table. T ype of screening feature.
6-5 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan wi th the Command Line Inte rface ORDER D escription: Specif ies whether to display data on t he screen in a sorted order .
6-6 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan w ith the Command Line Interface Custom Dial Plan Profile The Custom Dial Plan Profile (custom-dial-plan-profile) table defines custom dial pl an IDs (CDP IDs) assigned to Centre x groups.
6-7 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan wi th the Command Line Inte rface DISPLA Y Description: Specif ies what token informati on to display on the screen. V alid only for the sho w command.
6-8 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan w ith the Command Line Interface PLA TFORM_ST A TE Description: State of an active or standby sy stem shared memory database; use to audit an acti ve or standby syst em shared memory database.
6-9 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan with the Extensible Provisioni ng and Operations Mana ger Provisioni.
6-10 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan with the Extensible Provision ing and Operations Manag er The Cisco BTS 10200 Softswitch Component windo w opens showing a l ist of dial plans.
6-11 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan with the Extensible Provisioni ng and Operations Mana ger Y ou return to the Cisco BTS 1 0200 Softswit ch Component windo w .
6-12 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan with the Extensible Provision ing and Operations Manag er Step 5 Select a template from the list. Step 6 Click Load . Click OK or A pply .
6-13 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan with the Extensible Provisioni ng and Operations Mana ger Note The .
6-14 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan with the Extensible Provision ing and Operations Manag er Note EPOM provides opti on to edit multiple noun s in a single instance.
6-15 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan with the Extensible Provisioni ng and Operations Mana ger Note The .
6-16 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan with the Extensible Provision ing and Operations Manag er • When you click A pply , the component i s added, bu t you remain in t he Add component windo w for further operations.
6-17 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan with the Extensible Provisioni ng and Operations Mana ger Step 3 Click Delete . The Delete component win dow appears with the requ ested deleti ons.
6-18 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 Chapter 6 Provisioning Dial Plans Provisioning a Dial Plan with the Extensible Provision ing and Operations Manag er.
GL-1 Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 GLOSSARY Revised: December 9, 2008, OL-8001-10 A ABBR abbre viated ACQ all calls query ADDR address AIN Advan ced Intelligent.
Glossary GL-2 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 C CA California CA call agent CAC carrier access code CAP competiti ve access pro vider CAS channel as sociated signa.
Glossar y GL-3 Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 D DA directory assistance DBM database management DDD direct distance o r domestic dialing DEL delete DEST destinat.
Glossary GL-4 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 F FA faul ty FA-RB faulty remotely b locked FAS facility associated signaling FGD Feature Group D FS Feature Server G.
Glossar y GL-5 Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 ITU International T elecommunication Union IVR interactiv e voice response J K L LATA local access transport area L.
Glossary GL-6 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 MO MF operator trunk MRU most recently used MS CAS MF endpoints MSG message MT MF terminating trunk N NA not applicab.
Glossar y GL-7 Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 NTWK network NUM number O OBCSM originating basic call state machine OCN original called number ODD odd-number ed O.
Glossary GL-8 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 R RACF remote acti vation of call forw arding RAND random RDN Redirecting Number Information Element REL release RID .
Glossar y GL-9 Cisco BTS 10200 Softswitch Dial Plan Gui de, Release 4.5.x OL-8001-10 T TAC T echnical A ssistance Center TBCSM terminating basic call system manager TCL tool comm and lang uage TDM tel.
Glossary GL-10 Cisco BTS 10200 Softswitch Dial Plan Guide, Release 4.5.x OL-8001-10 X Y Z.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Cisco BTS 10200 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Cisco BTS 10200 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Cisco BTS 10200, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Cisco BTS 10200 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Cisco BTS 10200, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Cisco BTS 10200.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Cisco BTS 10200. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Cisco BTS 10200 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
