Manuel d'utilisation / d'entretien du produit MDS-6 du fabricant Channel Plus
Aller à la page of 22
Six-Source Six-Zone Music Distribution Amplifier The MDS-6 is a six source, six zone music distribution amplifier that will fill your home with the highest quality music of any system being built today. It offers unparalleled features in a price range that is very affordable.
TM THIS APP ARA TUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING. NO OBJECTS FILLED WITH LIQUIDS SUCH AS V ASES SHALL BE PLACED ON THE APP ARA TUS. TO AVOID ELECTRICAL SHOCK, DO NOT DISASSEMBLE. REFER SERVICING TO QUALIFIED PERSONAL ONL Y! Multiplex Technology Inc.
.
Page 1 B C TM 120V 50/60Hz 300W Multiplex Technology Inc. MADE IN CHINA DESIGNED IN USA MODEL MDS-6 MULTI-ZONE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
ZONE 1 L R LEFT - + RIGHT - + ZONE 2 LR LEFT - + RIGHT - + ZONE 3 LR LEFT - + RIGHT - + ZONE 4 LR LEFT - + RIGHT - + ZONE 5 LR LEFT - + RIGHT - + ZONE 6 LR LEFT - + RIGHT - + LINE OUT / SPEAKER OUT 20W/8 OHM X2 20W/8 OHM X2 20W/8 OHM X2 20W/8 OHM X2 20W/8 OHM X2 20W/8 OHM X2 LINE OUT LINE OUT LINE OUT LINE OUT LINE OUT LINE OUT 1.
ZONE CONTROLLERS 1 8 OUT 1 8 1 8 1 8 1 8 1 8 1 8 1 8 I N 123456 MASTER INDIVIDUAL ZONES CONTROLLER SECTION 7.) Master Output - This connector allows the party mode to apply to multiple units if additional units are added. 8.) Master Input - This is for the party mode controller.
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR. WARNING: SHOCK HAZARD - DO NOT OPEN. IR REMOTE OUTPUTS 1 SOURCE OUTPUT SUM OUTPUT A 2 B 3 C 4 D INFRARED (IR) SECTION 16.) Source Output #1 through 4 - This 1/8 2 conductor jack is for the IR emitters and are locked source specific.
MDS-6 INSTALLATION MANUAL TM.
Page 1 MDS-6 Installation Manual Recommended Cables: Category-5 or Category-3 (4 twisted pair stranded), shielded or unshielded. 16-4 or (2) 16-2 speaker cables. To keep the installation process as simple as possible for first time users, please follow these simple steps.
Master In/Out: The master controller input will accept a seventh MCS-1 controller. This controller will then become a master control for the entire system. If Source 1 is selected on this controller, all zones will switch to Source 1. If volume up is pressed, all zones will go up and visa versa volume down will lower all zones.
Page 3 IR Emitter Modulation Frequency - these are factory set to give optimum preformance of the emitters. Factory setting is 40KHz. Range is 32 KHz full CCW to 65 KHz full CW. Doorbell Level - adjust to onboard doorbell chime to appropriate level. Factory setting -10db Page Level - adjust to set page level to appropriate level.
Page 4 PAGE OUT SPEAKER OUT DOORBELL + + + - - - STRIKE 1 STRIKE 2 CHIMES AUDIO MUTE DOORBELL A DOORBELL B UNIT ON TRIGGER ON + - MDS-6 Door-Tel +15VDC + - 9VDC-12VDC /100mA POWER SUPPLY 15VDC POWER SUPPLY - + 470 1/2W THIS IS ALTERNATIVE WIRING USING EXISTING POWER SUPPLY.
MCS-1 1.) IR Sensor - This is an Infrared Sensor window. We suggest you aim the external remote control directly at this window to pass commands back to and through the unit. 2.) Source Selector Buttons (1 - 6) - These buttons will select the source you want to listen to.
MCS-2 CONTROLLER The left side of this controller is identical to the MCS-1 consult last page. Page 6 8.) Reset 9.) Clear 10.) Clone RX 11.) Clone TX 12.) Clone/Learn LED 13.) OK LED 14.) Learn Button 15.) IR Sensor LED 16.) Numeric Entry 17.) Enter Button 18.
MCS-2 CONTROLLER (contd) 16.) Numeric Entry Keys (0 - 9) - Depending on the mode you are in these keys will allow direct track access on a CD, an individual station on TV or DSS, or a station on a tuner, etc. If you are in the macro mode, these will allow direct access to your stored macros.
The MCS-2 controller is designed to learn and store IR codes for virtually any piece of audio/video equipment. This enables the individual programming and use of multiple functions for all of your source components. Programming Individual Functions 1) Press the learn button on the controller.
MACRO PROGRAMMING The MCS-2 has 16 programmable macro memories. It will automatically transmit a series of 20 commands deep. To enter the macro mode - press macro and the either the 0 through 9 buttons OR the device source keys (1-6). You can insert a delay time from 1 to 99 seconds between steps (the default is .
Page 10 1) Remove the Decora cover plate, and controller face plate. 2) Place your wireless remote in learn mode. 3) Select the device bank button to program (i.e. TV, VCR, Tuner, Aux, etc.) on the wireless remote. 4) Select the button to be programmed on the learning remote.
Can I control volume and source selection with a wireless remote? Y es, the MCS-1 and the MCS-2 controllers have a built-in IR emitter that will teach learning remote the ChannelPlus IR codes for volume, source selection, and mute.
Page 12 What does it mean if the red power LED is lit on the controller , but none of the source LEDs is lit? This condition indicates that the controller is muted. Press the mute button to turn off the mute in that zone at which point one of the source LEDs should light.
INSTALLATION NOTES Date of Purchase: _________ Date of Install: ____________ Serial Number of Unit: __________________________________ Installing Company: ___________________ Name: __________ Installe.
SPECIFICATIONS Po wer Output: 20 Wa tts at 8 ohms x 12 F requency Response: 20 Hz-20 kHz (+/- 1 dB) T .H.D.: 0.2% or less @ rated power Signal/Noise Ratio: >80 dB (A weighted) Slew Rate: 10V/u sec.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Channel Plus MDS-6 c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Channel Plus MDS-6 - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Channel Plus MDS-6, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Channel Plus MDS-6 va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Channel Plus MDS-6, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Channel Plus MDS-6.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Channel Plus MDS-6. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Channel Plus MDS-6 ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
