Manuel d'utilisation / d'entretien du produit P9X79EWS du fabricant Asus
Aller à la page of 148
Motherboard SABERTOOTH X79.
ii E8040 Revised Edition V3 January 2013 Copyright © 2013 ASUST eK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, t.
iii Contents Contents ...................................................................................................................... iii Notices vi Safety information ............................................................................
iv Contents 2.3.10 Expension Card installation....................................................... 2-38 2.3.1 1 Rear panel connection .............................................................. 2-39 2.3.12 Audio I/O connections .................
v Contents 4.2.2 Obtaining the software manuals.................................................. 4-2 4.3 Software information ................................................................................. 4-3 4.3.1 AI Suite II.....................
vi Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation.
vii Safety information Electrical safety • T o prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. • When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected.
viii About this guide Th is u se r gu id e co nt ai ns t he in fo rm at io n yo u ne ed w he n in st al li ng a nd co n gu ri ng t he m ot he rb oa rd. How this guide is organized This guide contains the following parts: • Chapter 1: Product introduction This chapter describes the features of the motherboard and the new technology it supports.
ix Conventions used in this guide T o ensure that you perform certain tasks properly , take note of the following symbols used throughout this manual. T ypography Bold text Indicates a menu or an item to select. Italic s Used to emphasize a word or a phrase.
x SABERTOOTH X79 specications summary (continued on the next page) CPU Intel ® Socket 201 1 for 2nd Generation Intel ® Core™ i7 Processor Extreme Edition Supports Intel ® T urbo Boost T echnology 2.0 * Refer to www .asus.com for Intel CPU support list Chipset Intel ® X79 Express Chipset Memory 8 x DIMM, Max.
xi (continued on the next page) SABERTOOTH X79 specications summary Exclusive TUF Features “Ultimate COOL!” Thermal Solutions - TUF Thermal Armor - TUF Thermal Radar “TUF ENGINE!” Power Design - 8+2+2+2 Digital Phase Power Design - TUF Components (Choke, Cap.
xii *Specications are subject to change without notice. SABERTOOTH X79 specications summary Internal I/O Connectors 1 x USB 3.0/2.0 connector supports additional 2 USB 3.0/2.0 ports (19-pin; moss green) 4 x USB 2.0/1.1 connectors support additional 8 USB 2.
ASUS SABERT OOTH X79 1-1 Chapter 1 1.1 Welcome! Thank you for buying an ASUS ® SABERTOOTH X79 motherboard! The motherboard delivers a host of new features and latest technologies, making it another s.
1-2 Chapter 1: Product Introduction Chapter 1 1.3 Special features 1.3.1 Product highlights Intel ® Socket 201 1 for 2nd Generation Intel ® Core™ i7 Process Extreme Edition This motherboard suppor.
ASUS SABERT OOTH X79 1-3 Chapter 1 Extra SA T A 6.0 Gb/s Support The Intel ® X79 Express Chipset natively supports the next-generation Serial A T A (SA T A) interface, delivering up to 6.
1-4 Chapter 1: Product Introduction Chapter 1 1.3.4 “Safe & Stable!” Guardian Angel MemOK! MemOK! quickly ensures memory boot compatibility . This remarkable memory rescue tool requires a mere push of a button to patch memory issues. MemOK! determines failsafe settings and dramatically improves your system boot success.
ASUS SABERT OOTH X79 1-5 Chapter 1 ASUS MyLogo2™ This feature allows you to convert your favorite photo into a 256-color boot logo for a more colorful and vivid image on your screen. ASUS Multi-language BIOS The multi-language BIOS allows you to select the language of your choice from the available options.
1-6 Chapter 1: Product Introduction Chapter 1 ErP Ready The motherboard is European Union’s Energy-related Products (ErP) ready , and ErP requires products to meet certain energy efciency requirement in regards to energy consumptions.
ASUS SABERT OOTH X79 2-1 2.1 Before you proceed T ake note of the following precautions before you install motherboard components or change any motherboard settings.
2-2 Chapter 2: Hardware information Chapter 2 Refer to 2.2.8 Internal connectors and 2.3.1 1 Rear panel connection for more information about rear panel connectors and internal connectors.
ASUS SABERT OOTH X79 2-3 Chapter 2 Layout contents Connectors/Jumpers/Slots Page 1. CPU, chassis, power , and assistant fan connectors (4-pin CPU_F AN, CHA_F AN1–4, CPU_OPT , ASST_F AN) 2-22 2. DDR3 DIMM slots channel A and B 2-5 3. A TX power connectors (24-pin EA TXPWR, 8-pin EA TX12V) 2-24 4.
2-4 Chapter 2: Hardware information Chapter 2 2.2.2 Central Processing Unit (CPU) The motherboard comes with a surface mount LGA201 1 socket designed for the Intel ® Core™ i7 Processor Extreme Edition. • Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent.
ASUS SABERT OOTH X79 2-5 Chapter 2 Recommended memory congurations 2.2.3 System memory The motherboard comes with eight Double Data Rate 3 (DDR3) Dual Inline Memory Modules (DIMM) slots. A DDR3 module is notched differently from a DDR or DDR2 module.
2-6 Chapter 2: Hardware information Chapter 2 Memory congurations Y ou may install 1GB, 2GB, 4GB and 8GB unbuffered and non-ECC DDR3 DIMMs into the DIMM sockets. • Y ou may install varying memory sizes in Channel A, Channel B, Channel C and Channel D.
ASUS SABERT OOTH X79 2-7 Chapter 2 SABERTOOTH X79 Motherboard Qualied V endors Lists (QVL) DDR3 1333 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO.
2-8 Chapter 2: Hardware information Chapter 2 V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 2 DIMM 4 DIMM 6 DIMM 8 DIMM OCZ OCZ3G1333L V8GK 8GB(2x4GB) DS - - 9-9-9 1.65 • OCZ OCZ3RPR1333C9L V8GK 8GB(2x4GB) DS - - 9-9-9 1.
ASUS SABERT OOTH X79 2-9 Chapter 2 SABERTOOTH X79 Motherboard Qualied V endors Lists (QVL) DDR3 1600 MHz capability V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 2 DIMM 4 DIMM 6 DIMM 8 DIMM A-DA TA AX3U1600XC2G79(XMP) 2GB SS - - 9-9-9-24 1.
2-10 Chapter 2: Hardware information Chapter 2 V endors Part No. Size SS/ DS Chip Brand Chip NO. Timing V oltage DIMM socket support (Optional) 2 DIMM 4 DIMM 6 DIMM 8 DIMM EK Memory EKM324L28BP8-I16(X.
ASUS SABERT OOTH X79 2-1 1 Chapter 2 * The above QVL is for the DDR3 2000 MHz memory module. Due to CPU behavior , DDR3 2000 MHz memory module will run at DDR3 1866 MHz frequency . SABERTOOTH X79 Motherboard Qualied V endors Lists (QVL) DDR3 1866 MHz capability* (continued) V endors Part No.
2-12 Chapter 2: Hardware information Chapter 2 2.2.4 Expansion slots Ensure to unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components. Slot No. Slot Description 1 PCIe 3.
ASUS SABERT OOTH X79 2-13 Chapter 2 • In single VGA card mode, use the PCIe 3.0 x16_1 slot (beige) for a PCI Express x16 graphics card to get better performance. • In CrossFireX™ or SLI™ mode, use the PCIe 3.0 x16_1 and PCIe 3.0 x16_2 slots for PCI Express x16 graphics cards to get better performance.
2-14 Chapter 2: Hardware information Chapter 2 2.2.5 Jumper Clear RTC RAM (3-pin CLRTC) This jumper allows you to clear the Real T ime Clock (RTC) RAM in CMOS. Y ou can clear the CMOS memory of date, time, and system setup parameters by erasing the CMOS RTC RAM data.
ASUS SABERT OOTH X79 2-15 Chapter 2 2.2.6 Onboard switch The onboard switch allows you to ne-tune performance when working on a bare or open- case system. This is ideal for overclockers and gamers who continually change settings to enhance system performance.
2-16 Chapter 2: Hardware information Chapter 2 2.2.7 Onboard LEDs 1. Standby Power LED The motherboard comes with a standby power LED. The green LED lights up to indicate that the system is ON, in sleep mode, or in soft-off mode.
ASUS SABERT OOTH X79 2-17 Chapter 2 2.2.8 Internal connectors 1. Intel ® X79 Serial A T A 6Gb/s connectors (7-pin SA T A6G_1/2 [brown]) These connectors connect to Serial A T A 6Gb/s hard disk drives via Serial A T A 6Gb/s signal cables.
2-18 Chapter 2: Hardware information Chapter 2 2. Intel ® X79 Serial A T A 3Gb/s connectors (7-pin SA T A3G_3–6 [black]) These connectors connect to Serial A T A 3Gb/s hard disk drives and optical disc drives via Serial A T A 3Gb/s signal cables.
ASUS SABERT OOTH X79 2-19 Chapter 2 3. Marvell ® Serial A T A 6Gb/s connectors (7-pin SA T A6G_E1/E2 [gray]) These connectors connect to Serial A T A 6Gb/s hard disk drives via Serial A T A 6Gb/s signal cables. • The SA T A6G_E1/E2 (gray) connectors do not support A T API devices.
2-20 Chapter 2: Hardware information Chapter 2 5. USB 3.0 connector (20-1 pin USB3_56) This connector is for the additional USB 3.0 ports, and complies with the USB 3.0 specicaton that supports up to 4.8 Gbps connection speed. If the USB 3.0 front panel cable is available from your system chassis, with this USB 3.
ASUS SABERT OOTH X79 2-21 Chapter 2 Y ou can connect the front panel USB cable to the ASUS Q-Connector (USB, blue) rst, and then install the Q-Connector (USB) to the USB connector onboard if your chassis supports front panel USB ports. Never connect a 13 94 cable to the USB connectors.
2-22 Chapter 2: Hardware information Chapter 2 8. CPU, chassis, and assistant fan connectors (4-pin CPU_F AN; 4-pin CPU_OPT F AN; 4-pin CHA_F AN1-4; 4-pin ASST_F AN) Connect the fan cables to the fan connectors on the motherboard, ensuring that the black wire of each cable matches the ground pin of the connector .
ASUS SABERT OOTH X79 2-23 Chapter 2 9. Front panel audio connector (10-1 pin AAFP) This connector is for a chassis-mounted front panel audio I/O module that supports either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel audio I/O module cable to this connector .
2-24 Chapter 2: Hardware information Chapter 2 • For a fully congured system, we recommend that you use a power supply unit (PSU) that complies with A TX 12 V Specication 2.0 (or later version) and provides a minimum power of 450 W . • Do not forget to connect the 4-pin/8-pin EA TX12 V power plug; otherwise, the system will not boot.
ASUS SABERT OOTH X79 2-25 Chapter 2 • System power LED (2-pin PLED) This 2-pin connector is for the system power LED. Connect the chassis power LED cable to this connector . The system power LED lights up when you turn on the system power , and blinks when the system is in sleep mode.
2-26 Chapter 2: Hardware information Chapter 2 2.3 Building your computer system 2.3.1 Additional tools and components to build a PC system 1 bag of screws Philips (cross) screwdriver PC chassis Power.
ASUS SABERT OOTH X79 2-27 Chapter 2 2.3.2 CPU installation Please note the order in opening/ closing the double latch. Follow the instructions printed on the metal sealing hatch or the illustrations shown below in this manual. The plastic cap will pop up automatically once the CPU is in place and the hatch properly sealed down.
2-28 Chapter 2: Hardware information Chapter 2 B A 9 B A 7 8 5 6.
ASUS SABERT OOTH X79 2-29 Chapter 2 2.3.3 CPU heatsink and fan assembly installation Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary .
2-30 Chapter 2: Hardware information Chapter 2 1 2 3 T o remove a DIMM 2.3.4 DIMM installation B A.
ASUS SABERT OOTH X79 2-31 Chapter 2 2.3.5 Motherboard installation The diagrams in this section are for reference only . The motherboard layout may vary with models, but the installation steps remain the same.
2-32 Chapter 2: Hardware information Chapter 2 DO NOT overtighten the screws! Doing so can damage the motherboard. 3.
ASUS SABERT OOTH X79 2-33 Chapter 2 2.3.6 Thermal Armor for ASUS SABERT OOTH X79 The Thermal Armor for ASUS SABER TOOTH X79 consists of a rear I/O cover and a PCH cover and fan assembly , providing effective dissipation of the heat generated from the motherboard components.
2-34 Chapter 2: Hardware information Chapter 2 4. Place the fan cable into the cable slot on the rear I/O cover . 5. Connect the fan cable to the ASST_F AN connector on the motherboard. 6. The PCH cover is pre-assembled with a slim-type fan, providing effective heat dissipation to the PCH.
ASUS SABERT OOTH X79 2-35 Chapter 2 2.3.7 A TX Power connection 1 2 OR OR.
2-36 Chapter 2: Hardware information Chapter 2 2.3.8 SA T A device connection OR 2 OR 1.
ASUS SABERT OOTH X79 2-37 Chapter 2 2.3.9 Front I/O Connector IDE_LED POWER SW RESET SW IDE_LED- IDE_LED+ PWR Reset Ground Ground 1 2 T o install ASUS Q-Connector USB 2.0 AAFP T o install USB 2.0 Connector T o install front panel audio connector USB 3.
2-38 Chapter 2: Hardware information Chapter 2 2.3.10 Expension Card installation T o install PCIe x16 cards T o install PCIe x1 cards T o install PCI cards.
ASUS SABERT OOTH X79 2-39 Chapter 2 2.3.1 1 Rear panel connection 5 6 7 8 9 11 12 2 3 4 1 10 * and **: Refer to the tables on the next page for LAN port LED and audio port denitions. Rear panel connectors 1. PS/2 keyboard/mouse combo port 7. IEEE 1394a port 2.
2-40 Chapter 2: Hardware information Chapter 2 • DO NOT insert a dif ferent connector to the external SA T A port. • DO NOT connect a keyboard/mouse to any USB 3.0 port when installing Windows ® operating system. • Due to USB 3.0 controller limitation, USB 3.
ASUS SABERT OOTH X79 2-41 Chapter 2 Connect to Headphone and Mic Connect to 2.1 channel Speakers Connect to Stereo Speakers 2.3.12 Audio I/O connections Audio I/O ports.
2-42 Chapter 2: Hardware information Chapter 2 Connect to 4.1 channel Speakers Connect to 5.1 channel Speakers Connect to 7.1 channel Speakers.
ASUS SABERT OOTH X79 2-43 Chapter 2 Updating BIOS may have risks. If the BIOS program is damaged during the process causing the system unable to reboot, please contact the local service station for help. 2.3.13 USB BIOS Flashback 1. Download the BIOS ROM le from the ASUS service website (www.
2-44 Chapter 2: Hardware information Chapter 2 2.4 Starting up for the rst time 1. After making all the connections, replace the system case cover . 2. Be sure that all switches are of f. 3. Connect the power cord to the power connector at the back of the system chassis.
ASUS SABERT OOTH X79 3-1 Chapter 3 Chapter 3: BIOS setup Chapter 3 3.1 Knowing BIOS The new ASUS UEFI BIOS is an Unied Extensible Firmware Interface that complies with UEFI architecture, offering a user-friendly interface that goes beyond traditional keyboard- only BIOS controls to enable more exible and convenient mouse input.
3-2 Chapter 3: BIOS setup Chapter 3 3.2.1 EZ Mode By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ Mode provides you an overview of the basic system information, and allows you to select the display language, system performance mode and boot device priority .
ASUS SABERT OOTH X79 3-3 Chapter 3 3.2.2 Advanced Mode The Advanced Mode provides advanced options for experienced end-users to congure the BIOS settings. The gure below shows an example of the Advanced Mode. Refer to the following sections for the detailed congurations.
3-4 Chapter 3: BIOS setup Chapter 3 Menu items The highlighted item on the menu bar displays the specic items for that menu. For example, selecting Main shows the Main menu items. The other items (Ai T weaker, Advanced, Monitor , Boot, T ool, and Exit) on the menu bar have their respective menu items.
ASUS SABERT OOTH X79 3-5 Chapter 3 3.3 Main menu The Main menu screen appears when you enter the Advanced Mode of the BIOS Setup program. The Main menu provides you an overview of the basic system information, and allows you to set the system date, time, language, and security settings.
3-6 Chapter 3: BIOS setup Chapter 3 Administrator Password If you have set an administrator password, we recommend that you enter the administrator password for accessing the system. Otherwise, you might be able to see or change only selected elds in the BIOS setup program.
ASUS SABERT OOTH X79 3-7 Chapter 3 3.4 Ai Tweaker menu The Ai T weaker menu items allow you to congure overclocking-related items. Be cautious when changing the settings of the Ai T weaker menu items. Incorrect eld values can cause the system to malfunction.
3-8 Chapter 3: BIOS setup Chapter 3 Scroll down to display the following items: Ai Overclock T uner [Auto] Allows you to select the CPU overclocking options to achieve the desired CPU internal frequency . Select any of these preset overclocking conguration options: [Auto] Loads the optimal settings for the system.
ASUS SABERT OOTH X79 3-9 Chapter 3 EPU Power Saving Mode [Disabled] Allows you to enable or disable the EPU power saving function. Conguration options: [Disabled] [Enabled] OC T uner OC T uner automatically overclocks the frequency and voltage of CPU and DRAM for enhancing the system performance.
3-10 Chapter 3: BIOS setup Chapter 3 DRAM COMMAND Mode [Auto] Conguration options: [Auto] [1 DRAM Clock] [2 DRAM Clock] [3 DRAM Clock] Secondary Timings DRAM RAS# to RAS# Delay [Auto] Conguratio.
ASUS SABERT OOTH X79 3-1 1 Chapter 3 Latency Timings DRAM RTL (CHA/B/C/D D0/1 R0/1 [Auto]) Conguration options: [Auto] [Advance 14 Clock] [Advance 12 Clock] – [Advance 4 Clock] [Advance 2 Clock] .
3-12 Chapter 3: BIOS setup Chapter 3 Some of the following items are adjusted by typing the desired values using the numeric keypad and press the <Enter> key . Y ou can also use the <+> and <-> keys to adjust the value. T o restore the default setting, type [auto] using the keyboard and press the <Enter> key .
ASUS SABERT OOTH X79 3-13 Chapter 3 CPU Power Duty Control [T .Probe] [T .Probe] Maintains the VRM thermal balance. [Extreme] Maintains the VRM current balance. CPU Power Phase Control [Auto] Phase number is the number of working VRM phase. Increasing phase number under heavy system loading to get more transient and better thermal performance.
3-14 Chapter 3: BIOS setup Chapter 3 CPU Ratio [Auto] Al low s yo u t o m anu all y adj ust the ma xim um n on- tur bo CPU r ati o. U se <+> an d <- > k eys to ad jus t th e v alu e. The va lid va lue ran ges va ry ac cor ding to yo ur CPU mod el.
ASUS SABERT OOTH X79 3-15 Chapter 3 Offset Mode Sign [+] This item appears only when you set the CPU VCORE V oltage item to [Offset Mode]. [+] T o offset the voltage by a positive value. [–] T o offset the voltage by a negative value. CPU VCORE Offset V oltage [Auto] This item allows you to set the Offset voltage.
3-16 Chapter 3: BIOS setup Chapter 3 VTTCPU V oltage [Auto] Allows you to set the VTTCPU voltage. The values range from 1.05V to 1.70V with a 0.00625V interval. PCH 1.1v V oltage [Auto] Allows you to set the 1.1v Platform Controller Hub voltage. The values range from 1.
ASUS SABERT OOTH X79 3-17 Chapter 3 Be cautious when changing the settings of the Advanced menu items. Incorrect eld values can cause the system to malfunction. 3.5 Advanced menu The Advanced menu items allow you to change the settings for the CPU and other system devices.
3-18 Chapter 3: BIOS setup Chapter 3 Intel Adaptive Thermal Monitor [Enabled] [Disabled] Disables the CPU thermal monitor function. [Enabled] Enables the overheated CPU to throttle its clock speed to cool down.
ASUS SABERT OOTH X79 3-19 Chapter 3 Execute Disable Bit [Enabled] [Enabled] Enables the No-Execution Page Protection T echnology . [Disabled] Forces the XD feature ag to always return to zero (0).
3-20 Chapter 3: BIOS setup Chapter 3 High Precision Timer [Enabled] Allows you to enable or disable the High Precision Event T imer . Conguration options: [Disabled] [Enabled] 3.5.3 SA T A Conguration Whil e ente ring Se tup, t he BIOS autom atical ly d etects the pr esence of SA T A dev ices.
ASUS SABERT OOTH X79 3-21 Chapter 3 The following two items appear only when you set the SA T A Mode item to [IDE Mode]. Serial-A T A Controller 0 [Enhanced] Allows you to enabled/disabled the Serial-A T A Controller 0.
3-22 Chapter 3: BIOS setup Chapter 3 3.5.4 USB Conguration The items in this menu allow you to change the USB-related features. The USB Devices item shows the auto-detected values. If no USB device is detected, the item shows None . Legacy USB Support [Enabled] [Disabled] The USB devices can be used only for the BIOS setup program.
ASUS SABERT OOTH X79 3-23 Chapter 3 3.5.5 Onboard Devices Conguraton Azalia HD Audio [Enabled] [Disabled] Disables the controller . [Enabled] Enables the High Denition Audio Controller. The following two items appear only when you set the HD Audio Controller item to [Enabled].
3-24 Chapter 3: BIOS setup Chapter 3 VIA 1394 Controller [Enabled] This item allows user to enabled/disabled VIA 1394 controller . Conguration options: [Disabled] [Enabled] PCI Express x1_1 Slot Conguration [Auto] [AUTO] The system auto-detects the occupied PCIEx1_1 slot or SA T A6G_E1/E2 connector .
ASUS SABERT OOTH X79 3-25 Chapter 3 Restore AC Power Loss [Power Off] [Power On] The system goes into on state after an AC power loss. [Power Off] The system goes into off state after an AC power loss. [Last State] The system goes into either off or on state, whatever the system state was before the AC power loss.
3-26 Chapter 3: BIOS setup Chapter 3 3.6 Monitor menu The Monitor menu displays the system temperature/power status, and allows you to change the fan settings. CPU T emperature / MB T emperature [xxx�C/xxx�F] [xxx�C/xxx�F] The onboard hardware monitor automatically detects and displays the CPU and motherboard temperatures.
ASUS SABERT OOTH X79 3-27 Chapter 3 CPU Fan Profile [Standard] This item appears only when you enable the CPU Q-Fan Control feature and allows you to set the appropriate performance level of the CPU fan. [Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on the CPU temperature.
3-28 Chapter 3: BIOS setup Chapter 3 The following four items appear only when you set Chassis 1/2/3/4 Fan Prole to [Manual]. Chassis 1/2/3/4 Upper T emperature [70] Use the <+> and <-> keys to adjust the upper limit of the chassis temperature.
ASUS SABERT OOTH X79 3-29 Chapter 3 Assistant/PCH Lower T emperature [40] Displays the lower limit of the assistant/PCH temperature. Assistant/PCH Fan Min. Duty Cycle(%) [60] Use the <+> and <-> keys to adjust the minimum assistant/PCH fan duty cycle.
3-30 Chapter 3: BIOS setup Chapter 3 3.7 Boot menu The Boot menu items allow you to change the system boot options. Bootup NumLock State [On] [On] Sets the power-on state of the NumLock to [On]. [Off] Sets the power-on state of the NumLock to [Off]. Full Screen Logo [Enabled] [Enabled] Enables the full screen logo display feature.
ASUS SABERT OOTH X79 3-31 Chapter 3 Setup Mode [EZ Mode] [A dv an ce d Mo de ] Sets Advanced Mode as the default screen for entering the BIOS setup program. [EZ Mode] Sets EZ Mode as the default screen for entering the BIOS setup program. Boot Option Priorities These items specify the boot device priority sequence from the available devices.
3-32 Chapter 3: BIOS setup Chapter 3 3.8 Tool menu The T ool menu items allow you to congure options for special functions. Select an item then press <Enter> to display the submenu. 3.8.1 ASUS EZ Flash 2 Utility Allows you to run ASUS EZ Flash 2 Utility .
ASUS SABERT OOTH X79 3-33 Chapter 3 3.8.2 ASUS DRAM SPD Information This menu showed the DIMM slot related informatons..
3-34 Chapter 3: BIOS setup Chapter 3 3.8.3 ASUS O.C. Prole This item allows you to store or load multiple BIOS settings. The Setup Prole Status items show Not Installed if no prole is created.
ASUS SABERT OOTH X79 3-35 Chapter 3 3.8.4 ASUS Drive Xpert • Befo re usin g th e Drive Xpert f unction , en sure th at y ou have connect ed the SA T A sign al cabl es a nd insta lled SA T A hard d isk dri ves to the S A T A6G_E 1 an d SA T A6G_E2 conn ectors.
3-36 Chapter 3: BIOS setup Chapter 3 3.9 Exit menu The Exit menu items allow you to load the optimal default values for the BIOS items, and save or discard your changes to the BIOS items.
ASUS SABERT OOTH X79 3-37 Chapter 3 3.10 Updating BIOS The ASUS website publishes the latest BIOS versions to provide enhancements on system stability , compatibility , or performance. However , BIOS updating is potentially risky . If there is no problem using the current version of BIOS, DO NOT manually update the BIOS .
3-38 Chapter 3: BIOS setup Chapter 3 Updating the BIOS through the Internet T o update the BIOS through the Internet: 1. From the ASUS Update screen, select Update BIOS from Internet , and then click Next . 2. Select the ASUS FTP site nearest you to avoid network trafc.
ASUS SABERT OOTH X79 3-39 Chapter 3 • The screenshots in this section are for reference only . The actual BIOS information vary by models. • Refer to the software manual in the support DVD or visit the ASUS website at www .asus.com for detailed software conguration.
3-40 Chapter 3: BIOS setup Chapter 3 3.10.2 ASUS EZ Flash 2 utility The ASUS EZ Flash 2 feature allows you to update the BIOS without having to use a bootable oppy disk or an OS-based utility . Before you start using this utility , download the latest BIOS from the ASUS website at www .
ASUS SABERT OOTH X79 3-41 Chapter 3 3.10.3 ASUS CrashFree BIOS 3 utility The ASUS CrashFree BIOS 3 utility is an auto recovery tool that allows you to restore the BIOS le when it fails or gets corrupted during the updating process.
3-42 Chapter 3: BIOS setup Chapter 3 Booting the system in DOS environment 1. Insert the USB ash drive with the latest BIOS le and BIOS Updater to the USB port. 2. Boot your computer . When the ASUS Logo appears, press <F8> to show the BIOS Boot Device Select Menu .
ASUS SABERT OOTH X79 3-43 Chapter 3 2. The BIOS Updater backup screen appears indicating the BIOS backup process. When BIOS backup is done, press any key to return to the DOS prompt.
3-44 Chapter 3: BIOS setup Chapter 3 4. Select Y es and press <Enter>. When BIOS update is done, press <ESC> to exit BIOS Updater . Restart your computer . DO NOT shut down or reset the system while updating the BIOS to prevent system boot failure! • For BIOS Updater version 1.
ASUS SABERT OOTH X79 4-1 Chapter 4 If Autorun is NOT enabled in your computer , browse the contents of the support DVD to locate the le ASSETUP .EXE from the BIN folder .
4-2 Chapter 4: Software support Chapter 4 4.2.2 Obtaining the software manuals The software manuals are included in the support DVD. Follow the instructions below to get the necessary software manuals. The software manual les are in Portable Document Format (PDF).
ASUS SABERT OOTH X79 4-3 Chapter 4 4.3 Software information Most of the applications in the support DVD have wizards that will conveniently guide you through the installation. View the online help or readme le that came with the software application for more information.
4-4 Chapter 4: Software support Chapter 4 4.3.2 ASUS TUF Thermal Radar The TUF Thermal Radar monitors temps in critical parts of the motherboard in real time, automatically adjusting fan speeds to make sure the system maintains high stability without overheating.
ASUS SABERT OOTH X79 4-5 Chapter 4 Conguring system fan settings The TUF Thermal Radar provides easy-to-use fan proles for adjusting the CPU f an, assistant fan (I/O cover fan), PCH fan, and the.
4-6 Chapter 4: Software support Chapter 4 Y ou can also assign the specic system component(s) to monitor and have Thermal Radar to dynamically adjust the fan speeds in real-time when the temperature of the monitored system component reaches to certain degree.
ASUS SABERT OOTH X79 4-7 Chapter 4 4. If you are not sure how to choose the proper components to monitor and the percentage to adjust, click Auto and have Thermal Radar do the recommended settings for you.
4-8 Chapter 4: Software support Chapter 4 4.3.3 T urboV EVO ASUS T urboV EVO introduces T urboV that allows you to manually adjust the CPU frequency and relate d volta ge val ues. After installing AI Suite II from the motherboard support DVD, launch T urboV EVO by clicking T ool > T urboV EVO on the AI Suite II main menu bar .
ASUS SABERT OOTH X79 4-9 Chapter 4 Using Advanced Mode Click on the Advanced Mode tab to adjust the advanced voltage settings. Advanced mode Applies all changes immediately Undoes all changes without .
4-10 Chapter 4: Software support Chapter 4 CPU Strap Allows you to manually adjust CPU Strap. 1. Click the CPU Strap tab. 2. Drag the adjustment bar to the desired value. The graph on the right will change value accordingly . 3. Click Apply and reboot the system to make the change take ef fect.
ASUS SABERT OOTH X79 4-1 1 Chapter 4 4.3.4 DIGI+ Power Control DIGI+ PowerControl allows you to adjust VRM voltage and frequency modulation to enhance reliability and stability . It also provides the highest power efciency , generating less heat to longer component lifespan and minimize power loss.
4-12 Chapter 4: Software support Chapter 4 • The actual performance boost may vary depending on your CPU and DRAM specication. • Do not remove the thermal module.
ASUS SABERT OOTH X79 4-13 Chapter 4 4.3.5 Sensor Recorder Sensor Recorder monitors the changes in the system voltage, temperature, and fan speed on a timeline. The History Record function allows you to designate specic time spans on record to keep track of the three system statuses for certain purposes.
4-14 Chapter 4: Software support Chapter 4 4.3.6 USB 3.0 Boost The ASUS exclusive USB 3.0 Boost provides speed boost for USB 3.0 devices and the up-to-date support of USB Attached SCSI Protocol (UASP). With USB 3.0 Boost, you can accelerate the transfer speed of your USB 3.
ASUS SABERT OOTH X79 4-15 Chapter 4 4.3.7 ASUS SSD Caching This feature boosts system performance by using an installed SSD with no capacity limitations as a cache for frequently accessed data. Harness a combination of SSD-like performance and response and hard drive capacity with just one click.
4-16 Chapter 4: Software support Chapter 4 4.3.8 ASUS Update ASUS Update lays out the options for updating BIOS on your system. Update BIOS utility on your system or simply save the utility for later use just by following the directions on this convenient updating feature.
ASUS SABERT OOTH X79 4-17 Chapter 4 4.3.9 MyLogo2 This MyLogo utility lets you customize the boot logo. The boot logo is the image that appears on screen during the Power-On-Self-T ests (POST).
4-18 Chapter 4: Software support Chapter 4 2. Click on Auto T une to adjust image size compatibility or adjust the resolution bar . 3. Y ou can click on Booting Preview to preview the boot image. Then click Next. 4. Click on Flash to start updating the image to the boot logo.
ASUS SABERT OOTH X79 4-19 Chapter 4 4.3.10 Audio congurations The Realtek ® audio CODEC provides 8-channel audio capability to deliver the ultimate audio experience on your computer . The software provides Jack-Detection function, S/PDIF Out support, and interrupt capability .
4-20 Chapter 4: Software support Chapter 4 4.4 RAID congurations The motherboard comes with the Intel ® X79 chipset and Marvell SA T A controller that allow you to congure Serial A T A hard disk drives as RAID sets.
ASUS SABERT OOTH X79 4-21 Chapter 4 4.4.2 Installing Serial A T A hard disks The motherboard supports Serial A T A hard disk drives. For optimal performance, install identical drives of the same model and capacity when creating a disk array . T o install the SA T A hard disks for a RAID conguration: 1.
4-22 Chapter 4: Software support Chapter 4 Creating a RAID set T o create a RAID set: 1. From the utility main menu, select 1. Create RAID V olume and press <Enter>. The following screen appears: 2. Enter a name for the RAID set and press <Enter>.
ASUS SABERT OOTH X79 4-23 Chapter 4 5. Use the up/down arrow key to select a drive, and then press <Space> to select. A small triangle marks the selected drive.
4-24 Chapter 4: Software support Chapter 4 Deleting a RAID set T ake caution when deleting a RAID set. Y ou will lose all data on the hard disk drives when you delete a RAID set. T o delete a RAID set: 1. From the utility main menu, select 2. Delete RAID V olume and press <Enter>.
ASUS SABERT OOTH X79 4-25 Chapter 4 4.4.5 Marvell RAID utility The onboard Marvell SA T A 6.0 Gb/s controller allows you to create a RAID 0 or RAID 1 array using two SA T A hard disk drives. Refer to Chapter 2 of your motherboard user manual for the exact location of the Marvell SA T A 6.
4-26 Chapter 4: Software support Chapter 4 4. Use the up or down arrow key to move the selection bar and press <Enter> to congure further RAID settings. RAID Level: Select a RAID Level. Conguration options: [RAID 0] [RAID 1] Stripe Size: Species the size of single data block on the virtual disk.
ASUS SABERT OOTH X79 4-27 Chapter 4 6. Press <F10>. The following warning message appears: Press <Y> to save the RAID setting and exit the Marvell RAID utility . Do you want to exit from Marvell BIOS Setup? Y es N o Exit Delete an existing RAID Array 1.
4-28 Chapter 4: Software support Chapter 4 Do you want to delete this virtual disk ? Y es N o Delete Virtual Disk 2. The following warning message appears: Press <Y> to delete the selected RAID array .
ASUS SABERT OOTH X79 4-29 Chapter 4 4.5 Creating a RAID driver disk A oppy disk with the RAID driver is required when installing a Windows ® operating system on a hard disk drive that is included in a RAID set. • The motherboard does not provide a oppy drive connector .
4-30 Chapter 4: Software support Chapter 4 4.5.3 Installing the RAID driver during Windows ® OS installation T o install the RAID driver in Windows ® XP: 1. During the OS installation, the system prompts you to press the F6 key to install third- party SCSI or RAID driver .
ASUS SABERT OOTH X79 4-31 Chapter 4 4.5.4 Using a USB oppy disk drive Due to OS limitation, Windows ® XP may not recognize the USB oppy disk drive when you install the RAID driver from a oppy disk during the OS installation.
4-32 Chapter 4: Software support Chapter 4 8. Find the [HardwareIds.scsi.iaAHCI_DesktopW orkstationServer] and [HardwareIds.scsi.iaStor_DesktopWorkstationServer] sections in the txtsetup.oem le. 9. T ype the following line to the bottom of the two sections: id = “USBVID_xxxx&PID_xxxx”, “usbstor” 10.
ASUS SABERT OOTH X79 5-1 Chapter 5 Chapter 5: Multiple GPU technology support 5.1 AMD ® CrossFireX™ technology The motherboard supports the AMD ® CrossFireX™ technology that allows you to install multi-graphics processing units (GPU) graphics cards.
5-2 Chapter 5: Multiple GPU technology support Chapter 5 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately . 6. Connect a VGA or a DVI cable to the graphics card. 4. Align and rmly insert the CrossFireX bridge connector to the goldngers on each graphics card.
ASUS SABERT OOTH X79 5-3 Chapter 5 2. The VISION Engine Control Center Setup Assistant appears when the system detects the existance of multi- graphics cards.
5-4 Chapter 5: Multiple GPU technology support Chapter 5 5.2 NVIDIA ® SLI™ technology The motherboard supports the NVIDIA ® SLI™ (Scalable Link Interface) technology that allows you to install multi-graphics processing units (GPU) graphics cards.
ASUS SABERT OOTH X79 5-5 Chapter 5 4. Align and rmly insert the SLI bridge connector to the goldngers on each graphics card. Ensure that the connector is rmly in place. 5. Connect two independent auxiliary power sources from the power supply to the two graphics cards separately .
5-6 Chapter 5: Multiple GPU technology support Chapter 5 B1. If you cannot see the NVIDIA Control Panel item in step (A), select Personalize . B2. From the Personalization window , select Display Settings . B3. From the Display Settings dialog box, click Advanced Settings .
ASUS SABERT OOTH X79 5-7 Chapter 5 B4. Select the NVIDIA GeForce tab, and then click Start the NVIDIA Control Panel . B5. The NVIDIA Control Panel window appears. Enabling SLI settings From the NVIDIA Control Panel window , select Set SLI Conguration .
5-8 Chapter 5: Multiple GPU technology support Chapter 5.
ASUS contact information ASUST eK COMPUTER INC. Address 15 Li-T e Road, Peitou, T aipei, T aiwan 1 1259 T elephone +886-2-2894-3447 Fax +886-2-2890-7798 E-mail info@asus.com.tw Web site www .asus.com.tw T echnical Support T elephone +86-21-3842991 1 Online support support.
DECLARATION OF CONFORMITY Per FCC Part 2 Section 2. 1077(a) Responsible Party Name: Asus Computer International Address: 800 Corporate Way, Fremont , CA 94539.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Asus P9X79EWS c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Asus P9X79EWS - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Asus P9X79EWS, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Asus P9X79EWS va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Asus P9X79EWS, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Asus P9X79EWS.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Asus P9X79EWS. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Asus P9X79EWS ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
