Manuel d'utilisation / d'entretien du produit PLC-XR70N du fabricant Fisher
Aller à la page of 46
Owner's Man ual PLC-XR70N Multimedia Rear -Pr ojection Displa y MODEL.
2 INFORMA TION T O THE USER NO TE : This equipment has been tested and f ound to comply with the limits for a Class A digital de vice, pursuant to P ar t 15 of FCC Rules. These limits are designed to pro vide reasonable protection against har mful interf erence when the equipment is operated in a commercial environment.
3 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners.
4 T ABLE OF CONTENTS FEA TURES AND DESIGN 5 BEFORE OPERA TION 18 COMPUTER MODE 26 VIDEO MODE 34 SETTING 38 APPENDIX 39 INST ALLA TION 6 INSTALLING THE PROJECTOR 6 PREPARING THE REMOTE CONTROLS 8 NAME .
5 FEA TURES AND DESIGN.
6 INST ALLA TION 10cm (3.9") 20cm(7.8") 20cm (7.8") 10cm(3.9") 20cm (7.8") INST ALLING THE PR OJECT OR Contact the sales dealer and request to install this projector. For installing this appliance properly, technical services are required.
7 INST ALLA TION CA UTION FOR INST ALLA TION OF THE PROJECT OR When using or installing the projector, following attention should be taken: l We recommend to avoid dusty / smoky place for operating the projector.
8 INST ALLA TION.
9 INST ALLA TION Caution for handling batteries Install batteries properly to match the "+" and "–" marks inside the case. If batteries are installed or used incorrectly, it may cause liquid leak, explosion, injury, fire hazard, or pollution.
10 INST ALLA TION Fr ont of the Pr ojector Rear of the Pr ojector NAME OF EA CH P ART OF THE PR OJECT OR PROJECTION SCREEN SPEAKERS FRONT TERMINAL STORAGE SPACES INDICATORS AND INFRARED REMOTE RECEIVER FRONT PANEL LOCK BOLT CASTER POWER CORD CONNECTOR REAR TERMINAL EXHAUST VENT Connect the AC Power Cord to this terminal.
11 INST ALLA TION CONNECTING THE A C PO WER CORD This projector uses nominal input voltages of 100 ~ 120 V AC. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system.
COMPUTER IN 2 COMPUTER IN 3 VIDEO IN 3 CONTROL PORT 2 CONTROL PORT 3 AUDIO 2 AUDIO 3 (STEREO) (STEREO) VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO L-AUDIO-R (MONO) 12 CONNECTING THE PR OJECT OR TERMINALS OF THE PR OJECT OR This projector has various kind of terminals to connect with peripheral equipment.
13 CONNECTING THE PR OJECT OR CA UTION When connecting the peripheral equipment to the projector, please observe the following precautions: l Be sure that the each equipment is turned off. l Connect the cable securely to the respective terminal. l When removing the cable, never pull the cord.
14 CONNECTING THE PR OJECT OR COMPUTER IN 1 VIDEO IN 1 CONTROL PORT 1 AUDIO 1 (STEREO) S-VIDEO VIDEO/Y C/Cb(B-Y) Cr(R-Y) COMPUTER IN 2 COMPUTER IN 3 VIDEO IN 3 CONTROL PORT 2 CONTROL PORT 3 AUDIO 2 AU.
15 CONNECTING THE PR OJECT OR COMPUTER IN 1 VIDEO IN 1 CONTROL PORT 1 AUDIO 1 (STEREO) S-VIDEO VIDEO/Y C/Cb(B-Y) Cr(R-Y).
16 CONNECTING THE PR OJECT OR CONNECTING THE VIDEO EQUIPMENT VIDEO IN 3 CONTROL PORT 3 VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO L-AUDIO-R (MONO) COMPUTER IN 1 VIDEO IN 1 VIDEO IN 2 CONTROL PORT 1 AUDIO 1 (ST.
17 CONNECTING THE PR OJECT OR VIDEO IN 3 CONTROL PORT 3 VIDEO/Y C/Cb(B-Y) Cr(R-Y) S-VIDEO L-AUDIO-R (MONO) COMPUTER IN 1 VIDEO IN 1 VIDEO IN 2 CONTROL PORT 1 AUDIO 1 (STEREO) S-VIDEO VIDEO/Y C/Cb(B-Y).
18 BEFORE OPERA TION CONTR OLS OF FR ONT P ANEL (Within Right Door) FINE SYNC VOLUME MODE MENU SELECT ON-OFF NORMAL SYSTEM + + - - SYSTEM BUTTON Used to select computer system in Computer mode, or color system in Video mode.
19 BEFORE OPERA TION.
Used to select source among Video 1 ~ 3. 20 BEFORE OPERA TION Wireless Remote Contr ol Unit VOLUME MUTE SYSTEM MENU P C FINE SYNC . ON-OFF NORMAL FREEZE VIDEO PC BUTTON Used to select source among Computer 1 ~ 3. FINE SYNC BUTTON Use to adjust fine sync.
21 BEFORE OPERA TION VOLUME FINE SYNC. P C SYSTEM MUTE MENU FREEZE NORMAL ON-OFF VIDEO SELECT PC BUTTON Used to select source among Computer 1 ~ 3. VIDEO BUTTON Used to select source among Video 1 ~ 3. MENU BUTTON Used to activate the MENU operation. SYSTEM BUTTON Used to select computer system in computer mode, or color system in video mode.
22 BEFORE OPERA TION HO W T O OPERA TE ON-SCREEN MENU FLO W OF ON-SCREEN MENU Display ON-SCREEN MENU Press MENU button to display the ON-SCREEN MENU (MENU BAR). The red frame is the POINTER. Select the ITEM by pressing SELECT button. The dialog box of the ITEM appears.
23 BEFORE OPERA TION MENU B AR SYSTEM MENU Used to select a computer system. (Refer to P27) IMAGE MENU Used to adjust the computer image. [Fine sync. / Total dots / Contrast / Brightness] (Refer to P29) PC ADJUST MENU Used to adjust the parameters to match with the input signal format.
24 B ASIC OPERA TION T urning on the Pr ojector Connect the projector's AC power cord into a wall outlet and turn the MAIN ON/OFF switch (located on the Front Control) to the ON position. The LAMP POWER indicator lights RED, and the READY indicator lights GREEN.
25 B ASIC OPERA TION Sound Volume Adjustment Press the VOLUME (+/–) buttons (located on the Front Control or on the Remote Control Units) to adjust the volume. The Volume dialog box appears on the screen for a few seconds. (+) button to increase the volume, and (–) button decreasing.
26 COMPUTER MODE SELECTING COMPUTER MODE Direct Operation Press the MODE button on the Front Control or the PC button on Remote Control Units. Select the Mode among Computer1 to Computer 3 corresponding with the input source.
27 COMPUTER MODE SELECTING COMPUTER SYSTEM A utomatic Multiscanning system This projector automatically adapt to most different types of computer based on VGA, SVGA or XGA (refer to "COMPATIBLE COMPUTER SPECIFICATION" on page 28).
28 COMPUTER MODE PC ADJUSTMENT This Projector can automatically detect display signals from most personal computers currently distributed. However, some computers employ special signal formats which are different from the standard ones and may not be detected by this projector.
29 COMPUTER MODE COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this projector can accept the signal from all computers with the V, H-Frequency below mentioned and less than 135 MHz of Dot Clock. NOTE : Specifications are subject to change without notice.
30 COMPUTER MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT (REAR CLICK) button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear.
31 COMPUTER MODE The Auto Image function is provided to automatically adjust Fine sync., Total dots, and Picture Position for most computers. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select AUTO IMAGE and press the SELECT (REAR CLICK) button.
32 COMPUTER MODE PICTURE POSITION ADJUSTMENT The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select POSITION and press the SELECT (REAR CLICK) button.
33 COMPUTER MODE When "Panning" of the PICTURE SCREEN Menu is selected, the display of "Quit" is appearing on the screen. Press the POINT buttons to move the image vertically or horizontally. When pressing the SELECT button, the "Panning" mode is terminated and the ON-SCREEN Menu appears.
Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select Video and press the SELECT (REAR CLICK) button. Another dialog box VIDEO MODE Menu will appear. 34 VIDEO MODE SELECTING VIDEO MODE Direct Operation Press the MODE button on the Front Control or the VIDEO button on the Remote Control Units.
35 VIDEO MODE SELECTING COLOR SYSTEM Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SYSTEM and press the SELECT (REAR CLICK) button. Another dialog box VIDEO SYSTEM Menu will appear. (The display also appears by pressing the SYSTEM button on the Front Control or the Remote Control Units.
36 VIDEO MODE PICTURE IMA GE ADJUSTMENT Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT (REAR CLICK) button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear.
37 VIDEO MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the image in desirable size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT (REAR CLICK) button.
38 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT (REAR CLICK) button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear.
39 APPENDIX OPERA TING WIRELESS MOUSE installation The Wireless Remote Control Unit is not only able to operate the projector but also usable as a wireless mouse for a PC. One Pointing Pad (POINT button) and two click buttons are used for wireless mouse operation.
40 APPENDIX MOUSE/KEYBO ARD CONNECTION Connecting Mouse/K eyboar d to the Projector Connect the Mouse/Keyboard Cable(s) in the Storage Cabinet (left side) to your computer as the figure below. Be sure to connect the cable(s) corresponding with your computer.
41 APPENDIX MAINTENANCE TEMPERA TURE W ARNING INDICA T OR The TEMPERATURE WARNING Indicator flashes red when the internal temperature of the projector exceeds the normal temperature. The Indicator stops to flash when the temperature of the projector become normal.
42 APPENDIX LAMP REPLA CEMENT Indicator When the Lamp of this projector draws to an end, the LAMP REPLACEMENT indicator lights yellow. When the image become dark or the color of the image become unnatural, replacement of the Lamp is required. Turn off the projector and disconnect the AC plug.
43 APPENDIX TR OUBLESHOO TING Before calling your dealer or service station for assistance, check the matters below once again. 1. Make sure you have connected the projector to your equipment a s described in section "CONNECTING THE PROJECTOR" on pages 12 ~ 17.
44 APPENDIX SPECIFICA TIONS Rear -Pr ojection Displa y LCD Rear-Projection Display 1,024 ´ 768 dots 1.3" TFT Active Matrix type ´ 3 800 TV lines F = 2.5 / f = 23.7 mm UHP, 120watt type 70" (4 : 3) ~80kHz (H-sync.), ~100Hz (V-sync.) 6 color system (PAL, SECAM, NTSC, NTSC 4.
45 APPENDIX Remote Contr ol T ransmitters AA Type ´ 2 5 m ( 16.4' ) / 60° Power Source Operating Range WIRED REMO TE CONTROL 56mm ´ 35mm ´ 193mm ( 2.2" ´ 1.4" ´ 7.6" ) 105 g ( 0.23 lbs ) ( including the batteries ) Dimensions (W ´ ´ H ´ ´ D) Net Weight AA Type ´ 2 5 m ( 16.
1YEAR In order to obtain warranty service, the product must be delivered to and picked up from and Authorized Sanyo Factory Service Center at the user's expense, unless specifically stated otherwise in this warranty. the names and addresses of authorized Sanyo Service Centers may be obtained by calling the toll-free number listed below.
Un point important après l'achat de l'appareil (ou même avant l'achat) est de lire le manuel d'utilisation. Nous devons le faire pour quelques raisons simples:
Si vous n'avez pas encore acheté Fisher PLC-XR70N c'est un bon moment pour vous familiariser avec les données de base sur le produit. Consulter d'abord les pages initiales du manuel d'utilisation, que vous trouverez ci-dessus. Vous devriez y trouver les données techniques les plus importants du Fisher PLC-XR70N - de cette manière, vous pouvez vérifier si l'équipement répond à vos besoins. Explorant les pages suivantes du manuel d'utilisation Fisher PLC-XR70N, vous apprendrez toutes les caractéristiques du produit et des informations sur son fonctionnement. Les informations sur le Fisher PLC-XR70N va certainement vous aider à prendre une décision concernant l'achat.
Dans une situation où vous avez déjà le Fisher PLC-XR70N, mais vous avez pas encore lu le manuel d'utilisation, vous devez le faire pour les raisons décrites ci-dessus,. Vous saurez alors si vous avez correctement utilisé les fonctions disponibles, et si vous avez commis des erreurs qui peuvent réduire la durée de vie du Fisher PLC-XR70N.
Cependant, l'un des rôles les plus importants pour l'utilisateur joués par les manuels d'utilisateur est d'aider à résoudre les problèmes concernant le Fisher PLC-XR70N. Presque toujours, vous y trouverez Troubleshooting, soit les pannes et les défaillances les plus fréquentes de l'apparei Fisher PLC-XR70N ainsi que les instructions sur la façon de les résoudre. Même si vous ne parvenez pas à résoudre le problème, le manuel d‘utilisation va vous montrer le chemin d'une nouvelle procédure – le contact avec le centre de service à la clientèle ou le service le plus proche.
