Manuel d'utilisation / d'entretien du produit MK1032GAX du fabricant Toshiba
Aller à la page of 159
Toshiba Corporation Digital Media Network Company Page 1 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 1.1.1.1.1.1.1.1 TOSHIBA TOSHIBA Hard Disk Drive Specification 2.
Toshiba Corporation Digital Media Network Company Page 2 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Revision History 2.5 inch Hard Disk Drive MK1032GAX Product Specification Rev.
Toshiba Corporation Digital Media Network Company Page 3 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved The hard disk drive and product specifications contain essential information for the protection of users and others from possible injury and pr operty damage and to ensure correct handling.
Toshiba Corporation Digital Media Network Company Page 4 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved ● Since the drive is not designed or manufactured to be used for a system including equipment (*1) directly linked with human life, etc.
Toshiba Corporation Digital Media Network Company Page 5 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved ■ Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. ■ Do not drop.
Toshiba Corporation Digital Media Network Company Page 6 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Observe the following to prevent failure, malfunction or data loss. ● Follow the specifications for 7. POWER SUPPLY (page16), 9.
Toshiba Corporation Digital Media Network Company Page 7 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved TABLE OF CONTENTS 1. SCOPE .....................................................................................................
Toshiba Corporation Digital Media Network Company Page 8 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 10.3.3 Signal Treatment ........................................................................................................
Toshiba Corporation Digital Media Network Company Page 9 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 10.8.32 SET MAX ADDRESS EXT (37h) ..............................................................................................
Toshiba Corporation Digital Media Network Company Page 10 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Table of Figures F IGURE 1 MK1032GAX D IMENSIONS ..............................................................................
Toshiba Corporation Digital Media Network Company Page 11 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 2. SCOPE This document describes the specif ications of the following model, MK1032GAX of 2.5- inch type Winchester disk drives.
Toshiba Corporation Digital Media Network Company Page 12 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved ■ Do not disassemble, remodel or repair. Disassembly, remodeling or repair may cause injury, failure, or data loss. ● There is a certain probability of the drive causing failure including data error or data loss.
Toshiba Corporation Digital Media Network Company Page 13 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 4. KEY FEA TURES • High capacity in smallest size . 2.5inch-type 2 platters accomm odating formatted capacity of 100.030GB(MK1032GAX) .
Toshiba Corporation Digital Media Network Company Page 14 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 5. BASIC SPECIFICA TION MODEL MK1032GAX Formatted Capacity( gigabytes ) 100.030 Servo design method Sector Servo Recording method 60/61 ME2PR4+MNP Recording density Track / mm (TPI ) 4330(110k) Bit / mm ( BPI ) 29.
Toshiba Corporation Digital Media Network Company Page 15 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 6. PERFORMANCE Access time ( msec ) <*1> Track to track seek <*2> 2 Average seek <*3> 12 Max. seek <*4> 22 Rotation speed ( RPM ) 5,400 + 0.
Toshiba Corporation Digital Media Network Company Page 16 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 7. POWER REQUIREMENTS 7.1 Supply V oltage Allowable voltage 5V + 5% Allowable noise/ripple 100 mV p-p or less 7.2 Power Consumption Average (note 3) MK1032GAX S t a r t 4 .
Toshiba Corporation Digital Media Network Company Page 17 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 8. MECHANICAL SPECIFICA TIONS 8.1 Dimension Width 69.85mm ( 2.75” ) Height 9.5 mm ( 0.37”) Depth 100.0 mm ( 3.94” ) Figure 1 and Table 8.
Toshiba Corporation Digital Media Network Company Page 18 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 8.4.1 Screwing Four screws should be tightened equally with 0.39 N . m ( 4 kgf . cm ) torque. The depth should be 3.0 mm min. and 3.
Toshiba Corporation Digital Media Network Company Page 19 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Figure 1 MK1032GAX Dimensions.
Toshiba Corporation Digital Media Network Company Page 20 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Table 8.4-1 Dimensi ons SFF-8200 Rev1.1(*) SFF-8201 Rev1.2 SFF-8212 Rev1.2 MK1032GAX (Differences only) Dimension Millimeters Inches Millimeters Inches A1 − − 9.
Toshiba Corporation Digital Media Network Company Page 21 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Figure 2 Mounting Recommendation.
Toshiba Corporation Digital Media Network Company Page 22 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 9. ENVIRONMENT AL LIMITS 9.
Toshiba Corporation Digital Media Network Company Page 23 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 9.4 Altitude Operating - 300 m to 3,000 m Non operating - 400 m to 15,000 m 9.5 Acoustics ( Sound Power ) 25 dBA Average For idle mode ( Spindle in rotating ).
Toshiba Corporation Digital Media Network Company Page 24 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 9.7 EMC Adaptability The drive satisfies the following standards .
Toshiba Corporation Digital Media Network Company Page 25 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 10. RELIABILITY A failure is defined as an inability of the drive to perfo r.
Toshiba Corporation Digital Media Network Company Page 26 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 10.6 Load/Unload Be sure to issue and complete the following commands for unloading before cutting off the power supply. Following table shows the specific ation for normal load/unload cycles.
Toshiba Corporation Digital Media Network Company Page 27 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11. HOST INTERF ACE Related Standards Information technology - AT Attachment Interface with Extensi ons (ATA-2) X3T10.
Toshiba Corporation Digital Media Network Company Page 28 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.2 Electrical specification 11.2.1 Cable length and capacitance 0.46m MAX. 35pF MAX. 11.2.2 DC input/output Characteristics 11.
Toshiba Corporation Digital Media Network Company Page 29 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.3 Interface connector 11.3.1 ATA interface connector Figure 3 ATA interface connector Polarity key 43 44 1 2 2.00 2.00 × 24 = 48.
Toshiba Corporation Digital Media Network Company Page 30 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.3.2 Pin Assignment The following table describes all of the pins on the Task File Interface. Table 11.3-1 Signal pin assignment PIN No.
Toshiba Corporation Digital Media Network Company Page 31 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.3.3 Signal Treatment Driver types and requirem ents for the signal pull - up and down are as follows. Resistor requi reme n t i s mi nimu m f or th e host.
Toshiba Corporation Digital Media Network Company Page 32 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.3.4 Series resistance Each signal has its own series resistance.
Toshiba Corporation Digital Media Network Company Page 33 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved CSEL O 28 If jumper pins B through D are assigned, Drive0/Drive1 setting w ith this pin is valid. When grounded, the drive recognize s itself as a Drive0.
Toshiba Corporation Digital Media Network Company Page 34 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.4 Host Interface Timing 11.4.1 Program I/O Write Timing Transfer mode Symbol Meaning 0 1 2 3 4 t ASW Address Setup to -DOW Low (min.
Toshiba Corporation Digital Media Network Company Page 35 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.4.2 Program I/O Read Timing Transfer mode Symbol Meaning 0 1 2 3 4 t ASE Address Setup to -DIOR Low (min.) 70 50 30 30 25 t RE -DIOR Pulse Width (min.
Toshiba Corporation Digital Media Network Company Page 36 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.4.3 Multiword DMA Write Timing ATA/ATAPI-6 SPECIFICATIONS Transfer mode MODE 0 MODE 1 MODE 2 Symbol Meaning Min. Ma x. Min. Max.
Toshiba Corporation Digital Media Network Company Page 37 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.4.4 Multiword DMA Read Timing ATA/ATAPI-6 SPECIFICATIONS Transfer mode MODE 0 MODE 1 MODE 2 Symbol Meaning Min. Max. Min. Max.
Toshiba Corporation Digital Media Network Company Page 38 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.4.5 Ultra DMA Timing Initiating an Ultra DMA data in burst DMARQ (dev i c.
Toshiba Corporation Digital Media Network Company Page 39 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Sustained Ultra DMA data in burst t DVH t DVHIC DSTROBE at dev i ce DD(15:0).
Toshiba Corporation Digital Media Network Company Page 40 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Device terminating an Ultra DMA data in burst t AZ t IO RDYZ CRC DMARQ (dev .
Toshiba Corporation Digital Media Network Company Page 41 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Host terminating an Ultra DMA data in burst t CVH CRC t AZ DMARQ (dev i ce) .
Toshiba Corporation Digital Media Network Company Page 42 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Initiating an Ultra DMA data out burst DMARQ (dev i ce) DMACK- (host) STOP (.
Toshiba Corporation Digital Media Network Company Page 43 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Sustained Ultra DMA data out burst t DH t DHIC t DVH t DVHIC HSTROBE at host.
Toshiba Corporation Digital Media Network Company Page 44 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Host terminating an Ultra DMA data out burst DMARQ (dev i ce) DMACK- (host) .
Toshiba Corporation Digital Media Network Company Page 45 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Device terminating an Ul tra DMA data out burst DMARQ (dev i ce) DMACK- (hos.
Toshiba Corporation Digital Media Network Company Page 46 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved ATA/ATAPI specifications Transfer mode MODE 0 MODE 1 MODE 2 MODE 3 MODE 4 MODE 5 Symbo l Meaning Min. Max. Min. Max. Min. Max. Min.
Toshiba Corporation Digital Media Network Company Page 47 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.4.6 Reset Timing t M t N BUSY - RE S E T Symbol Meaning Minimum Maximum Unit Condition t M RESET pulse width (Low) 25 µ s t N RESET inactive to BSY active 400 ns 11.
Toshiba Corporation Digital Media Network Company Page 48 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.6 Address Decoding The host addresses the drive using programmed I/O. In this method, the required register address should be placed on the three host address lines, DA2 - DA0.
Toshiba Corporation Digital Media Network Company Page 49 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.7 Register Description In the following register descriptions, unused write bit should be treated as “don't care”, and unused read bits should be read as zeros.
Toshiba Corporation Digital Media Network Company Page 50 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.7.1.5 Security commands Password information is transferred during the execution of following four commands.
Toshiba Corporation Digital Media Network Company Page 51 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.7.2.2 Diagnostic Mode The drive enters diagnostic mode immediately afte r the power -on or after an Execute Diagnostics command.
Toshiba Corporation Digital Media Network Company Page 52 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.7.5 Sector Number Register - CS0 DA2-DA0 : 3 Read / Write The target logical sector number (starting from 1) for Read, Write, and Verify commands is set in this register.
Toshiba Corporation Digital Media Network Company Page 53 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.7.7.2 SMART commands This register should be set to C2h for SMART commands 11.7.8 Device/Head Register - CS0 DA2-DA0 : 6 Read / Write The value of this register is used to select the dr ive, Drive0 or Drive1, and head.
Toshiba Corporation Digital Media Network Company Page 54 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.7.9 Status Register -CS0 DA2-DA0:7 Read only This register contains the command status. The contents of the register are updated at the completion of each command and whenever the error occurs.
Toshiba Corporation Digital Media Network Company Page 55 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.7.10 Command Register - CS0 DA2-DA0 : 7 Write only The command register accepts commands for the driv e to perform fixed disk operations.
Toshiba Corporation Digital Media Network Company Page 56 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Table 11.7-2 Comm and Code Command Code Command Name Hex Value PARAMET ERS U.
Toshiba Corporation Digital Media Network Company Page 57 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Parameters are defined as follows. SC = SECTOR COUNT register. SN = SECTOR NUMBER register. CY = CYLINDER LOW and CY LINDER HIGH register.
Toshiba Corporation Digital Media Network Company Page 58 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.7.11 Alternate Status Register - CS1 DA2-DA0 : 6 Read only This register contains the same information as the stat us register in the Task File.
Toshiba Corporation Digital Media Network Company Page 59 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8 Command Descriptions The drive interprets the commands written in the comm and register by the host sy stem and executes them.
Toshiba Corporation Digital Media Network Company Page 60 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.1 Nop (00h) COMMAND CODE 0 0 0 0 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 61 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.5 Read Sector (20h/21h) COMMAND CODE 0 0 1 0 0 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 62 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.7 Write Sector (30h/31h) COMMAND CODE 0 0 1 1 0 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 63 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.9 Read Verify (40h) COMMAND CODE 0 1 0 0 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD starting head last possible SN starting sector start sector SC no.
Toshiba Corporation Digital Media Network Company Page 64 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved COMMAND CODE 0 0 1 1 1 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no. no change CY starting cylinder last possible HD starting head last possible SN starting sector start sector SC no .
Toshiba Corporation Digital Media Network Company Page 65 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved FORMAT TABLE ( FIRST 86 BYT ES ) (Ex. 43 logical sector mode) 0001, 0002, 0003, 0004, 0005, 0006, 0007, 0008, 0009, 0013, 0015, 0016, 0017, 0018,.
Toshiba Corporation Digital Media Network Company Page 66 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.13 Seek (7xh) COMMAND CODE 0 1 1 1 X X X X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 67 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.16 Initialize Device Parameters (91h) COMMAND CODE 1 0 0 1 0 0 0 1 REGI.
Toshiba Corporation Digital Media Network Company Page 68 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.17 Download Microcode (92h) COMMAND CODE 1 0 0 0 0 0 1 0 REGISTER REGIS.
Toshiba Corporation Digital Media Network Company Page 69 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.18 Read Multiple (C4h) COMMAND CODE 1 1 0 0 0 1 0 0 REGISTER REGISTER S.
Toshiba Corporation Digital Media Network Company Page 70 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.19 Read Multiple EXT (29h) COMMAND CODE 0 0 1 0 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 71 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Disk errors occurred during Write Multiple command are pos ted after the attempted disk write of the block or partial block which are transferred.
Toshiba Corporation Digital Media Network Company Page 72 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.21 Write Multiple EXT (39h) COMMAND CODE 0 0 1 1 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 73 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.23 Read DMA (C8h/C9h) COMMAND CODE 1 1 0 0 1 0 0 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 74 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.25 Write DMA (CAh/CBh) COMMAND CODE 1 1 0 0 1 0 1 X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 75 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.27 Power Control (Exh) COMMAND CODE 1 1 1 0 X X X X REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 76 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.27.3 Stand-by (E2/96) This command causes the device to enter stand-by mode. If SC is non-zero then stand-by timer shall be enabled.
Toshiba Corporation Digital Media Network Company Page 77 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.28 Read Buffer (E4h) COMMAND CODE 1 1 1 0 0 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 78 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.30 Identify Device (ECh) COMMAND CODE 1 1 1 0 1 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 79 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-1 Identify Information WORD DESCRIPTION Hex.
Toshiba Corporation Digital Media Network Company Page 80 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-2 Identify Informati on (Continued) WORD DESCRIPTION Hex.
Toshiba Corporation Digital Media Network Company Page 81 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-3 Identify Informati on (Continued) WORD DESCRIPTION Hex.
Toshiba Corporation Digital Media Network Company Page 82 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-4 Identify Informati on (Continued) WORD DESCRIPTION Hex.
Toshiba Corporation Digital Media Network Company Page 83 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Table 11.8-5 Identify Informati on (Continued) WORD DESCRIPTION Hex.
Toshiba Corporation Digital Media Network Company Page 84 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Word descriptions: WORD 0: General configuration bit 15 0=ATA bit 14-8 Reserved bit 7 1=Removable cartridge bit 6 1=Fixed disk drive bit 5-3 Reserved bit 2 Response incomplete bit 1-0 Reserved The value for this WORD is 0040h.
Toshiba Corporation Digital Media Network Company Page 85 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved WORD 23-26: Firmware revision ( 8 ASCII characters ) WORD 27-46: Model name (40 ASCII characters) Drive Type MK1032GAX TOSHIBA_ MK1032GAX _.
Toshiba Corporation Digital Media Network Company Page 86 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved WORD 54: Number of current cylinders defined by INITIALIZE DEVICE PARAMETERS.
Toshiba Corporation Digital Media Network Company Page 87 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved WORD 62: Reserved WORD 63: Mode information for multiword DMA bit15- 8 Activ.
Toshiba Corporation Digital Media Network Company Page 88 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved WORD 69-79: Reserved WORD 80: Major version number If not 0000h or FFFFh, the device claims compliance with t he major version(s) as indicated by bits 1 - 6 being equal to one.
Toshiba Corporation Digital Media Network Company Page 89 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved WORD 84: Features / Command sets supported bit 15 0 (Fixed) bit 14 1 (Fixed).
Toshiba Corporation Digital Media Network Company Page 90 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved WORD 87: Features / Command sets enabled bit 15 0 (Fixed) bit 14 1 (Fixed) b.
Toshiba Corporation Digital Media Network Company Page 91 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved WORD 93: Hardware configuration test results bit 15 0 (Fixed) bit 14 1 (Fixed) bit 13 1=device detected CBLID- above V IH 0=device detected CBLID- below V IL bit12-8 Device 1 hardware reset result.
Toshiba Corporation Digital Media Network Company Page 92 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved WORD 128: Security status bit 15-9 Reserved bit 8 the security level.
Toshiba Corporation Digital Media Network Company Page 93 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.31 SET MAX (F9h) Individual SET MAX commands are identified by the value placed in the Features register. Table 11.8-6 shows these Features register values.
Toshiba Corporation Digital Media Network Company Page 94 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.31.2 Set Max Set Password F9h with the content of the Features register equal to 01h. COMMAND CODE 1 1 1 1 1 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 95 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved device remains in this state until a power cycle or the acceptance of a SET MAX UNLOCK or SET MAX FREEZE LOCK command. 11.8.31.
Toshiba Corporation Digital Media Network Company Page 96 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved A SET MAX SET PASSWORD command shall previously hav e been successfully completed. This command is not immediately preceded by a READ NATIVE MAX ADDRESS command.
Toshiba Corporation Digital Media Network Company Page 97 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.33 Read Native Max Address (F8h) COMMAND CODE 1 1 1 1 1 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 98 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.35 Set Features (EFh) COMMAND CODE 1 1 1 0 1 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 99 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.36 SECURITY SET PASSWORD (F1h) COMMAND CODE 1 1 1 1 0 0 0 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 100 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.37 SECURITY UNLOCK (F2h) COMMAND CODE 1 1 1 1 0 0 1 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 101 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.39 SECURITY ERASE UNIT (F4h) COMMAND CODE 1 1 1 1 0 1 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 102 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.41 SECURITY DISABLE PASSWORD (F6h) COMMAND CODE 1 1 1 1 0 1 1 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 103 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42 SMART Function Set (B0h) This command has a number of separate functions whic h can be selected via the Feature Register when the command is issued.
Toshiba Corporation Digital Media Network Company Page 104 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.1 SMART Read Attribute values COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 105 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Byte Description 0 Attribute ID number 01 - FFh 1-2 Status flag bit 0 (pre-failure/advisory bit) bit 0 = 0: If attribute value is less than the threshold, the drive is in advisory condition.
Toshiba Corporation Digital Media Network Company Page 106 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved BYTE 362: Off-line data collection status Value Definition 00h or 80h Off-line data collection activity was never started. 01h Reserved 02h or 82h Off-line data collection activi ty was completed without error.
Toshiba Corporation Digital Media Network Company Page 107 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved bit0 = 0 SMART ENABLE/DISABLE AUTOMATIC OFF-LINE command NOT supported This bit is s et to 1 bit 2 (abort/restart off-line by host) bit2 = 1 If another command is i ssued, off-line data collection operation is aborted.
Toshiba Corporation Digital Media Network Company Page 108 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.2 SMART Read Attribute thresholds COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 109 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.3 SMART Enable Disable Attribute Autosave COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 110 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.5 SMART Execute Off-line Immediate COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 111 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved e) If the device is in the process of performing the subcommand routine and.
Toshiba Corporation Digital Media Network Company Page 112 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved LBA 0 User LBA s pace LBA max Test span 1 Starting LBA for test span 1 Endi.
Toshiba Corporation Digital Media Network Company Page 113 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6 SMART Read Log Sector COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 114 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved SMART Log Directory Byte Descriptions 0-1 SMART Logging Version 2 Number of.
Toshiba Corporation Digital Media Network Company Page 115 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6.2.3 Command data structure The fifth command data structure will contain the command or reset for which the error is being reported.
Toshiba Corporation Digital Media Network Company Page 116 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved State field values Value State x0h Unknown x1h Sleep x2h Standby x3h Active.
Toshiba Corporation Digital Media Network Company Page 117 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Comprehensive error log Byte First sector Subsequent sectors 0 SMART error .
Toshiba Corporation Digital Media Network Company Page 118 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Self-test log data structure Byte Descriptions 0-1 Self-test log data structure revision number 2-25 First descriptor entry 26-49 Second descriptor entry .
Toshiba Corporation Digital Media Network Company Page 119 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.6.4.3 Self-test index The self-test index will point to the most recent entry . Initially, when the log is empty, the index will be set to zero.
Toshiba Corporation Digital Media Network Company Page 120 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved The Current LBA under test field shall be written with a val ue of zero by the host.
Toshiba Corporation Digital Media Network Company Page 121 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.7 SMART Write Log Sector COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 122 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.8 SMART Enable Operations COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 123 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.42.10 SMART Return Status COMMAND CODE 1 0 1 1 0 0 0 0 REGISTER REGISTER SETTING NORMAL COMPLETION DR DRIVE No.
Toshiba Corporation Digital Media Network Company Page 124 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.43 Read Log EXT (2Fh) COMMAND CODE 0 0 1 0 1 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 125 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved General Purpose Log Directory Byte Descriptions 0-1 General Purpose Logging.
Toshiba Corporation Digital Media Network Company Page 126 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.43.2.3 Extended Error log data structure The error log is viewed as a circular buffer.
Toshiba Corporation Digital Media Network Company Page 127 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Command data structure Byte Descriptions n Content of the Device Control register when the Command register was written. N+1 Content of the Features register (7:0) w hen the Command register was written.
Toshiba Corporation Digital Media Network Company Page 128 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Error data structure Byte Descriptions n Reserved n+1 Content of the Error register after command completion occurred. N+2 Content of the Sector Count register (7 :0) after command completion occurred.
Toshiba Corporation Digital Media Network Company Page 129 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved attributed to the receipt of faulty commands such as commands codes not implemented by the device or requests with invalid parameters or in valid addresses.
Toshiba Corporation Digital Media Network Company Page 130 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Extended Self-test log descriptor entry Byte Descriptions n Content of the LBA Low register. n+1 Content of the self-tes t execution status byte.
Toshiba Corporation Digital Media Network Company Page 131 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.44 Write Log EXT (3Fh) COMMAND CODE 0 0 1 1 1 1 1 1 REGISTER REGISTER SETTING NORMAL COMPLETION DR drive no.
Toshiba Corporation Digital Media Network Company Page 132 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45 Device Configuration (B1h) This command has a number of separate functions whic h can be selected via the Feature Register when the command is issued.
Toshiba Corporation Digital Media Network Company Page 133 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved The DEVICE CONFIGURATION FREEZE LOCK command pr events accidental modification of the Device Configuration Overlay settings.
Toshiba Corporation Digital Media Network Company Page 134 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Word Content 0 Data structure revision 1 Multiword DMA modes supported 15-3.
Toshiba Corporation Digital Media Network Company Page 135 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.3.1.5 Word 7: Command/features set supported Word 7 bit 0 if set to one indicates that the dev ice is capable of supporting the SMART feature set.
Toshiba Corporation Digital Media Network Company Page 136 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.4.1 Error outputs Register 7 6 5 4 3 2 1 0 Error na na na na na ABR.
Toshiba Corporation Digital Media Network Company Page 137 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved The format of the overlay transmitted by the device is described inTable 11.8-9. The restrictions on changing these bits is described in the text following Table 11.
Toshiba Corporation Digital Media Network Company Page 138 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.8.45.4.2.3 Word 2: Ultra DMA modes supported Word 2 bits 15:6 are reserved.
Toshiba Corporation Digital Media Network Company Page 139 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Word 7 bit 5 is cleared to disable support for t he READ DMA QUEUED and WR ITE DMA QUEUED commands and has the effect of clearing bit 1 in words 83 and 86 of the IDENTIFY DEVICE or IDENTIFY PACKET DEVICE response.
Toshiba Corporation Digital Media Network Company Page 140 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.9 Security Mode Feature Set The Security mode features allow the host to impl ement a security password system to prevent unauthorized access to the disk drive.
Toshiba Corporation Digital Media Network Company Page 141 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.9.3 Security mode operation from power-on In locked mode, the drive rejects media a ccess commands until a SECURITY UNLOCK command is successfully completed.
Toshiba Corporation Digital Media Network Company Page 142 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.9.4 Password lost If the user password is lost and High level security is set, the drive does not allow the user to access any data.
Toshiba Corporation Digital Media Network Company Page 143 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.9.5 Command Table This command table shows the drive’s response to commands when the Security Function is enabled. Table 11.
Toshiba Corporation Digital Media Network Company Page 144 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.10 Self-Monitoring, Analysis and Reporting T echnology Self-monitoring, .
Toshiba Corporation Digital Media Network Company Page 145 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved.
Toshiba Corporation Digital Media Network Company Page 146 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.11 Adaptive Power Mode Control Adaptive Power Mode Control is a function to reduc e power consumption without performance degradation.
Toshiba Corporation Digital Media Network Company Page 147 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.12 Reset A RESET condition sets the drive ( or both drives in case of Drive0/Drive1 connection ) BSY, allowing the drive to perform the specified initia lization required for normal operation.
Toshiba Corporation Digital Media Network Company Page 148 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.13 Drive0/Drive1 Configuration Drive address shall be set by the optional jumper of interface connector.
Toshiba Corporation Digital Media Network Company Page 149 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 11.14 Cache Memory 11.14.1 Cache Operations (1) READ CACHE OPERATION Receiv.
Toshiba Corporation Digital Media Network Company Page 150 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 12. Protocol Commands can be grouped into different classes accordi ng to the protocols used for command execution. The command classes with their asso ciated protocols are defined below.
Toshiba Corporation Digital Media Network Company Page 151 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 12.1 PIO data in commands Commands for this class are: • IDENTIFY DEVICE .
Toshiba Corporation Digital Media Network Company Page 152 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 12.2 PIO data out commands Commands for this class are: • (FORMAT TRACK) .
Toshiba Corporation Digital Media Network Company Page 153 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved The Write Multiple command transfers one block ( the number of sectors is defined by the Set Multiple command ) of data for each interrupt.
Toshiba Corporation Digital Media Network Company Page 154 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Non-data protocol: a) The host writes any required com mand param eters to the Features, Sector Count , Sector Number, Cyli nder High, Cylinder Low and Device/ Head registers.
Toshiba Corporation Digital Media Network Company Page 155 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 12.4 DMA data transfer commands Commands for this class are: • READ DMA (.
Toshiba Corporation Digital Media Network Company Page 156 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 12.5 Ultra DMA Ultra DMA protocol is used with Read DMA, and Wri te DMA commands. Ultra DMA modes are set by Set features command.
Toshiba Corporation Digital Media Network Company Page 157 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 3. Ultra DMA burst termination phase a) Either a sender or a recipient may terminate an Ultra DMA burst. b) Ultra DMA burst termination is not the same as command termination or completion.
Toshiba Corporation Digital Media Network Company Page 158 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved Combinational Logic Edge Trigger ed Register Device CRCOUT (15:0) CRCIN (15.
Toshiba Corporation Digital Media Network Company Page 159 of 159 © 2004, Copyright TOSHIBA Corporation All Rights Reserved 12.6 Other timings See HOST INTERFACE section for timings which are not shown here.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Toshiba MK1032GAX c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Toshiba MK1032GAX - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Toshiba MK1032GAX, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Toshiba MK1032GAX va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Toshiba MK1032GAX, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Toshiba MK1032GAX.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Toshiba MK1032GAX. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Toshiba MK1032GAX ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.