Manuel d'utilisation / d'entretien du produit 1130STE XP du fabricant Husqvarna
Aller à la page of 32
1130STE XP Owner's Manual.
2 Safe Operation Practices f or Snow Thro wers IMPORT ANT : This machine is capable of amputating hands and f eet and throwing objects. F ailure to obser v e the follo wing saf ety instructions could result in ser ious injur y or death. SAFETY R ULES W ARNING: This snow thrower is for use on sidewalks, driveways and other ground le vel surfaces.
3 PR ODUCT SPECIFICA TIONS Gasoline Capacity 4.0 Quar ts and T ype: Unleaded Regular only Oil T ype SAE 30 (abov e 40°F) (API SG–SL): SAE 5W-30 or 10W -30 (0° to +40°F) SAE 0W -30 (below 0°F) Oil Capacity: 26 Ounces Spark Plug: Champion RN4C (Gap: .
4 P AR TS P A CKED SEP ARA TEL Y IN CAR T ON MAINTENANCE ..................................................... 14-15 MAINTENANCE SCHEDULE ..................................... 14 SER VICE AND AD JUST MENTS ........................... 16-18 ST ORA GE .
5 ASSEMBL Y / PRE-OPERA TION Read these instructions and this man u al in its entirety before y ou attempt to assemble or oper ate your ne w snow throw er . Y our new sno w thrower has been as sem bled at the f actor y with the ex cep tion of those par ts left unassembled f or shipping pur poses.
6 ASSEMBL Y / PRE-OPERA TION INST ALL DISCHARGE CHUTE / CHUTE RO T A TER HEAD (See Fig. 7) NO TE: The multi-wrench provided in y our par ts bag may be used to install the chute rotater head. 1. Place discharge chute assembly on top of chute base with discharge opening tow ard front of snow throw er .
7 ASSEMBL Y / PRE-OPERA TION INST ALL CHUTE DEFLECTOR REMO TE CONTROL (See Figs. 8 and 9) 1. Install remote cable br ack et to discharge chute with 5/16-18 carriage bolt, 5/16 fl at w asher and 5/16-18 lockn ut as shown.
8 OPERA TION KNO W Y OUR SNO W THR O WER READ THIS OWNER'S MANU AL AND ALL SAFETY RULES BEFORE OPERA TING Y OUR SNO W THRO WER. Compare the illustrations with y our snow throw er to familiarize y ourself with the location of various controls and adjustments.
9 MEETS A.N.S.I. SAFETY REQUIREMENTS Our snow thro wers conf or m to the standards of the American National Standards Institute. FIG. 11 OPERA TION Drive speed control le ver - used to select f orward or re verse motion and speed of sno w thrower .
10 OPERA TION T O CONTROL SNO W DISCHARGE (See Fig. 15) W ARNING: Snow thr ower s have ex- posed rotating parts, which can cause severe injury from contact, or from ma- terial thro wn from the disc harge chute. Keep the area of operation c lear of all persons, small children and pets at all times including startup.
11 T O MO VE FOR W ARD AND BA CKW ARD (See Fig. 18) SELF-PROPELLING, f orward and re verse mo vement of the snow thro wer , is controlled by the traction drive control le ver located on the left side handle . • Squeeze traction drive control le ver to handle to en gage the drive system.
12 T O ADJUST SKID PLA TES (See Fig. 20) NO TE: The wrench provided in your parts bag may be used to adjust the skid plates. Skid plates are located on each side of the auger housing and adjust the clearance between the scr aper bar and the ground surf ace.
13 T O ST ART ENGINE • Be sure fuel shut-off v alve is in the OPEN position. Y our snow thro wer engine is equipped with both a 120 V olt A.C . electr ic star ter and a recoil star ter . The electr ic star ter is equipped with a three-wire power cord and plug and is designed to operate on 120 V olt A.
14 MAINTENANCE LUBRICA TION CHART GENERAL REC OM MEN DA TIONS The warranty on this sno w throw er does not cov er items that hav e been sub ject ed to operator abuse or negligence. T o receive full v alue from the warranty , operator must maintain snow thro wer as in str uct ed in this manual.
15 MAINTENANCE SNO W THRO WER Alwa ys obser ve saf ety rules when performing main te nance. TIRES • Maintain proper air pressure in both tires (See “PROD- UCT SPECIFICA TIONS” section in this manual). • K eep tires free of gasoline / oil, which can har m rubber .
16 SER VICE AND ADJUSTMENTS W ARNING: T o av oid serious injur y , before perf orming any service or ad- just ments: 1. Be sure throttle is in ST OP position. 2. Remove safety ignition ke y . 3. Make sure the augers and all mov ing parts have completely stopped.
17 SER VICE AND ADJUSTMENTS T O REPLA CE BEL TS (See Fig. 25) The auger and traction drive belts are not adjustab le. If the belts are damaged or begin to slip from wear , they should be replaced. It is recommended that the belt(s) be replaced by a qualifi ed service center .
18 ST ORA GE Immediately prepare your sno w thrower f or storage at the end of the season or if the unit will not be used for 30 da ys or more. W ARNING: Never store the sno w thro wer with gaso line .
19 Does not start 1. Fuel shut-off v alve (if so 1. T ur n fuel shut-off valv e to OPEN position. equipped) in OFF position. 2. Saf ety ignition ke y 2. Insert safety ignition k ey . is not inserted. 3. Out of fuel. 3. Fill fuel tank. 4. Throttle in ST OP position.
20 REP AIR P ARTS A UGER HOUSING / IMPELLER ASSEMBL Y SNO W THRO WER - MODEL NO . 1130STE XP (HU1130STC), PR ODUCT NO . 954 22 30-81 22 18 21 53 19 1 3 2 6 6 5 6 6 9 12 7 7 8 6 11 27 27 30 26 25 24 23.
21 KEY P ART NO . NO . DESCRIPTION 1 532 18 86-63 Bar , Weight 2 532 16 67-85 Nut, Hex 5/16-18 3 872 11 05-10 Bolt, Carr iage 5/16-18 x 1-1/4 4 532 19 10-79 Pulley , Impeller 5 532 18 89-09 Bearing As.
22 REP AIR P ARTS CONTR OL P ANEL / DISCHARGE CHUTE SNO W THRO WER - MODEL NO . 1130STE XP (HU1130STC), PR ODUCT NO . 954 22 30-81 3 2 1 1 2 6 19 2 2 14 26 28 27 27 25 20 29 31 30 16 18 17 10 14 3 13 .
23 REP AIR P ARTS CONTR OL P ANEL / DISCHARGE CHUTE SNO W THRO WER - MODEL NO . 1130STE XP (HU1130STC), PR ODUCT NO . 954 22 30-81 KEY P ART NO . NO . DESCRIPTION 1 532 18 33-34 Knob , Lev er 2 817 50.
24 REP AIR P ARTS HANDLES SNO W THRO WER - MODEL NO . 1130STE XP (HU1130STC), PR ODUCT NO . 954 22 30-81 5 11 12 15 7 10 33 18 19 37 34 35 20 20 21 21 6 11 5 36 13 2 5 15 11 4 4 3 3 16 17 16 23 22 38 .
25 KEY P ART NO . NO . DESCRIPTION 1 532 18 41-10 Lev er , Auger Control, RH 2 532 18 41-09 Lev er , T raction Drive Control, LH 3 532 17 94-39 Nut, Cage 1/4-20 4 532 17 88-88 Bushing, Flange 5 532 16.
26 REP AIR P ARTS DRIVE SNO W THRO WER - MODEL NO . 1130STE XP (HU1130STC), PR ODUCT NO . 954 22 30-81 35 33 15 41 22 34 29 22 31 26 7 2 43 2 11 3 3 25 24 23 12 32 27 44 20 21 21 22 16 17 42 15 2 1 4 .
27 KEY P ART NO . NO . DESCRIPTION 1 532 14 63-15 Screw , He x Head 5/16-18 x 3/4 2 873 80 05-00 Nut, Lock 5/16-18 3 532 15 54-15 W asher , Flat 4 817 49 05-08 Screw , He x Head 5/16-18 x 1/2 5 532 18.
28 REP AIR P ARTS CHASSIS / ENGINE / PULLEYS SNO W THRO WER - MODEL NO . 1130STE XP (HU1130STC), PR ODUCT NO . 954 22 30-81 6 19 17 10 21 22 23 2 1 3 4 6 7 8 9 12 13 15 27 26 25 24 18 7 6 20 14 30 29 .
29 REP AIR P ARTS CHASSIS / ENGINE / PULLEYS SNO W THRO WER - MODEL NO . 1130STE XP (HU1130STC), PR ODUCT NO . 954 22 30-81 KEY P ART NO . NO. DESCRIPTION 1 532 18 10-44 Spring, T raction Idler 2 532 .
30 REP AIR P ARTS WHEELS / DECALS SNO W THRO WER - MODEL NO . 1130STE XP (HU1130STC), PR ODUCT NO . 954 22 30-81 10 32 30 15 18 17 19 10 12 31 2 7 4 3 4 13 20 11 21 33 22 23 24 10 10 25 26 28 27 29 28.
31 REP AIR P ARTS WHEELS / DECALS SNO W THRO WER - MODEL NO . 1130STE XP (HU1130STC), PR ODUCT NO . 954 22 30-81 KEY P ART NO . NO . DESCRIPTION 1 532 18 78-32 Wheel Assembly , 16", P ower Steeri.
532 19 12-90 Re v . 2 07.30.04 BY Printed in U.S .A. S E C T I ON 1: L I MIT E D W A R R A N T Y Husqvarna F orest & Garden Company (“Husqvarna”) warrants Husqv arna product to the original pu.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Husqvarna 1130STE XP c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Husqvarna 1130STE XP - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Husqvarna 1130STE XP, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Husqvarna 1130STE XP va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Husqvarna 1130STE XP, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Husqvarna 1130STE XP.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Husqvarna 1130STE XP. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Husqvarna 1130STE XP ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
