Manuel d'utilisation / d'entretien du produit KF-42SX200U du fabricant Sony
Aller à la page of 39
R 4-087-135- 32 (1) Instruction Manual KF-50SX200U KF-42SX200U ©2003 by Sony Corporation GB 00COKF50/42SX200U.fm Page 1 Tuesday, January 7, 2003 10:52 AM.
2 NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM A moulded plug complying with BS1363 is fitted to this equipment for your safety and convenience. Should the fuse in the plug supplied need to be replaced, a 5 AMP fuse approved by ASTA or BSI to BS 1362 (i.
3 GB Introduction Thank you for choosing this Sony “Grand Wega” model. Before operating the TV set, please read this manual thoroughly and retain it for future reference. • Symbols used in the manual: • Important information. • Information on a feature.
4 Safety Information Do not open the cabinet and the rear cover of the TV . Refer to qualified service personnel only . T o prevent fir e or shock hazard, do not expose the TV to rain or moisture. For your own safety , do not touch any part of the TV , power lead or aerial lead during lightning storms.
5 GB Overview of TV Buttons Checking the Accessories Supplied Overview Overview s 1 Hexagon key 2 Brackets 2 Screws 1 Cleaning cloth One Remote Control (RM-905) Two batteries (AAA size) Lamp indicator.
6 Overview Overview of Remote Control Buttons Overview To Temporarily Switch Off: Press to temporarily switch off TV (the standby indicator on the TV set lights up in red). Press again to switch on TV from standby mode. After 15-30 minutes without a signal and without any button being pressed, the TV set switches automatically into standby mode.
7 GB Installation Always remember to dispose of used batteries in an environmental friendly way. Inserting Batteries into the Remote Control Installation Make sure you insert the batteries using the correct polarities.
8 Installation Installation Connecting cables are not supplied. Connecting the Aerial and VCR Stabilizing the TV set the set After setting up, secure the TV set to a wall, etc., using the supplied brackets and screws, for safety purposes. 1 Mount the two supplied brackets with the screws provided to the upper rear side of the TV set.
9 GB First Time Operation The first time you switch on your TV, a sequence of menu screens appear on the TV enabling you to 1) choose the language of the menu screen, 2) choose the country in which yo.
10 First Time Operation 6 After all available broadcast channels are captured and stored, the Programme Sorting menu appears automatically on the screen enabling you to change the order in which the channels appear on the screen. a) If you wish to keep the broadcast channels in the tuned order, go to step 7.
11 GB 1 Press the button on the remote control repeatedly to select one of the following formats. Smart: imitation of wide screen effect for 4:3 broadcast. 4:3: conventional 4:3 picture size, full picture information. 14:9: compromise between 4:3 and 16:9 picture size.
12 Picture Adjustment Select: Enter Menu: Picture Mode Contrast Brightness Colour Sharpness Reset AI Noise Reduction Colour T one Personal On Off Normal Audio Adjustment Sound Effect Equaliser Adjustment Virtual Effect Balance Auto Vol. Control Dual Sound Volume Dual Sound Mono Off Mono Select: Enter Menu: 0 .
13 GB 1 Press the button on the remote control to display the menu on the screen. 2 Push the joystick to enter the Picture Adjustment menu. 3 Push the joystick or to select the item you wish to change, then push to enter.
14 Menu System Menu System Although the sound is adjusted at the factory, you can modify it to suit your own taste. Adjusting the Sound 1 Press the button on the remote control to display the menu on the screen. 2 Push the joystick to select the symbol, then push to enter to the Audio Adjustment menu.
15 GB Menu System 4 Push the joystic k//o r t o alter the selected item, then press the button to store the new adjustment. 5 Repeat steps 3 and 4 to alter the other items.
16 Menu System Menu System Using the Features menu you can: a) Select if you want to listen to the sound from the TV set directly or through an external amplifier. b) Automatically adjust the size of picture. c) Select a time period after which the TV set switches itself into standby mode.
17 GB 1 Press the button on the remote control to display the menu on the screen. 2 Push the joystick to select the symbol, then push to enter the Set Up menu. 3 Push the joystick or to select Manual Set Up , then push to enter. 4 Push the joystick to or to select Manual Programme Preset , then push to enter.
18 Menu System Menu System Names for channels (TV Broadcasts) are usually taken automatically from Teletext if available. You can however name a channel or an input video source using up to five characters (letters or numbers). Using this function, you can easily identify which channel (TV Broadcasts) or video source you are watching.
19 GB 1 Press the button on the remote control to display the menu on the screen. 2 Push the joystick to select the symbol, then push to enter the Set Up menu. 3 Push the joystick or to select Manual Set Up , then push to enter. 4 Push the joystick or to select Manual Programme Preset , then push to enter.
20 Menu System Menu System With this feature you can: a) Individually attenuate the strength of a channel signal in case there is a strong local aerial signal (characteristically a striped picture). b) Individually adjust the volume level of each channel.
21 GB 1 Press the button on the remote control to display the menu on the screen. 2 Push the joystick to select the symbol, then push to enter the Set Up menu. 3 Push the joystick or to select Manual Set Up , then push to enter. 4 Push or to select Personal ID , then push to enter.
22 Menu System This function provides an overview of some of the features available on this TV set. Using the Demo Mode Menu System 1 Press the button on the remote control to display the menu on the screen. 2 Push the joystick to select the symbol, then push to enter the Set Up menu.
23 GB 1 Press the button repeatedly on the remote control until the symbol … 1 or … 2 appears on the screen. • … 1 symbol for devices connected to the : 1/ 1 Scart connector. • … 2 symbol for devices connected to the : 2/ 2 Scart connector.
24 Menu System Menu System This function enables you to select the size of the picture coming from the input source. It also allows you to assign a name to the optional equipment you have connected to the sockets of this TV set. This name can contain up to 5 characters (letters or numbers).
25 GB 1 Press the button on the remote control to select the PIP mode. Now 13 programme positions appear on the screen, with the current channel in the centre. The programme displayed at the top left will be highlighted by a frame around it. 2 Push the joystic k//o r t o move within the 13 displayed channels.
26 Teletext Teletext Most TV channels broadcast information via Teletext. The index page of the teletext service (usually page 100) gives you information on how to use the service. ! Please use a TV channel with a strong signal, otherwise there may be Teletext errors.
27 GB Using the Teletext menu 1 With Teletext switched on, press the button on the remote control to display the teletext menu on the TV screen. 2 Push the joystick or to select your chosen item, then push to to display the relevant sub menu. 3 To remove the teletext menu from the screen, press the button.
28 NexTView NexTView * (depending on availability of service) NexTView is an on-screen electronic programme guide (EPG), providing you with programme information for different broadcasters. NexTView * Selecting your NexTView provider The TV set automatically selects the best NexTView provider for you.
29 GB Using the Long Info menu With this menu screen, you can set timers or record selected programmes. 1 Push or to select a future programme in the programme list column.
30 Optional Connections Acceptable input signal A Audio/video and RGB signal B Audio/video and RGB signal C Audio/video and S video signal D Centre speaker input Set “Speaker” on the Features menu to “Centre in”. E No inputs F S Video signal G Video signal H Audio signal I No input Available output signal Video/audio from TV tuner.
31 GB Additional Information when connecting equipment Connecting a VCR We recommend you connect your VCR to the C socket using a scart lead. If you do not have a scart lead, use the “Manually Tuning the TV” section of this instruction manual to tune in the channel of the VCR test signal to TV programme number “0”.
32 Optional Connections Optional Connections Smartlink is a direct link between the TV set and a VCR. For Smartlink you need: • A VCR which supports Smartlink, NextView Link, Easy Link or Megalogic. Megalogic is a trademark of Grundig Corporation. EasyLink is a trademark of Philips Corporation.
33 GB Additional Information In it’s default condition this remote control operate the basic functions of this Sony TV, Sony DVDs and most Sony VCRs.
34 When the lamp becomes dark or the picture colour is not normal or the lamp indicator on the TV set flashes, replace with a new lamp. • Only use the lamp XL-2000E for replacement. If you use another lamp, it may cause damage to the TV set. • Do not remove the lamp except when replacing it.
35 GB Additional Information Additional Information For the best picture quality, try to position the TV set so that you can view the screen from within the areas shown below.
36 Additional Information Additional Information Specifications TV system B/G/H, D/K, I, L Colour system PAL, SECAM NTSC 3.58, 4.43 (only Video In) Channel coverage VHF: E2-E12 UHF: E21-E69 CATV: S1-S20 HYPER: S21-S41 D/K: R1-R12, R21-R69 I: UHF B21-B69 L: F2-F10, B-Q, F21-F69 Projected picture size • KF-50SX200U: 50 inches (approx.
37 GB Problem No picture (screen is dark), no sound. Poor or no picture (screen is dark), but good sound. Poor picture quality when watching a RGB video source.
38 MAIN TRANSMITTERS BBC1 BBC2 ITV CH4 CH5 London & South East 1 Bluebell Hill 40 46 43 65 - 2 Crystal Palace 26 33 23 30 - 3 Dover 50 56 66 53 - 4 Heathfield 49 52 64 67 - 5 Oxford 57 63 60 53 49.
http://www.sony.net/ Sony España, S.A. Printed in Spain Ecological Paper - Totally Chlorine Free 02BCKF50/42SX200U.fm Page 1 Tuesday, January 7, 2003 11:00 AM.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Sony KF-42SX200U c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Sony KF-42SX200U - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Sony KF-42SX200U, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Sony KF-42SX200U va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Sony KF-42SX200U, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Sony KF-42SX200U.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Sony KF-42SX200U. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Sony KF-42SX200U ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
